Topic: [ANN][SLG] Sterlingcoin v1.6.1.1 | United Kindom | Cryptopia - page 16. (Read 464486 times)

Hello new friendly Sterlingcoiner!  

Yes, you are correct, this is a very promising coin indeed!

Congratulations on bringing in 5 new investors   ; that is quite an achievement.  Well done.

I personally believe that there will be a good price increase in tome; just be patient.  


Sterling Sentinel

how much we are waiting for the flight to the moon! developers and the team is super. In the next year we will get to bittrex

Hello Mery33. Thank you for yours and your friends investments and interest. Thank you for also sharing that and your enthusiasm!

Sterling Sentinel, thank you also for sharing your good news. You may be observing a combination of things. As you know, recent network fortifications were done to retain our listing on Cryptopia. Every VPS I have access to now runs a Sterlingcoin node. These will remain online 24/7 and have all the redundancies of modern data centers, generators, etc. Also friends and colleagues brought nodes online when learning of the Cryptopia situation. These nodes will stay online consistently, but perhaps short of 24/7 and might lack power outage protection. But still, their contribution is greatly appreciated.

At any rate, it is great to see a strong network! It will be getting even stronger once the CWI seednodes are brought fully online. Only 7 of the 25 currently are online. I was recently given a 1 month estimation for the other 18.

Thank you everyone that is running a node as often as possible. Especially if you are staking. This does help the Sterlingcoin network and is greatly appreciated.

Friend hello! What would I know, this is a very promising coin! I personally brought in 5 investors! soon we are waiting for a good price increase!

Hi all.

Ive been noticing recently that I have been picking up a lot more connections during syncing//staking.
Ordinarily I get about 7-8 connections.  Recently I've been getting 24-28.
Right now I've got 30 connections which, for me, is something of a record. 

Has something happened re Sterlingcoin network that I am not aware of?   


Sterling Sentinel

Yes, restoring that wallet.dat should work. Yes, in my experiment it does.

My Pi is running Sterlingcoin and will do so after a reboot, yes.

If you did get it to build and you did get it to execute, I think you need to look elsewhere for the problem starting your Pi. I am not using systemd to start Sterlingcoin, so I can't simulate that specifically.

Depending on your balance and how many other coins are actively being staked on the network, once a month should suffice, yes. I would guess you might have to do so for 12 hours at minimum to have certainty you will yield 5.5% annual. Of course, doing so more often helps the network.

Hello CryptoCanary

Should restoring the original empty wallet.dat and rebooting the Pi work? Because it didnt

Should I rebuild? Am I right in thinking I would get pretty much the same interest if I opened my Sterlingcoin wallet to stake once a month?

Hey mafia

I can see from the instruction set you have been working on that you are using Berkeley DB 4.8 in your Pi build. Windows Sterlingcoin wallets have used Berkeley DB 6.1 since at least v1.5, perhaps earlier. The Mac SLG build was updated to use Berkeley DB 6.1 to conform with the Windows builds in SLG v1.6.

To maintain portability of the wallet.dat file, you would have to build Berkeley DB 6.1 on your Pi. Alternatively, you could continue to use DB 4.8 on your Pi, but you would have to send the coins in an actual transaction from the other wallet. I suspect this is the root cause of the issue you are experiencing.

Thanks p3ppymon.

Master nodes have been mentioned numerous times. While I will refrain from any timeframe-commitment to the community, a community that has been left disappointed far too many times, because of my personal life commitments the winter months do allow for much more development time. Off course, this would be incorporated into the current rebase plans.

Sorry for the delay in fielding your question, p3ppymon.

Hey CryptoCanary

Quick update on this. I rebooted my Raspberry Pi because I was getting an error after restoring my wallet.dat and now it is stuck on the attached screen on bootup. You can actually SSH to the raspberry pi for about 10 minutes at on bootup. I ran sudo systemctl disable sterlingcoin.service but it made no difference. I left it on this screen for 24 hours before I started to rebuild it.

https://www.dropbox.com/s/9281rvdhze0g67k/error.jpg?dl=0


EDIT: This is the first time I have rebooted my Pi since install

I finally did get a Raspberry Pi for myself. Because I installed and used different code prior, I was not able to test mafia's instructions verbatim, but thank you mafia for documenting this. However; I do have one thing I encountered that might help others.

If you get errors during compile like "error: cannot convert 'CBigNum*' to 'BIGNUM*' ... ", it comes from libssl1.1 incompatibility. Libssl 1.1 changed the way these calls need to be made. I did look into modifying the existing code to work with libssl1.1 but, those needed changes do look to be much deeper than I had hoped. Upon researching it, it does look like a problem facing many coins. I will continue rooting out and making all the needed changes, but after a weekend of doing so, I wanted my new Pi (3 model B) running a coin already.

The work-around I used to get SLG compiled was to install an older SSL library,


It is still syncing and I have yet to conduct test transactions. I do think those test will be fine, once I can conduct them.

I hope this information might be found useful to anyone facing the same mentioned errors.

Thanks gonna try this weekend!!

Installing Sterlingcoin on Raspberry Pi
For we will be using Raspian Jessie Lite

Update the OS:
sudo apt-get update
sudo apt-get dist-upgrade


Install packages:
sudo apt-get install git automake libssl-dev libboost1.55-all-dev libboost-all-dev libminiupnpc-dev eject
sudo apt-get install build-essential
sudo apt-get install libdb++-dev
sudo apt-get install libqrencode-dev

Compile BerkeleyDB:
cd ~
wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
sudo tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
../dist/configure --enable-cxx
make   
sudo make install

Set Swap file. *Might not be required for Raspberry pi 3 but I did it anyway:
sudo nano /etc/dphys-swapfile

We need to change this:
CONF_SWAPSIZE=100

This to:
CONF_SWAPSIZE=1024

Stop and start the service that manages the swapfile on Rasbian:
sudo /etc/init.d/dphys-swapfile stop
sudo /etc/init.d/dphys-swapfile start


Set environmental variables for compiling– NOTE: these 2 need to be run again if you get disconnected from SSH:
export CPATH="/usr/local/BerkeleyDB.4.8/include"
export LIBRARY_PATH="/usr/local/BerkeleyDB.4.8/lib"

Variables for running Sterlingcoin:
sudo nano /etc/ld.so.conf.d/daemon-libs.conf    

Copy and paste:
/usr/local/BerkeleyDB.4.8/lib/

Save the config file and reload config
sudo ldconfig



Download Sterlingcoin:
git clone https://github.com/Sterlingcoin/Sterlingcoin-1.6.0.1-Release.git
cd Sterlingcoin-1.6.0.1-Release
cd src
make -f makefile.unix


Create the config:
mkdir ~/.sterlingcoin
nano ~/.sterlingcoin/sterlingcoin.conf

Copy, paste and modify:
rpcuser=[ReplaceWithRandomCharacters]
rpcpassword= [ReplaceWithRandomCharacters]


Download the latest sterlingcoin bootstrap to your PC, unzip and upload via SSH (I used Filezilla) to ./Sterlingcoin
http://sterlingcoin.org/SterlingcoinBootstrap796871.zip

Create a Steringcoin service so Sterlingcoin will auto load on startup:
sudo nano /etc/systemd/system/Sterlingcoin.service
Copy and paste   
[Unit]
Description=Sterlingcoin
[Service]
User=pi
ExecStart=/home/pi/Sterlingcoin-1.6.0.1-Release/src/sterlingcoind
WorkingDirectory=/home/pi/Sterlingcoin-1.6.0.1-Release/src/
Restart=always
[Install]
WantedBy=multi-user.target


Enable and start the service:
sudo systemctl daemon-reload
sudo systemctl enable Sterlingcoin.service
sudo systemctl start Sterlingcoin.service

Check status:
sudo systemctl status Sterlingcoin.service
   

Thanks for confirming this!  It really is great news for SLG. 

Well done to everyone in this great wee community.   

Onward and upward!


Sterling Sentinel

I will try and get this done for the community by end of this week Thanks everyone for your help!

Thanks again!!

This is a very good news indeed. Congrats dev and the community which supported.
@dev.
Is there any plan for the near future for your token? Any future development, novel feature?

I am so very pleased to announce,

The delisting from Cryptopia has been stopped! Citing the community demand to retain the listing, the warning and planned delisting have been removed. Thank you so much, Sterlingcoiners!

On that note I feel confident in saying, Happy Birthday Sterlingcoin!

... will display your current block height. Currently, "blocks" : 825661


... will unlock for 999999 minutes (months)


... will also display how many and how many are actively being staked.


I suggest not unlocking the wallet until after it has fully synced. You can watch your block height to gauge that.

I hope this info is helpful!

Could you please compile all the instructions in one post?
It would help a lot
I have an raspberry available