[ANN][SRC] Securecoin | A Fast and Secure Version of Bitcoin | 2013 - page 35.

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: murraypaul on September 04, 2013, 05:46:17 PM

Good to hear it is all working now.
Sometimes you just get a blind spot from staring at something, but it is obvious to fresh eyes what is wrong.

You got that right! lol

Hey is the pool report for earned src per day, based on hash, fairly accurate?

murraypaul

sr. member

Activity: 476

Merit: 250

Good to hear it is all working now.
Sometimes you just get a blind spot from staring at something, but it is obvious to fresh eyes what is wrong.

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: murraypaul on September 04, 2013, 05:31:49 PM

Yup, going to say the same thing. Worker name should start with your coinpool username, as in my example.
If you go to My Account->My Workers, it will tell you what workers you have defined.

Edit: Ah, I think you took this bit of the getting started instructions a little too literally:
URL:    http://src.coinmine.pl
Stratum PORT:    6020
Username:    worker_name
Password:    password

You have to define a worker in the My Workers section, and the worker password isn't related to you logon password for the pool website.

HEY!! that was all it was Undecided

how embarassing,,,ok, you have been a big help! its hashing!

ill create a new bat file and slowly move over some cpu's and try the pool out. thanks so much...i dont like to be stumped over something so simple lol,,,,

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: murraypaul on September 04, 2013, 05:31:49 PM

Yup, going to say the same thing. Worker name should start with your coinpool username, as in my example.
If you go to My Account->My Workers, it will tell you what workers you have defined.

Edit: Ah, I think you took this bit of the getting started instructions a little too literally:
URL:    http://src.coinmine.pl
Stratum PORT:    6020
Username:    worker_name
Password:    password

You have to define a worker in the My Workers section, and the worker password isn't related to you logon password for the pool website.

ahhhh I think you just answered my previous question...Ill try it that way in just a few..thx agin!

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: feeleep on September 04, 2013, 05:23:33 PM

Quote from: MinermanNC on September 04, 2013, 05:00:20 PM

Quote from: murraypaul on September 04, 2013, 02:18:34 PM

Why don't you post the full commandline you are using, and the output you are getting, and maybe someone can spot something off?

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\System32>cd ..

C:\Windows>cd ..

C:\>cd Users\office\Desktop\New folder\quark-v2_w64.zip\quark-v2_w64
The system cannot find the path specified.

C:\>cd Users\office\Desktop\New folder\quark-v2_w64\quark-v2_w64

C:\Users\office\Desktop\New folder\quark-v2_w64\quark-v2_w64>minerd64_sse4.exe -
a quark -o stratum+tcp://src.coinmine.pl:6020 -u worker_Izuxxx.1 -p xx
[2013-09-04 16:57:53] 2 miner threads started, using 'quark' algorithm.
[2013-09-04 16:57:53] Binding thread 0 to cpu 0
[2013-09-04 16:57:53] Starting Stratum on stratum+tcp://src.coinmine.pl:6020
[2013-09-04 16:57:53] Binding thread 1 to cpu 1
[2013-09-04 16:57:54] Stratum authentication failed
[2013-09-04 16:57:54] ...retry after 30 seconds

Ok, whats my problem?...lol THX!!

check your worker name - I dont see 'worker_Izuxxx.1' or even anything starting with 'worker' in database Wink

how would I define my worker in the command line? do i need the "worker_name.1" or just "name.1" my workers name does not begin with worker.... its Izuxxx.1 password xx. Ill try it without the worker_ in front of name...I thought i had tried that tho... and was how i read it in the getting started section

thx Ill let ya know!

murraypaul

sr. member

Activity: 476

Merit: 250

Yup, going to say the same thing. Worker name should start with your coinpool username, as in my example.
If you go to My Account->My Workers, it will tell you what workers you have defined.

Edit: Ah, I think you took this bit of the getting started instructions a little too literally:
URL:    http://src.coinmine.pl
Stratum PORT:    6020
Username:    worker_name
Password:    password

You have to define a worker in the My Workers section, and the worker password isn't related to you logon password for the pool website.

feeleep

legendary

Activity: 1197

Merit: 1000

Quote from: MinermanNC on September 04, 2013, 05:00:20 PM

Quote from: murraypaul on September 04, 2013, 02:18:34 PM

Why don't you post the full commandline you are using, and the output you are getting, and maybe someone can spot something off?

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\System32>cd ..

C:\Windows>cd ..

C:\>cd Users\office\Desktop\New folder\quark-v2_w64.zip\quark-v2_w64
The system cannot find the path specified.

C:\>cd Users\office\Desktop\New folder\quark-v2_w64\quark-v2_w64

C:\Users\office\Desktop\New folder\quark-v2_w64\quark-v2_w64>minerd64_sse4.exe -
a quark -o stratum+tcp://src.coinmine.pl:6020 -u worker_Izuxxx.1 -p xx
[2013-09-04 16:57:53] 2 miner threads started, using 'quark' algorithm.
[2013-09-04 16:57:53] Binding thread 0 to cpu 0
[2013-09-04 16:57:53] Starting Stratum on stratum+tcp://src.coinmine.pl:6020
[2013-09-04 16:57:53] Binding thread 1 to cpu 1
[2013-09-04 16:57:54] Stratum authentication failed
[2013-09-04 16:57:54] ...retry after 30 seconds

Ok, whats my problem?...lol THX!!

check your worker name - I dont see 'worker_Izuxxx.1' or even anything starting with 'worker' in database Wink

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: murraypaul on September 04, 2013, 02:18:34 PM

Why don't you post the full commandline you are using, and the output you are getting, and maybe someone can spot something off?

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\System32>cd ..

C:\Windows>cd ..

C:\>cd Users\office\Desktop\New folder\quark-v2_w64.zip\quark-v2_w64
The system cannot find the path specified.

C:\>cd Users\office\Desktop\New folder\quark-v2_w64\quark-v2_w64

C:\Users\office\Desktop\New folder\quark-v2_w64\quark-v2_w64>minerd64_sse4.exe -
a quark -o stratum+tcp://src.coinmine.pl:6020 -u worker_Izuxxx.1 -p xx
[2013-09-04 16:57:53] 2 miner threads started, using 'quark' algorithm.
[2013-09-04 16:57:53] Binding thread 0 to cpu 0
[2013-09-04 16:57:53] Starting Stratum on stratum+tcp://src.coinmine.pl:6020
[2013-09-04 16:57:53] Binding thread 1 to cpu 1
[2013-09-04 16:57:54] Stratum authentication failed
[2013-09-04 16:57:54] ...retry after 30 seconds

Ok, whats my problem?...lol THX!!

murraypaul

sr. member

Activity: 476

Merit: 250

Why don't you post the full commandline you are using, and the output you are getting, and maybe someone can spot something off?

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: baritus on September 04, 2013, 11:01:32 AM

The improved site will be up today. There is also Cryptoave, a paper wallet, and likely poker integration on the way.

I still as of last nite was getting a "failed to connect to stratum" when trying to get in src.coinmine?? connects to all other p2p pools fine using minerd64...any suggestion?

Lauda

legendary

Activity: 2674

Merit: 2965

Terminated.

How about we all mine some SRC?

baritus

legendary

Activity: 966

Merit: 1052

The improved site will be up today. There is also Cryptoave, a paper wallet, and likely poker integration on the way.

Aggrophobia

legendary

Activity: 1078

Merit: 1001

any services in the make ?

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: jdebunt on September 04, 2013, 09:45:09 AM

Quote from: MinermanNC on September 04, 2013, 09:03:35 AM

do you have a website or anything for your pool to see any stats at all?

http://www.japool.com:17339/static , you can click on "Last Blocks" and "Payout" to see stats

Got it! THX. just added 2 more cpus....have 4 now will add more thru the day...still have a 6 core i have to put in a board,,,it sitting on a shelf,,,,lol,,,but before i do all that just want to make sure i want to mess with cpu mining ,my gpu's keep me busy as it is,,k, thx

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: MinermanNC on September 04, 2013, 09:03:35 AM

do you have a website or anything for your pool to see any stats at all?

http://www.japool.com:17339/static , you can click on "Last Blocks" and "Payout" to see stats

MinermanNC

legendary

Activity: 2198

Merit: 1000

Quote from: thcst8 on August 30, 2013, 06:16:50 PM

I setup a p2pool (2%) for securecoin.

Please join and provide any feedback! Grin

Quick tutorial:
1. Get minerd64_sse4.exe here http://www.japool.com/quark-v2_w64.zip

2. Run this at cmd prompt but put in your Securecoin wallet address!

Code:

minerd64_sse4.exe -a quark -t 8 -o http://www.japool.com:17339 --userpass=YourSecurecoinWalletAddress:AnyPassword

*Change this "-t 8" to the number of cores you have I have 8. If you have 4 cores change it to "-t 4" if you have 2 cores change it to "-t 2"

Hey I have 3 cpus running on your pool right now,,,all seems fine, payouts flowing in...only at 290 k/hash right now but have much more yet to set up on other pc's Ok, do you have a website or anything for your pool to see any stats at all?

EDIT: Iam watching to see now if my payouts increase as I add more cpu's?....will post back on that

thcst8

sr. member

Activity: 392

Merit: 250

Quote from: MinermanNC on September 03, 2013, 11:52:53 PM

Finally...I got my wallet to sync up and connect! yeah

I still cant get my minerd64 to connect to src.coinmine...maybe tomorrow...lol

Just a quick test download this miner http://www.japool.com/quark-v2_w64.zip and try out my p2pool:

Code:

minerd64_sse4.exe -a quark -t 8 -o http://www.japool.com:17339 --userpass=YourWalletAddress:AnyPassword

Change this "-t 8" to the number of cores you have. If you have 4 cores change it to "-t 4"

I tested this and verified it works on my i7

MinermanNC

legendary

Activity: 2198

Merit: 1000

Finally...I got my wallet to sync up and connect! yeah

I still cant get my minerd64 to connect to src.coinmine...maybe tomorrow...lol

DryPowder

full member

Activity: 144

Merit: 100

Quote from: gigawatt on September 03, 2013, 04:17:30 PM

So... do we have a blockchain explorer yet?

+1

smscotten

full member

Activity: 140

Merit: 100

Quote from: akabane on September 03, 2013, 04:51:27 PM

Local hashrate on p2pool is not correctly reported you have to look at Pool rate which is about 12-13 MB/s.

Hmm. So it's the total pool (call it 13Mh/s) that is finding five blocks per hour?

OK... rough math then I should be getting something like one per day on average. 40 hours with nothing is well within normal variance. Lets see what the next 40 hours brings!

Thanks for setting me straight.

Topic: [ANN][SRC] Securecoin | A Fast and Secure Version of Bitcoin | 2013 - page 35. (Read 195438 times)