Pages:
Author

Topic: [ANN][VRM] Verium PoWT | CPU mining | scrypt² | Scaling | New Roadmap Released - page 15. (Read 250023 times)

legendary
Activity: 1022
Merit: 1005
Those having trouble with the poolinator pool should try the Bloxstor pool, been mining there for the past few days and no errors and such. Auto-payout can be set from 5-150 with a fee of 0.2 VRM.
For manual payout, you need to cash out a minimum of 30 coins with the same 0.2 fee.
member
Activity: 134
Merit: 10
hi,
why the rise on (bittrex) this coin, can't find news about it?
hero member
Activity: 701
Merit: 511
ive been mining on main pool but i have to stop wasting my time on it...this coin has a huge dificulty...cant get mutch even with 8 core cpu...
so please....its IMPOSSIBLE to reach the minim 100 of cashout....
please LOWER MIN CASHOUT...
thats the reason why almost anyone isnt mine it....its impossible
full member
Activity: 167
Merit: 100
The Matrix lost my mind through the cracks!
Just left a sell order for VRM on Bittrex @ 0.05 sats... Only a 1.25M supply and its sister chain VRC is trading at Bittrex, Poloniex - many exchanges.
full member
Activity: 168
Merit: 100
https://vrm.poolinat0r.com
I haven't received the latest payment
About two days ago, my balance of the mine pool was about 90 VRM. There was an automatic payment behavior, but I didn't receive my coins

Is the mine pool here? I can't send mail to contact you and always make mistakes
newbie
Activity: 27
Merit: 0
hi,
i downloaded precompiled cpu miner from here
Quote

when i run it my cpu usage get 100% so does my memory and disk usage. all three to 100%. I am mining ether/sia using claymore at the same time. i am using ssd and 4gb ram. i want to maximize my rig to mine on both cpu and gpu. i dont know what causing my disk to 100%. if memory at 100% should be fine right? claymore is using around 45% of my ram. my cpu is i3-7100. i am using cpuminer-aes-avx2. please help.

thanks!

Claymore ETH + Cpuminer VRM right?

Well, on my AMD a10 5800k (4T) RAM 8GB cpuminer (VRM) uses 45% of RAM (about 4GB)

If you have 4 flood + 45% of your 4GB RAM = 1.8 GB.
So you need about 3.6 GB on Cpuminer (VRM) + 1.8 GB on Claymore (ETH). I think it will be optimal to extend RAM up to 6GB and virtual memory (paging file) to expand up to 16GB  Roll Eyes
newbie
Activity: 22
Merit: 0
newbie
Activity: 1
Merit: 0
hi,
i downloaded precompiled cpu miner from here
Quote

when i run it my cpu usage get 100% so does my memory and disk usage. all three to 100%. I am mining ether/sia using claymore at the same time. i am using ssd and 4gb ram. i want to maximize my rig to mine on both cpu and gpu. i dont know what causing my disk to 100%. if memory at 100% should be fine right? claymore is using around 45% of my ram. my cpu is i3-7100. i am using cpuminer-aes-avx2. please help.

thanks!
newbie
Activity: 30
Merit: 0
Even I think the 100 VRM limit for manual payment is too much. It only favors large miners. Again, the auto payout of minimum 10 VRM does not favor small miners. One has to wait for a month to get 10 VRMs.

The main poolinat0r pool is 15 for autopayout Sad

So its bad enough that the transaction fee is around £0.50 and I thought the reason for having a manual payout request was for when you could not earn the minimum autopayout.

So I think the autopayout should be lowered the manual payout to be just above the transaction fee so people who cannot get close to the auto payout can still at least have a tiny amount of VRM !

So yeh cut the 3 VRM £3.64 fee right down and lower the auto payment this way more people will want to mine on the poolinat0r pool and most likely donate more to cover the pool owners overheads. Instead of feeling stuck to get there minimum payout and never return to the pool once they have cashed out.
newbie
Activity: 27
Merit: 0
Hi all, i'm new in the mining world and i have some questions.

I'm using cpuminer (windows binaries), i'm mining VRM in a pool (bloxstor) , i have some  "accepted X/X"

I have read that thoses "accepted" are shares, but my shares counter is always = 0 Sad

https://s2.postimg.org/l3kchbpyh/Nouvelle_image_1.jpg

for instance, the screenshot shows i have found somthing for the block n° 106368 (console), but in statistics my shares are 0 ...

So "accepted" lines are shares ?
Is it normal my shares count always at 0 ?

thank you in advance. (sry for my english)

A couple of hours, to be sure, work. The block you found?
newbie
Activity: 1
Merit: 0
Hi all, i'm new in the mining world and i have some questions.

I'm using cpuminer (windows binaries), i'm mining VRM in a pool (bloxstor) , i have some  "accepted X/X"

I have read that thoses "accepted" are shares, but my shares counter is always = 0 Sad

https://s2.postimg.org/l3kchbpyh/Nouvelle_image_1.jpg

for instance, the screenshot shows i have found somthing for the block n° 106368 (console), but in statistics my shares are 0 ...

So "accepted" lines are shares ?
Is it normal my shares count always at 0 ?

thank you in advance. (sry for my english)
wgd
legendary
Activity: 1815
Merit: 1005
effectsToCause where is marketing campaign?  Roll Eyes i dont see it
newbie
Activity: 27
Merit: 0
I have left Verium on for quite few days now...but doesn't show anything...how long does it take to see the first coin...plz help!
Solo mining or pool?

Solo!

Should I go for pool? If so, which is the best?

Yes, go to the pool -
https://vrm2.poolinat0r.com (for slow miners when the hash rate around 1000H/m.
https://vrm2.poolinat0r.com (more nimble)
or go to
vrm.bloxstor.com (they have different ports for optimal speed
3008 stratum+tcp://vrm.bloxstor.com:3008 .1 to .5 ~2000 - 8000 H/m
3009 stratum+tcp://vrm.bloxstor.com:3009 .005 to .05 <= 2000 H/m
3010 stratum+tcp://vrm.bloxstor.com:3010 .05 to .5 ~1000 - 3000 H/m
3011 stratum+tcp://vrm.bloxstor.com:3011 .5 to 1.0 >= 6000 H/m
Download miner for Windows 3.4.6 here or find cpuminer-opt 3.6.6 (there works too)
https://drive.google.com/file/d/0B0lVSGQYLJIZRlJzSzRHd3QwV0k/view?usp=sharing

If someone does not hard sign up for a new cryptocurrency (opening 10.10.2017) and get 100 shares as a gift (they will be profitable) https://wcex.co/?ref=q1QdbG9
full member
Activity: 183
Merit: 100
I have left Verium on for quite few days now...but doesn't show anything...how long does it take to see the first coin...plz help!
Solo mining or pool?

Solo!

Should I go for pool? If so, which is the best?
newbie
Activity: 27
Merit: 0
mine in vps

after 1 hours not Accepted hash in miner  
and not show my hash in
https://vrm.bloxstor.com/index.php?page=statistics&action=pool

Not showing the hash because either in a. bat file is not correct the password to the worker or in the settings on the website in worker should not flag as "monitoring". Or everything works, but after 1 hour, the display disappears? Well, try to clean the hash of the browser. Hardly the case in VPS
newbie
Activity: 36
Merit: 0
mine in vps

after 1 hours not Accepted hash in miner  
and not show my hash in
https://vrm.bloxstor.com/index.php?page=statistics&action=pool
newbie
Activity: 27
Merit: 0
I have left Verium on for quite few days now...but doesn't show anything...how long does it take to see the first coin...plz help!
Solo mining or pool?
full member
Activity: 183
Merit: 100
I have left Verium on for quite few days now...but doesn't show anything...how long does it take to see the first coin...plz help!
newbie
Activity: 27
Merit: 0
Hi all! Please share with me your results of mining on the scrypt algorithm:1048576. I in turn will share the results of their observations  Roll Eyes. My hash rate:
1. Intel Atom N455 1.9 H/s 15W (netbook)
2. 2x Xeon 3200DP (800/2mb) Socket 604 4.8 H/s 312W (server)
3. 2x Xeon 3400DP (800/1mb) Socket 604 4.5 H/s 315W (server)
4. Intel Pentium 2020M 8.8 H/s 35W (laptop)
5. AMD A10 5800K 11.8 H/s 250W (desktop)
newbie
Activity: 22
Merit: 0
Pages:
Jump to: