[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 31.

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: lasybear on June 04, 2014, 08:06:02 AM

Quote from: Amph on June 04, 2014, 06:43:26 AM

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

100kh/s more on what? x11 and x13? both?

Quote from: lasybear on June 04, 2014, 05:34:01 AM

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

and 1% fee.

the math is still in his favor

100kh/s more is like 1/30 for 1/100 fee

You're so funny )
This is not a miner quality, but kernels code optimisations.
Ok. Look.
Girino's

Code:

sgminer  - Started: [2014-06-04 16:02:10] - [0 days 00:01:34]
--------------------------------------------------------------------------------
(5s):2.876M (avg):2.854Mh/s | A:17  R:1  HW:0  WU:0.052/m
ST: 0  SS: 0  NB: 9  LW: 165  GF: 0  RF: 0
Connected to Trademybit (stratum) diff 0.005 as user someone.5
Block: 1ecd4b32...  Diff:34  Started: [16:03:42]  Best share: 0.313
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  64.0C 1049RPM | 2.866M/2.902Mh/s | A:18 R:  5.3% HW:0 WU:0.052/m rI:81920
--------------------------------------------------------------------------------
[16:02:28] Accepted 71450cce Diff 0.009/0.005 GPU 0 at Trademybit
[16:02:34] Accepted 1ef085e5 Diff 0.032/0.005 GPU 0 at Trademybit
[16:02:40] Accepted 71108ca2 Diff 0.009/0.005 GPU 0 at Trademybit
[16:02:42] Network diff set to 660
[16:02:42] Stratum from Trademybit detected new block
[16:02:51] Accepted 333e23f5 Diff 0.020/0.005 GPU 0 at Trademybit

x13mod with some my optimizations only in OpenCL code, not miner code

Code:

sgminer  - Started: [2014-06-04 15:58:48] - [0 days 00:01:46]
--------------------------------------------------------------------------------
(5s):2.874M (avg):2.865Mh/s | A:15  R:0  HW:0  WU:0.053/m
ST: 1  SS: 0  NB: 2  LW: 167  GF: 0  RF: 0
Connected to Trademybit (stratum) diff 0.020 as user someone.5
Block: 51133e8a...  Diff:232  Started: [15:59:04]  Best share: 0.688
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  68.0C 1139RPM | 2.881M/2.953Mh/s | A:16 R:  0.0% HW:0 WU:0.053/m rI:81920
--------------------------------------------------------------------------------
[15:59:22] Accepted 11b8fbbc Diff 0.056/0.005 GPU 0 at Trademybit
[15:59:27] Accepted aa5c5a44 Diff 0.006/0.005 GPU 0 at Trademybit
[15:59:28] Accepted 7a40f6a0 Diff 0.008/0.005 GPU 0 at Trademybit
[15:59:31] Accepted 3135dc6d Diff 0.020/0.005 GPU 0 at Trademybit
[15:59:35] Accepted 904f73a9 Diff 0.007/0.005 GPU 0 at Trademybit
[15:59:39] Accepted 39fabeaf Diff 0.017/0.005 GPU 0 at Trademybit

i know this is optimization lol, i was just showing the obvious

is that a 280x at 1100c doing almost 2.9MH/s on x13?

virtualista

newbie

Activity: 22

Merit: 0

Quote from: cent on June 04, 2014, 05:44:53 AM

Quote from: dragonmike

LoL @ gpu-powertune @ 40! Cheesy

I run my watercooled DC2T 3GD5 with similar settings but with 1200/1500 clocks. Get 2.75Mh/s. No powertune set in config file. I'll just try that for lulz. 'cause without it SGminer starts going nuts after a few hours above 1200 gpu clock. I noticed running 1800 mem clock brought nothing.

Cent, how long do those settings work before SGminer crashes?

crashes...crashes...Only kids going collapse (like you)

bios is modded, powertune unlocked, voltage unlocked....all fine....no crashes (1250/1800/1.256v)

what about power consumption?

lasybear

member

Activity: 113

Merit: 14

Quote from: Amph on June 04, 2014, 06:43:26 AM

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

100kh/s more on what? x11 and x13? both?

Quote from: lasybear on June 04, 2014, 05:34:01 AM

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

and 1% fee.

the math is still in his favor

100kh/s more is like 1/30 for 1/100 fee

You're so funny )
This is not a miner quality, but kernels code optimisations.
Ok. Look.
Girino's

Code:

sgminer  - Started: [2014-06-04 16:02:10] - [0 days 00:01:34]
--------------------------------------------------------------------------------
(5s):2.876M (avg):2.854Mh/s | A:17  R:1  HW:0  WU:0.052/m
ST: 0  SS: 0  NB: 9  LW: 165  GF: 0  RF: 0
Connected to Trademybit (stratum) diff 0.005 as user someone.5
Block: 1ecd4b32...  Diff:34  Started: [16:03:42]  Best share: 0.313
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  64.0C 1049RPM | 2.866M/2.902Mh/s | A:18 R:  5.3% HW:0 WU:0.052/m rI:81920
--------------------------------------------------------------------------------
[16:02:28] Accepted 71450cce Diff 0.009/0.005 GPU 0 at Trademybit
[16:02:34] Accepted 1ef085e5 Diff 0.032/0.005 GPU 0 at Trademybit
[16:02:40] Accepted 71108ca2 Diff 0.009/0.005 GPU 0 at Trademybit
[16:02:42] Network diff set to 660
[16:02:42] Stratum from Trademybit detected new block
[16:02:51] Accepted 333e23f5 Diff 0.020/0.005 GPU 0 at Trademybit

x13mod with some my optimizations only in OpenCL code, not miner code

Code:

sgminer  - Started: [2014-06-04 15:58:48] - [0 days 00:01:46]
--------------------------------------------------------------------------------
(5s):2.874M (avg):2.865Mh/s | A:15  R:0  HW:0  WU:0.053/m
ST: 1  SS: 0  NB: 2  LW: 167  GF: 0  RF: 0
Connected to Trademybit (stratum) diff 0.020 as user someone.5
Block: 51133e8a...  Diff:232  Started: [15:59:04]  Best share: 0.688
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:  68.0C 1139RPM | 2.881M/2.953Mh/s | A:16 R:  0.0% HW:0 WU:0.053/m rI:81920
--------------------------------------------------------------------------------
[15:59:22] Accepted 11b8fbbc Diff 0.056/0.005 GPU 0 at Trademybit
[15:59:27] Accepted aa5c5a44 Diff 0.006/0.005 GPU 0 at Trademybit
[15:59:28] Accepted 7a40f6a0 Diff 0.008/0.005 GPU 0 at Trademybit
[15:59:31] Accepted 3135dc6d Diff 0.020/0.005 GPU 0 at Trademybit
[15:59:35] Accepted 904f73a9 Diff 0.007/0.005 GPU 0 at Trademybit
[15:59:39] Accepted 39fabeaf Diff 0.017/0.005 GPU 0 at Trademybit

bullus

sr. member

Activity: 294

Merit: 250

How to make the trademybit switcher work in windows?
https://github.com/0uranos/trademybit-switcher/tree/x11

I change the x11bat and insert my api key and uncomment x11.
How to startup the .py file in windows8.1?

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

100kh/s more on what? x11 and x13? both?

Quote from: lasybear on June 04, 2014, 05:34:01 AM

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

and 1% fee.

the math is still in his favor

100kh/s more is like 1/30 for 1/100 fee

strombert

full member

Activity: 125

Merit: 100

HI there,

I wonder if I can mine at cryptoalts with my antminer U2 Sticks to get paid in Xcs? ?
I'm on windows in europe, would anyone be so nice to help me assist with the command line and which miner I do have to use? would be great. Thank you

dragonmike

hero member

Activity: 1274

Merit: 556

Quote

crashes...crashes...Only kids going collapse (like you)

bios is modded, powertune unlocked, voltage unlocked....all fine....no crashes (1250/1800/1.256v)

So you get 250Kh/s for how much more watt there, kid?

Mister1k

hero member

Activity: 896

Merit: 520

Quote from: Bojcha on June 02, 2014, 06:45:20 AM

where did you find that 120 and 60 number?
Posted from Bitcointa.lk - #nqWzb4qug4G9ATyT

See post 1058.

cent

newbie

Activity: 34

Merit: 0

Quote from: dragonmike

LoL @ gpu-powertune @ 40! Cheesy

I run my watercooled DC2T 3GD5 with similar settings but with 1200/1500 clocks. Get 2.75Mh/s. No powertune set in config file. I'll just try that for lulz. 'cause without it SGminer starts going nuts after a few hours above 1200 gpu clock. I noticed running 1800 mem clock brought nothing.

Cent, how long do those settings work before SGminer crashes?

crashes...crashes...Only kids going collapse (like you)

bios is modded, powertune unlocked, voltage unlocked....all fine....no crashes (1250/1800/1.256v)

Mister1k

hero member

Activity: 896

Merit: 520

Quote from: topnetdeal on June 02, 2014, 06:50:10 AM

Quote from: Mister1k on June 02, 2014, 05:35:40 AM

X11 hd 7950 x3. Ive been playing with xintensity.
I am also using cgwatcher. That way you can see shares per second against the work utility.
For me. 1792 shaders * X= 1792x120=215,040 threads.
I incrementally go up and watch shares and WU.
My hash changes 10-30khs but is deceiving. Hash goes down a bit but shares rise.
Cgwatcher you can see shares in real time.
I am running 2 threads per gpu. Work 256.
X=120 so that is X60 per thread.
1100 on the clocks 1500 memory.
3x hd7950 = 8.9 mh/s
2.96 mh per card .
My pool sees 9.25-10 mh/s
WU is .120+
.040 per card
According to this chart.
I:13 = 8192 threads
I:14 = 16384 threads
I:15 = 32768 threads
I:16 = 65536 threads
I:17 = 131072 threads
I:18 = 262144 threads
I:19 = 524288 threads
I:20 = 1048576 threads

1792x120=215040 or about I 17.75ish.
Will test more. Have a great day.

Hi, xintensity is max 9999, I think You was working with rawintensity (max 2147483647).

Maybe , i'm missin something.
Wink

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: lasybear on June 04, 2014, 05:34:01 AM

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

and 1% fee.

yes but still better

lasybear

member

Activity: 113

Merit: 14

Quote from: ozzy1926 on June 04, 2014, 05:22:44 AM

will there be new % increase? girino version gives 100kh/s more

and 1% fee.

ozzy1926

sr. member

Activity: 378

Merit: 250

will there be new % increase? girino version gives 100kh/s more

dragonmike

hero member

Activity: 1274

Merit: 556

LoL @ gpu-powertune @ 40! Cheesy

I run my watercooled DC2T 3GD5 with similar settings but with 1200/1500 clocks. Get 2.75Mh/s. No powertune set in config file. I'll just try that for lulz. 'cause without it SGminer starts going nuts after a few hours above 1200 gpu clock. I noticed running 1800 mem clock brought nothing.

Cent, how long do those settings work before SGminer crashes?

cent

newbie

Activity: 34

Merit: 0

virtualista

Quote

May we have your settings here?

ASUS HD7970 DC2 3GD5 (water cooling / 1250 / 1800 / 1.256v)
win8.1x64
catalyst 14.4
sgminer_x11x13mod_03_06_2014
{
"pools" : [
   {
      "url" : "xxxxx",
      "user" : "xxxxx",
      "pass" : "xxxxx"
   }
]
,
"intensity" : "18",
"vector" : "1",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"shaders" : "0",
"lookup-gap" : "2",
"gpu-threads" : "2",
"gpu-engine" : "1250",
"gpu-fan" : "0-10",
"gpu-memclock" : "1800",
"gpu-memdiff" : "0",
"gpu-powertune" : "40",
"gpu-vddc" : "0.000",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"shares" : "0",
"no-pool-disable" : true,
"no-submit-stale" : true
}

virtualista

newbie

Activity: 22

Merit: 0

Quote from: cent on June 04, 2014, 03:34:50 AM

HD 7970 x13 algo
http://i.pixs.ru/storage/1/9/2/2014060415_3777894_12406192.jpg

May we have your settings here?

valipopa

newbie

Activity: 7

Merit: 0

Quote from: valipopa on June 03, 2014, 02:32:12 PM

Hello,

Can someone please help me with some settings for my 290 cards?

I have one 290 and one 290x cards.
290 is getting 2,2 Mhs and 290x 2,7 Mhs on X13. From what i have read that is quite low.
I'm running Ubuntu with 14.3 AMD drivers.
mining software: https://github.com/lasybear/sph-sgminer_x11mod

these are my settings:

"no-client-reconnect" : false,
"queue" : "0",
"powertune" : "50",
"scan-time" : "1",
"expiry" : "1",
"failover-only" : true,
"kernel" : "x13mod",
"kernel-path" : "/usr/local/bin",
"no-submit-stale" : true,
"gpu-threads" : "4",
"gpu-engine" : "1041,1080",
"gpu-memclock" : "1500,1500",
"intensity" : "0",
"xintensity" : "64",
"temp-hysteresis" : "3",
"temp-target" : "70",
"temp-overheat" : "87",
"temp-cutoff" : "90",
"auto-fan" : true,
"worksize" : "256",
"gpu-fan" : "30-100",
"lookup-gap" : "2",
"thread-concurrency" : "28456,24577"

Thank you!

anyone?

oktay50000

sr. member

Activity: 560

Merit: 250

any x11/13 mod on multialgorithm sgminer???

virtualista

newbie

Activity: 22

Merit: 0

Quote from: ramx2 on June 03, 2014, 11:59:07 PM

Quote from: virtualista on June 03, 2014, 10:38:02 AM

Quote from: ramx2 on June 03, 2014, 09:21:04 AM

Quote from: virtualista on June 03, 2014, 05:24:24 AM

Quote from: ramx2 on June 03, 2014, 04:31:15 AM

Tried that :S My Vga is old but I use it for Scrypt... I dont know why the new miner isn't initializing the GPU :S

./sgminer -T
let me see the first lines!

C:\Users\xx\sgminer_x11x13mod_03_06_2014>sgminer -T
[16:19:59] Started sgminer 4.1.0
[16:19:59] Loaded configuration file sgminer.conf
[16:19:59] Kernel x11mod is experimental.
[16:20:01] Error -11: Building Program (clBuildProgram)
[16:20:01] "C:\Users\xx\AppData\Local\Temp\OCL42C4.tmp.cl", line 7711: error: f
unction
   "get_global_offset" declared implicitly
   __global hash_t *hash = &(hashes[gid-get_global_offset(0)]);
   ^

"C:\Users\xx\A
[16:20:01] Failed to init GPU thread 0, disabling device 0
[16:20:01] Restarting the GPU from the menu will not fix this.

[16:20:01] Try restarting sgminer.
[16:20:01] Probing for an alive pool
[16:20:01] Pool 3 difficulty changed to 0.003
[16:20:01] Pool 4 difficulty changed to 0.003
[16:20:02] Pool 0 difficulty changed to 0.003
[16:20:02] Pool 1 difficulty changed to 0.003
[16:20:02] Switching to Pool 3 - first alive pool
[16:20:02] Pool 2 difficulty changed to 0.003
[16:20:02] Pool 0 alive, testing stability
[16:20:02] Switching to Pool 0
[16:20:02] Network diff set to 89

C:\Users\xx\sgminer_x11x13mod_03_06_2014>

What i linked is not for windows, its for linux.

forget windows.

Lasybear just confirmed that my vga won't work due to the lack of the Opencl 1.1 get_global_offset function. My vga has Opencl 1.0

Thank you for trying to help me out

Ohhhh!

cent

newbie

Activity: 34

Merit: 0

HD 7970 x13 algo

Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 31. (Read 351531 times)