Pages:
Author

Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 26. (Read 351545 times)

hero member
Activity: 935
Merit: 1001
I don't always drink...
Sapphire HD 7970's x 4:  gets 2.4MH/s, at engine speed 1050, mem 1500, undervolted to 1.12

\
Code:
,
"intensity" : "19,19,19,19",
"vector" : "1,1,1,1",
"worksize" : "128,128,128,128",
"kernel" : "x13mod,x13mod,x13mod,x13mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8192,8192,8192,8192",
"failover-only" : true,
"gpu-engine" : "1050,1050,1050,1050",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-reorder" : true,
"temp-cutoff" : "90,90,90,90",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : false,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"temp-hysteresis" : "3",
"tcp-keepalive" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
member
Activity: 350
Merit: 10
Can some1 share settings for X11 and X13 mining? I got 2 x R9 280X and i get a lot of rejects(1-10%). Mining on TradeMyBit pool. Cards aren't undervolted and my AMD drivers are 14.4. My settings are as follow:

Code:
"intensity" : "15,15",
"vectors" : "1,1",
"worksize" : "256,256",
"kernel" : "x13mod",
"lookup-gap" : "2,2",
"thread-concurrency" : "8192,8192",
"shaders" : "2048,2048",
"gpu-engine" : "1050,1100",
"gpu-fan" : "auto,auto",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "20,20",
"gpu-vddc" : "0.000,0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "87,87",
"temp-target" : "80,80",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"auto-fan" : true,
"auto-gpu" : true,
"kernel-path" : "/usr/local/bin"
}

One card is Sapphire Dual-X and the other is Asus DirectCUIITOP edition. My hashrate for X13 is as follow - 2.36Mhs for Sapphire and 2.46Mhs for Asus.

I posted earlier with my settings on sapphire r9-280xthat are still to this day stable. Pretty close to urs except i use Intensity 18, GPU engine 1160, worksize 128
newbie
Activity: 26
Merit: 0
Can some1 share settings for X11 and X13 mining? I got 2 x R9 280X and i get a lot of rejects(1-10%). Mining on TradeMyBit pool. Cards aren't undervolted and my AMD drivers are 14.4. My settings are as follow:

Code:
"intensity" : "15,15",
"vectors" : "1,1",
"worksize" : "256,256",
"kernel" : "x13mod",
"lookup-gap" : "2,2",
"thread-concurrency" : "8192,8192",
"shaders" : "2048,2048",
"gpu-engine" : "1050,1100",
"gpu-fan" : "auto,auto",
"gpu-memclock" : "1500,1500",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "20,20",
"gpu-vddc" : "0.000,0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "87,87",
"temp-target" : "80,80",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"auto-fan" : true,
"auto-gpu" : true,
"kernel-path" : "/usr/local/bin"
}

One card is Sapphire Dual-X and the other is Asus DirectCUIITOP edition. My hashrate for X13 is as follow - 2.36Mhs for Sapphire and 2.46Mhs for Asus.
sr. member
Activity: 416
Merit: 250
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.bin
Catalyst 14.1
maybe you`ll share with something else for x13 algo?  Roll Eyes
PS As for me you have the best *.bin-file for x11 algo - 3,5mhs 7970@1100/1250 it`s cool  Cool
It's bin compiled at 280x - 3.5 Mhs @1190/1500  Wink  by sasybear's x11-mod.
please test x13  - 2.8 Mhs  https://www.dropbox.com/s/x5tk4cip0lgb0lj/x13modTahitiglg2tc8192w128l4.bin
legendary
Activity: 2026
Merit: 1005
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.bin
Catalyst 14.1
maybe you`ll share with something else for x13 algo?  Roll Eyes
PS As for me you have the best *.bin-file for x11 algo - 3,5mhs 7970@1100/1250 it`s cool  Cool
member
Activity: 107
Merit: 10
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.bin
Catalyst 14.1
Thanks, seems to be working nicely.
sr. member
Activity: 416
Merit: 250
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.bin
Catalyst 14.1
member
Activity: 107
Merit: 10
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
sr. member
Activity: 490
Merit: 250
Guys,

Why i am not getting any accepted share in X13 ?
Card(s), miner version, config, pool ?

Cards: R9 280, 2x 7950
miner: sgminer_x11mod
config: pure simple -w 128 -I 17
pool: trademybit x13 multipool

PS: Solved. updated catalyst to 14.4 and then compiled latest version of this miner and rebuild it from git myself. now it's working.
member
Activity: 61
Merit: 10
Guys,

Why i am not getting any accepted share in X13 ?
Card(s), miner version, config, pool ?
member
Activity: 88
Merit: 10
Guys please tell me how to lower RPM fan speed on GPU 0
sound like crazy, but GPU 1 is good

here is my config

Quote
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 18 --worksize 256 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85



--temp-target 75 or 80 would lower your fan RPM for both GPUs
sr. member
Activity: 490
Merit: 250
Guys,

Why i am not getting any accepted share in X13 ?
sr. member
Activity: 294
Merit: 250
Ok, let me know if it is stable, I'll test it on my own cards.
Just in case, I test to run @1050Mhz but with intensity 17, I'm @1890kh/s per card ... let's see how many time it run Cheesy

Good luck  Cheesy
I monitor it with cgmonitor and teamviewer
http://cgminermonitor.com/Shared/e59f74c95f644b48aee333146201af870
hero member
Activity: 698
Merit: 500

    • Fix x13mod for AMD HD 5xxx/6xxx cards. Use for these cards "kernel" : "x13modold" in config file or -k x13modold from the command line. All parameters (intensity, threads etc) need to be tuned individually.
    Windows binaries (actual):
    https://www.dropbox.com/s/sodbzky1e3p2d32/sgminer_x11x13mod_03_06_2014.zip

    I don't get gpu temps fan control and management under "[G]PU" with hd5870, drivers 14.1
    hero member
    Activity: 789
    Merit: 501
    Ok, let me know if it is stable, I'll test it on my own cards.
    Just in case, I test to run @1050Mhz but with intensity 17, I'm @1890kh/s per card ... let's see how many time it run Cheesy
    sr. member
    Activity: 294
    Merit: 250
    Yes, I gave it more volts now and see how it runs in the longtime..it always happen after 12hours or so, now it was dead or sometimes it just reboot my rig for some reason. I'm using the latest sgminer from 3-6-2014
    hero member
    Activity: 789
    Merit: 501
    I was able to run my 7950 faster, something like 2Mh/s in X13. But not stable.
    With my settings (intensity only 17 and lower OC @ 1025 ... It steady @1845kh/s and don't SICK or DEAD)
    Try to set you carshing card @ 17 instead of 19 intensity ? Or give some extra volt in it ?
    sr. member
    Activity: 294
    Merit: 250
    After 3 days of tweaking, I finally have config that run stable on X13 for my 7950.
    4 card hashing @1845Mh/s for 18h without any crash.
    (The cards are not stable with too hign OC, I was able to run them @1100 core on Scrypt and @1050 on darkcoin ... but X13 is 1025Mh/z max for me if I don't want sick or dead card after somes hours)

    Sapphire Dual-X OC 3Go 1025/1250 lightly undervolted @1.125v instead of 1.256v stock

    If it help, this is the config

    "kernel" : "x13mod",
    "api-listen" : true,
    "intensity" : "17",
    "vectors" : "1",
    "worksize" : "256",
    "temp-cutoff" : "85",
    "temp-overheat" : "75",
    "temp-target" : "71",
    "auto-fan" : true,
    "gpu-fan" : "0-85",
    "expiry" : "30",
    "gpu-dyninterval" : "7",
    "log" : "5",
    "retry-pause" : "5",
    "scan-time" : "30",
    "queue" : "5",
    "temp-hysteresis" : "3",
    "shares" : "0",
    "shaders" : "1792",
    "thread-concurrency" : "8192",
    "gpu-thread" : "2",
    "gpu-engine" : "1025",
    "sharethreads" : "32",
    "lookup-gap" : "2",
    "gpu-powertune" : "20",
    "gpu-memclock" : "1250",
    "gpu-vddc" : "1.125",
    "failover-only" : true

    It seems low my settings with the 7950@1070/1500@1100mV hashing @2300kh/s

    Code:
    "kernel" : "x13mod,x13modold,x13mod,x13mod,x13mod",
    "api-allow" : "W:127.0.0.1",
    "api-listen" : true,
    "api-mcast-port" : "4028",
    "api-port" : "4028",
    "expiry" : "10",
    "failover-only" : true,
    "kernel-path" : "/usr/local/bin",
    "log" : "5",
    "queue" : "1",
    "scan-time" : "7",
    "shares" : "0",
    "failover-switch-delay" : "10",
    "gpu-threads" : "2,4,2,2,2",
    "gpu-dyninterval" : "7",
    "gpu-engine" : "0",
    "gpu-fan" : "65",
    "gpu-platform" : "0",
    "gpu-memclock" : "0",
    "gpu-memdiff" : "0",
    "gpu-powertune" : "8",
    "gpu-vddc" : "0",
    "intensity" : "19,18,19,19,19",
    "temp-target" : "75",
    "temp-overheat" : "85",
    "temp-cutoff" : "95",
    "temp-hysteresis" : "3",
    "vectors" : "1",
    "worksize" : "256,64,256,256,256",
    "lookup-gap" : "0",
    "shaders" : "1792,1536,1792,1792,1792",
    "thread-concurrency" : "8192,8000,8192,8192,8192",
    "no-pool-disable" : true,
    "device" : "0,1,2,3,4"
    second setting is for my 6970

    Code:
    sgminer 4.1.0 - Started: [2014-06-05 18:01:24] - [0 days 06:39:08]
    --------------------------------------------------------------------------------
    (5s):10.54M (avg):10.49Mh/s | A:1701  R:34  HW:0  WU:0.148/m
    ST: 1  SS: 0  NB: 695  LW: 61250  GF: 0  RF: 0
    Connected to miningrentalrigs x13 (stratum) diff 0.041 as user xxxxxx
    Block: 1fd4f716...  Diff:1.81K  Started: [00:40:17]  Best share: 114
    --------------------------------------------------------------------------------
    [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
     GPU  0:  57.0C 2730RPM | 2.306M/2.303Mh/s | A:404 R:  1.6% HW:0 WU:0.032/m I:19
     GPU  1:  44.0C  65%    | 1.444M/1.445Mh/s | A:193 R:  1.3% HW:0 WU:0.018/m I:18
     GPU  2:  61.0C 2806RPM | 2.294M/2.295Mh/s | A:377 R:  1.9% HW:0 WU:0.034/m I:19
     GPU  3:  56.0C 3068RPM | 2.296M/2.302Mh/s | A:368 R:  1.4% HW:0 WU:0.032/m I:19
     GPU  4:  56.0C 2683RPM | 2.293M/2.302Mh/s | A:359 R:  1.2% HW:0 WU:0.032/m I:19
    --------------------------------------------------------------------------------
    [00:35:17] Accepted 059f93b4 Diff 0.178/0.084 GPU 2 at miningrentalrigs x13
    [00:36:09] Network diff set to 1.92K
    [00:36:09] Stratum from miningrentalrigs x13 detected new block
    [00:38:14] Accepted d642df5e Diff 1.195/0.084 GPU 2 at miningrentalrigs x13


    Sad
    Everytime I got the same gpu who is dead after some period of time..showing no hw error until it is dead

    Code:
    sgminer 4.1.0 - Started: [2014-06-05 18:01:24] - [0 days 15:00:09]
    --------------------------------------------------------------------------------
    (5s):7.929M (avg):9.736Mh/s | A:3803  R:146  HW:132  WU:0.136/m
    ST: 1  SS: 0  NB: 1955  LW: 140716  GF: 12  RF: 0
    Connected to miningrentalrigs x13 (stratum) diff 0.029 as user xxxxx
    Block: 22e7ccd2...  Diff:1.44K  Started: [09:00:32]  Best share: 529
    --------------------------------------------------------------------------------
    [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
     GPU  0:  54.0C 2705RPM | 2.303M/2.300Mh/s | A:930 R:  3.2% HW:  0 WU:0.032/m I:19
     GPU  1:  40.0C  62%    | 1.274M/1.280Mh/s | A:517 R:  5.2% HW:  0 WU:0.018/m I:17
     GPU  2:  56.0C 2911RPM | DEAD  /1.554Mh/s | A:573 R:  2.5% HW:132 WU:0.023/m I:19
     GPU  3:  51.0C 3008RPM | 2.295M/2.300Mh/s | A:877 R:  3.2% HW:  0 WU:0.032/m I:19
     GPU  4:  33.0C 2686RPM | 2.303M/2.300Mh/s | A:906 R:  3.9% HW:  0 WU:0.032/m I:19
    --------------------------------------------------------------------------------
    [08:57:16] Stratum from miningrentalrigs x13 detected new block
    [08:57:26] Accepted 066dbc80 Diff 0.156/0.029 GPU 3 at miningrentalrigs x13
    [08:57:36] Accepted 1ad307a4 Diff 0.037/0.029 GPU 1 at miningrentalrigs x13
    [08:58:01] Accepted 0ba1fa0c Diff 0.086/0.029 GPU 4 at miningrentalrigs x13
    [08:58:16] Accepted 12f7e94a Diff 0.053/0.029 GPU 3 at miningrentalrigs x13
    [08:58:25] Accepted 13ef29c6 Diff 0.050/0.029 GPU 0 at miningrentalrigs x13
    [08:58:26] Network diff set to 1.19K
    [08:58:26] Stratum from miningrentalrigs x13 detected new block
    [08:58:43] miningrentalrigs x13 stale share detected, submitting as user requested
    [08:58:43] Accepted 10e91965 Diff 0.059/0.029 GPU 3 at miningrentalrigs x13
    [08:58:53] Network diff set to 1.26K
    [08:58:53] Stratum from miningrentalrigs x13 detected new block
    [08:59:10] Accepted 06b2e6a3 Diff 0.149/0.029 GPU 3 at miningrentalrigs x13
    [08:59:11] Accepted 09f4a2f7 Diff 0.100/0.029 GPU 4 at miningrentalrigs x13
    [08:59:22] Network diff set to 1.3K
    [08:59:22] Stratum from miningrentalrigs x13 detected new block
    [08:59:34] Network diff set to 1.35K
    [08:59:34] Stratum from miningrentalrigs x13 detected new block
    [08:59:49] Accepted 07e070c8 Diff 0.127/0.029 GPU 4 at miningrentalrigs x13
    [09:00:29] Network diff set to 1.41K
    [09:00:29] Stratum from miningrentalrigs x13 detected new block
    [09:00:32] Network diff set to 1.44K
    [09:00:32] Stratum from miningrentalrigs x13 detected new block
    [09:00:44] Accepted 0e04e3dc Diff 0.071/0.029 GPU 1 at miningrentalrigs x13
    [09:01:17] Accepted 147ab2c0 Diff 0.049/0.029 GPU 4 at miningrentalrigs x13[code]

    Some setting not right??
    [/code]
    sr. member
    Activity: 416
    Merit: 250
    Anyone know why this crashes on BAMT 1.6 every 20 minutes or so? Here are my settings for R9 270 cards:

    "intensity" : "14",
    "kernel" : "x11mod",
    "lookup-gap" : "2",
    "thread-concurrency" : "8192",
    "shaders" : "0",
    "vectors" : "1",

    "gpu-engine" : "1050",
    "gpu-fan" : "50-100",
    "gpu-memclock" : "1440",
    "gpu-powertune" : "20",

    "temp-cutoff" : "95",
    "temp-overheat" : "85",
    "temp-target" : "75",

    "api-listen": true,
    "api-port": "4028",
    "api-allow": "W:127.0.0.1",

    "auto-fan" : true,
    "auto-gpu" : true,
    "expiry" : "120",
    "failover-only" : true,
    "gpu-threads" : "2",
    "log" : "5",
    "queue" : "1",
    "scan-time" : "60",
    "temp-hysteresis" : "3",

    "failover-switch-delay" : "60",
    "no-pool-disable" : true,
    "kernel-path" : "/usr/local/bin"

    try "expiry" : "60",


    Where are you guys getting this file from x13modold? note  is not x13mod is: x13modold i tried to run it but it wont let sgminer even star up???

    update files from folder "kernel" and sgminer.exe  https://www.dropbox.com/s/lrcpu7bnxqhvd5f/sph-sgminer_x11mod.zip
    x13modold  it's not a file, it's name of kernel
    sr. member
    Activity: 411
    Merit: 250
    for 290 what maximum "gpu-engine": "1200", exposed? thanks.

    whether supports sph-sgminer hot switching between algorithms, that is whether it is possible in the program to set up directly х11 and х13?
    Pages:
    Jump to: