[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 27.

jenveno

member

Activity: 350

Merit: 10

Quote from: jbass350z on June 05, 2014, 05:47:08 PM

Anyone know why this crashes on BAMT 1.6 every 20 minutes or so? Here are my settings for R9 270 cards:

"intensity" : "14",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"vectors" : "1",

"gpu-engine" : "1050",
"gpu-fan" : "50-100",
"gpu-memclock" : "1440",
"gpu-powertune" : "20",

"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",

"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"failover-switch-delay" : "60",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"

Change Shaders to 1280. Change Intensity to 18. Try again and let us know what happens.

HardwarePal

hero member

Activity: 565

Merit: 500

Best I could get

14.4 Drivers

R9-290s (NON X)

X11 - 4mh/s
x13 - 2.9mh/s

-I 20 -g 5 -w 128 --thread-concurrency 32765 --gpu-engine 1007 --gpu-memclock 1250 --auto-fan --temp-target 84 --temp-overheat 87 --temp-cutoff 93 --gpu-fan 70-85

bullus

sr. member

Activity: 294

Merit: 250

Quote from: th00ber on June 05, 2014, 05:59:27 PM

After 3 days of tweaking, I finally have config that run stable on X13 for my 7950.
4 card hashing @1845Mh/s for 18h without any crash.
(The cards are not stable with too hign OC, I was able to run them @1100 core on Scrypt and @1050 on darkcoin ... but X13 is 1025Mh/z max for me if I don't want sick or dead card after somes hours)

Sapphire Dual-X OC 3Go 1025/1250 lightly undervolted @1.125v instead of 1.256v stock

If it help, this is the config

"kernel" : "x13mod",
"api-listen" : true,
"intensity" : "17",
"vectors" : "1",
"worksize" : "256",
"temp-cutoff" : "85",
"temp-overheat" : "75",
"temp-target" : "71",
"auto-fan" : true,
"gpu-fan" : "0-85",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "5",
"retry-pause" : "5",
"scan-time" : "30",
"queue" : "5",
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "1792",
"thread-concurrency" : "8192",
"gpu-thread" : "2",
"gpu-engine" : "1025",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-powertune" : "20",
"gpu-memclock" : "1250",
"gpu-vddc" : "1.125",
"failover-only" : true

It seems low my settings with the 7950@1070/1500@1100mV hashing @2300kh/s

Code:

"kernel" : "x13mod,x13modold,x13mod,x13mod,x13mod",
"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "10",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"log" : "5",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"failover-switch-delay" : "10",
"gpu-threads" : "2,4,2,2,2",
"gpu-dyninterval" : "7",
"gpu-engine" : "0",
"gpu-fan" : "65",
"gpu-platform" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "8",
"gpu-vddc" : "0",
"intensity" : "19,18,19,19,19",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256,64,256,256,256",
"lookup-gap" : "0",
"shaders" : "1792,1536,1792,1792,1792",
"thread-concurrency" : "8192,8000,8192,8192,8192",
"no-pool-disable" : true,
"device" : "0,1,2,3,4"

second setting is for my 6970

Code:

sgminer 4.1.0 - Started: [2014-06-05 18:01:24] - [0 days 06:39:08]
--------------------------------------------------------------------------------
(5s):10.54M (avg):10.49Mh/s | A:1701  R:34  HW:0  WU:0.148/m
ST: 1  SS: 0  NB: 695  LW: 61250  GF: 0  RF: 0
Connected to miningrentalrigs x13 (stratum) diff 0.041 as user xxxxxx
Block: 1fd4f716...  Diff:1.81K  Started: [00:40:17]  Best share: 114
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU  0:  57.0C 2730RPM | 2.306M/2.303Mh/s | A:404 R:  1.6% HW:0 WU:0.032/m I:19
 GPU  1:  44.0C  65%    | 1.444M/1.445Mh/s | A:193 R:  1.3% HW:0 WU:0.018/m I:18
 GPU  2:  61.0C 2806RPM | 2.294M/2.295Mh/s | A:377 R:  1.9% HW:0 WU:0.034/m I:19
 GPU  3:  56.0C 3068RPM | 2.296M/2.302Mh/s | A:368 R:  1.4% HW:0 WU:0.032/m I:19
 GPU  4:  56.0C 2683RPM | 2.293M/2.302Mh/s | A:359 R:  1.2% HW:0 WU:0.032/m I:19
--------------------------------------------------------------------------------
[00:35:17] Accepted 059f93b4 Diff 0.178/0.084 GPU 2 at miningrentalrigs x13
[00:36:09] Network diff set to 1.92K
[00:36:09] Stratum from miningrentalrigs x13 detected new block
[00:38:14] Accepted d642df5e Diff 1.195/0.084 GPU 2 at miningrentalrigs x13

oly1

newbie

Activity: 56

Merit: 0

Hi I have a rig with 4x 7850 GPU. When i run sgminer (x13mod) the fans of the cards randomly goes from normal to 100% for a second and back to normal speed. What causes this or this is a bug? Any ideas how to solve this?

that's my bat file:

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\miner\x13mod\sgminer.exe -k x13mod -o stratum+tcp://amsterdam.eu.stratum.dedicatedpool.com:7003 -u xxxx -p xxxx --intensity 17 --worksize 128 -g 1 --gpu-engine 1100,1100,1100,1100 --gpu-memclock 1250 --thread-concurrency 8192 --auto-fan --gpu-fan 5-70,5-70,5-70,5-70 --temp-target 70 --temp-overheat 85 --temp-cutoff 90 --gpu-powertune 20

lobo13hf

hero member

Activity: 2268

Merit: 507

Where are you guys getting this file from x13modold? note is not x13mod is: x13modold i tried to run it but it wont let sgminer even star up???

th00ber

hero member

Activity: 789

Merit: 501

After 3 days of tweaking, I finally have config that run stable on X13 for my 7950.
4 card hashing @1845Mh/s for 18h without any crash.
(The cards are not stable with too hign OC, I was able to run them @1100 core on Scrypt and @1050 on darkcoin ... but X13 is 1025Mh/z max for me if I don't want sick or dead card after somes hours)

Sapphire Dual-X OC 3Go 1025/1250 lightly undervolted @1.125v instead of 1.256v stock

If it help, this is the config

"kernel" : "x13mod",
"api-listen" : true,
"intensity" : "17",
"vectors" : "1",
"worksize" : "256",
"temp-cutoff" : "85",
"temp-overheat" : "75",
"temp-target" : "71",
"auto-fan" : true,
"gpu-fan" : "0-85",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "5",
"retry-pause" : "5",
"scan-time" : "30",
"queue" : "5",
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "1792",
"thread-concurrency" : "8192",
"gpu-thread" : "2",
"gpu-engine" : "1025",
"sharethreads" : "32",
"lookup-gap" : "2",
"gpu-powertune" : "20",
"gpu-memclock" : "1250",
"gpu-vddc" : "1.125",
"failover-only" : true

jbass350z

newbie

Activity: 24

Merit: 0

Anyone know why this crashes on BAMT 1.6 every 20 minutes or so? Here are my settings for R9 270 cards:

"intensity" : "14",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"vectors" : "1",

"gpu-engine" : "1050",
"gpu-fan" : "50-100",
"gpu-memclock" : "1440",
"gpu-powertune" : "20",

"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",

"auto-fan" : true,
"auto-gpu" : true,
"expiry" : "120",
"failover-only" : true,
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"scan-time" : "60",
"temp-hysteresis" : "3",

"failover-switch-delay" : "60",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"

CoinBuzz

sr. member

Activity: 490

Merit: 250

Guys,

Why i am not getting any accepted share in X13 Huh

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Anybody know why a 7870 performs better then a 270X ?

I get 1.7Mhash on a 7870 and 1.6Mhash on a 270X.

Versus scrypt it was 400Khash vs. 490Khash.

lolek12345

newbie

Activity: 30

Merit: 0

Quote from: Blago on June 05, 2014, 01:17:22 PM

Quote from: lolek12345 on June 05, 2014, 12:05:46 PM

Quote from: Blago on June 05, 2014, 09:26:17 AM

Quote from: lolek12345 on June 05, 2014, 08:53:11 AM

My 5850 can't mine x13 neither x11. Tryed both kernel and still no go.
With this "x13mod.cl = 31 KB" sgminer crashed Angry

and with this "x13mod.cl = 281 KB" is hasing but it gives me HW, with any settings I(12-19), WS(64-256), TC(5000-7200) Undecided

I even tryed with no settings.....
Any ideas?? I just can't figure it out? Huh

Which drivers/sdk you have? I had 12.6 and 2.8sdk than updated to 13.2 same shit, and 14.4 too is not working, it's like I didnt do anything...
Yes I am on Windows 7 - 64bit.

thanks

use kernel x13modold
it's fixed by lasybear https://github.com/lasybear/sph-sgminer_x11mod/commit/f27d74b5e6e5f12d1d0d7475cefa343b537e6cbb

My system Windows 7 - 64bit driver 14.1 and hd 5670 - it's work

ehh didnt see the link
Can someone compile it for Windows?
thanks

https://www.dropbox.com/s/lrcpu7bnxqhvd5f/sph-sgminer_x11mod.zip +config

5870 1,266 Mh/s
sgminer.exe --kernel x13modold -I 19 --gpu-threads 2 -w 64

JUPIII is working Cheesy

Thanks very much Wink

I will mine some hours for you Wink

Thanks again! Respect!

aikklond

legendary

Activity: 1148

Merit: 1000

on X13MOD A8 5600 onboard GPU gives only HW errors, is there some settings that can make it work?

yudhistira

full member

Activity: 347

Merit: 100

Quote from: Blago on June 05, 2014, 02:32:17 PM

Quote from: yudhistira on June 05, 2014, 02:21:41 PM

Guys please tell me how to lower RPM fan speed on GPU 0
sound like crazy, but GPU 1 is good

here is my config

Quote

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 18 --worksize 256 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85

sgminer --kernel x11mod,x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 18,18 --worksize 128,128 -g 2,2 --thread-concurrency 8190,8192 --gpu-engine 1113,1113 --gpu-memclock 1500,1500 --gpu-powertune 20,20 --temp-target 68,68 --auto-fan --gpu-fan 40-80,40-80 --temp-cutoff 90,90 --temp-overheat 85,85

Thanks, but it's not working, still same before
3500RPM is it safe for long time

Blago

sr. member

Activity: 416

Merit: 250

Quote from: yudhistira on June 05, 2014, 02:21:41 PM

Guys please tell me how to lower RPM fan speed on GPU 0
sound like crazy, but GPU 1 is good

here is my config

Quote

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 18 --worksize 256 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85

sgminer --kernel x11mod,x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 18,18 --worksize 128,128 -g 2,2 --thread-concurrency 8190,8192 --gpu-engine 1113,1113 --gpu-memclock 1500,1500 --gpu-powertune 20,20 --temp-target 68,68 --auto-fan --gpu-fan 40-80,40-80 --temp-cutoff 90,90 --temp-overheat 85,85

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

I am surprised you are allowed to mix and match the kernels

./sgminer -k x13mod,x13mod,x13mod,x13modold

actually works

excellent!

Anybody know any settings for R7 260X Huh

yudhistira

full member

Activity: 347

Merit: 100

Guys please tell me how to lower RPM fan speed on GPU 0
sound like crazy, but GPU 1 is good

here is my config

Quote

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 18 --worksize 256 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-80 --temp-cutoff 90 --temp-overheat 85

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Here are the instructions to compile

Quote

git clone https://github.com/lasybear/sph-sgminer_x11mod
cd ./sph-sgminer_x11mod
< Please insert AMD ADL files adl_defines.h adl_sdk.h adl_structures.h to folder ./sph-sgminer_x11mod/ADL_SDK.
They can be found at http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/ >
./autogen.sh
./configure
make

lasybear

member

Activity: 113

Merit: 14

Quote from: Eastwind on June 05, 2014, 11:48:50 AM

Quote from: sb0y1 on June 05, 2014, 11:16:25 AM

Anyone got a 7990 working?

Im running dual 7990 rigs and getting nothing but HW errors?

This is my bat. Anyone know whats causing the issue? Have tried various tc and intensities, and tried 13.12, 13.9. 14.4 and 14.6 drivers.

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\sgminer_x11x13mod_03_06_2014\sgminer.exe --kernel x13mod -o stratum+tcp://am01.eu.trademybit.com:5550 -u sb0y1.2 -p 1234 -w 256 --thread-concurrency 11200 -g 2 -I 13 --gpu-memclock 1500 --gpu-engine 1040 --gpu-fan 100

Try TC=8192, I=17, g=2 if there are too many HW, reduce the core frequency.

OMG...
Just for fun, did you try --thread-concurrency 100500?

lzp99168

newbie

Activity: 3

Merit: 0

Quote from: bullus on June 05, 2014, 03:50:58 AM

Quote from: lzp99168 on June 05, 2014, 02:52:15 AM

Hi, I now use is AMD 6990 graphics card, with the time of this ore dug X11 software completely normal, but dig X13 mine all show that HW error, hope to be able to solve this problem, thank you

U have to use kernel x13modold for hd5xxx/hd6000 cards

thank U very much~

lzp99168

newbie

Activity: 3

Merit: 0

why can't use " --load-balance false" this option ? As long as you use it will go wrong

Blago

sr. member

Activity: 416

Merit: 250

Quote from: lolek12345 on June 05, 2014, 12:05:46 PM

Quote from: Blago on June 05, 2014, 09:26:17 AM

Quote from: lolek12345 on June 05, 2014, 08:53:11 AM

My 5850 can't mine x13 neither x11. Tryed both kernel and still no go.
With this "x13mod.cl = 31 KB" sgminer crashed Angry

and with this "x13mod.cl = 281 KB" is hasing but it gives me HW, with any settings I(12-19), WS(64-256), TC(5000-7200) Undecided

I even tryed with no settings.....
Any ideas?? I just can't figure it out? Huh

Which drivers/sdk you have? I had 12.6 and 2.8sdk than updated to 13.2 same shit, and 14.4 too is not working, it's like I didnt do anything...
Yes I am on Windows 7 - 64bit.

thanks

use kernel x13modold
it's fixed by lasybear https://github.com/lasybear/sph-sgminer_x11mod/commit/f27d74b5e6e5f12d1d0d7475cefa343b537e6cbb

My system Windows 7 - 64bit driver 14.1 and hd 5670 - it's work

ehh didnt see the link
Can someone compile it for Windows?
thanks

https://www.dropbox.com/s/lrcpu7bnxqhvd5f/sph-sgminer_x11mod.zip +config

5870 1,266 Mh/s
sgminer.exe --kernel x13modold -I 19 --gpu-threads 2 -w 64

Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 27. (Read 351531 times)