Hi, I now use is AMD 6990 graphics card, with the time of this ore dug X11 software completely normal, but dig X13 mine all show that HW error, hope to be able to solve this problem, thank you
U have to use kernel x13modold for hd5xxx/hd6000 cards
Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 29. (Read 351531 times)
June 05, 2014, 03:50:58 AM
U have to use kernel x13modold for hd5xxx/hd6000 cards
June 05, 2014, 03:35:20 AM
the new version give me a stopped working error, if i launch it through a shortcut
was fine in the last one...
was fine in the last one...
so...can someone confirm this?
it's very annoying to be forced to make a bat for every shortcut
June 05, 2014, 02:52:15 AM
Hi, I now use is AMD 6990 graphics card, with the time of this ore dug X11 software completely normal, but dig X13 mine all show that HW error, hope to be able to solve this problem, thank you
June 05, 2014, 02:36:19 AM
I'm compare hashrate sgminer by lasybear (x13mod) https://github.com/lasybear/sph-sgminer_x11mod
and sgminer V5_0 (marucoin-mod) https://github.com/sgminer-dev/sgminer/tree/v5_0
at the same config, (except "algorithm" : "marucoin-mod")
all miners i compile 3 hrs ago.
lasybear's sgminer maximum perfomance @:
280x - gpu-threads = 4
7870 - gpu-threads = 4
7850 - gpu-threads = 2
TABLE:
lasybear
June 05, 2014, 02:31:33 AM
lasybear after staying in wrong fork, I moved to yours, which fixed x13 hashrate, but x11 hashrate dropped from 12mh to 6mh.
any suggestions? i was using crator fork with 6x r270 on smos June 05, 2014, 02:19:48 AM
Has the "x13modold" been integrated in the unified SGminer yet? Yes it has, see: https://github.com/sgminer-dev/sgminer/tree/v5_0/kernel It's called 'marucoin-modold.cl' June 05, 2014, 02:09:01 AM
2 days that I'm tweaking my 7950 for X13, I'm unable to have a stable settings
 Does anyone running a 7950 on X13mod can send me the setting ? June 05, 2014, 01:46:15 AM
how to run gpu miner (sgminer) and asicminer (usb antminer) in 1 computer
 June 05, 2014, 12:42:16 AM
x13modold get 1.05Mh/s on HD5850. care to share?It is not much different from previous. is there better settings? -I 16 -w 64 -g 1 not use .conf file. June 04, 2014, 09:44:44 PM
 Is not working right when I use the mod version of sgminer when I solo with remote rigs. Details here.I hope some guru can help me fix it.I'll donate 0.02 btc! Here are details https://bitcointalksearch.org/topic/m.7129703 Posted from Bitcointa.lk - #Gx4SW9Y3XGEzdAnq June 04, 2014, 08:36:20 PM
@ lasybear "vector" or "vectors" ? Anyway.. tried your settings and mine 280x works better with I=18 then rI=81920 - exactly same settings.. strange. Posted from Bitcointa.lk - #xlIIYDOU7T7gwJap xintensity 512 works the best for me. June 04, 2014, 08:04:57 PM
Has the "x13modold" been integrated in the unified SGminer yet?
June 04, 2014, 07:50:42 PM
with lower power consumption on X11 and X13 has anyone tried using just 1 PCIe power connector to a 280x?
June 04, 2014, 06:47:39 PM
On r9 280x on any settings above "gpu-engine" : "1120" I get crashes of the drivers - display drivers stopped working, etc... Anyone can post what drivers are you using and with what config, having more than 2.6 mh for a 280 running stable What voltage? I have 2xSapphire but one is with Hynix memory and other one with Elpida. One with Elpida need 1.174v in trixx to work at 1170Mhz and one with Hynix need 1.243. Both works at same temp. ?Posted from Bitcointa.lk - #D9I5f6hyUdInbBFW June 04, 2014, 06:38:11 PM
On r9 280x on any settings above "gpu-engine" : "1120" I get crashes of the drivers - display drivers stopped working, etc... Anyone can post what drivers are you using and with what config, having more than 2.6 mh for a 280 running stable
? June 04, 2014, 06:33:56 PM
here is: "vectors" : "1",
June 04, 2014, 06:20:15 PM
@ lasybear
"vector" or "vectors" ? Anyway.. tried your settings and mine 280x works better with I=18 then rI=81920 - exactly same settings.. strange. Posted from Bitcointa.lk - #xlIIYDOU7T7gwJap June 04, 2014, 06:16:01 PM
x13modold get 1.05Mh/s on HD5850. care to share? It is not much different from previous. is there better settings? June 04, 2014, 04:36:30 PM
x13modold get 1.05Mh/s on HD5850.
It is not much different from previous. is there better settings? June 04, 2014, 02:10:16 PM
the new version give me a stopped working error, if i launch it through a shortcut
was fine in the last one... Jump to:
|
