Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 51. (Read 351555 times)
May 29, 2014, 12:11:46 PM
im getting 2.4~2.5 with above config any tip for 2.7 ?
May 29, 2014, 11:54:09 AM
Anyway here's my 2.7Mh+ conf file for R9 280x:
"intensity" : "16",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"vectors" : "1",
"lookup-gap" : "2",
"shaders" : "2048",
"temp-cutoff" : "95",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
1220/1800 currently hashing @ 2.71
"intensity" : "16",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"vectors" : "1",
"lookup-gap" : "2",
"shaders" : "2048",
"temp-cutoff" : "95",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
1220/1800 currently hashing @ 2.71
I get 2.69~2.7 @ 1150/1500 with 0% power tune...
Core does. But there's just so much you can push it...
May 29, 2014, 11:48:38 AM
Anyway here's my 2.7Mh+ conf file for R9 280x:
"intensity" : "16",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"vectors" : "1",
"lookup-gap" : "2",
"shaders" : "2048",
"temp-cutoff" : "95",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
1220/1800 currently hashing @ 2.71
"intensity" : "16",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"vectors" : "1",
"lookup-gap" : "2",
"shaders" : "2048",
"temp-cutoff" : "95",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
1220/1800 currently hashing @ 2.71
I get 2.69~2.7 @ 1150/1500 with 0% power tune...
May 29, 2014, 11:43:02 AM
Anyway here's my 2.7Mh+ conf file for R9 280x:
"intensity" : "16",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"vectors" : "1",
"lookup-gap" : "2",
"shaders" : "2048",
"temp-cutoff" : "95",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
1220/1800 currently hashing @ 2.71
"intensity" : "16",
"worksize" : "256",
"kernel" : "x13mod",
"thread-concurrency" : "8192",
"vectors" : "1",
"lookup-gap" : "2",
"shaders" : "2048",
"temp-cutoff" : "95",
"api-port" : "4028",
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
1220/1800 currently hashing @ 2.71
May 29, 2014, 11:16:31 AM
Had someone succeeded on running htis mod on older gen Radeons?
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
Yes, I have a 5850 and 14.4 drivers, x11mod works just fine, just from some default settings and underclock gets me 1.07Mh/s. Accepted and all that.I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
I think he meant X13mod.
x13mod kernel is a no go at the moment for the VLIW cards, ie. 5xxx/6xxx series....
May 29, 2014, 11:11:40 AM
Had someone succeeded on running htis mod on older gen Radeons?
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
Yes, I have a 5850 and 14.4 drivers, x11mod works just fine, just from some default settings and underclock gets me 1.07Mh/s. Accepted and all that.I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
I think he meant X13mod.
May 29, 2014, 11:02:43 AM
Actually something broke.
Just got home, and sgminer was reporting hashrates of 1Gh
Unfortunately it didn't translate into any share at the pool. No idea what happened there.
Just restarted it with slightly lower gpu clock speed.
EDIT: there were no HW errors whatsoever though. Very strange.
Just got home, and sgminer was reporting hashrates of 1Gh
Unfortunately it didn't translate into any share at the pool. No idea what happened there.
Just restarted it with slightly lower gpu clock speed.
EDIT: there were no HW errors whatsoever though. Very strange.
May 29, 2014, 09:58:11 AM
Hi Dragon Mike can you put your batch file , i also have r9 280x and just get 1,5mhs
I was getting 1.5 before using the modified kernel. See OP. And use this:"kernel" : "x13mod" (not x11mod)
Will post conf file later from home.
May 29, 2014, 09:50:48 AM
Hi Dragon Mike can you put your batch file , i also have r9 280x and just get 1,5mhs
May 29, 2014, 09:30:07 AM
290X @960/1300 -xintensity 444 -tc 20481 -g 2 -w 128
x13mod --- 3.15mhs
290 @970/1300 -xintensity 512 -tc 20481 -g 2 -w 128
x13mod --- 2.95mhs
somebody, share with *.bin-file from rig with 280x-cards, my mixed rig (3*280x+2*290) cann`t create *.bin-file for 280x/7970 with max.performance, my 280x pulls only 1,7mhs with stock generated *.bin-file
x13mod --- 3.15mhs
290 @970/1300 -xintensity 512 -tc 20481 -g 2 -w 128
x13mod --- 2.95mhs
somebody, share with *.bin-file from rig with 280x-cards, my mixed rig (3*280x+2*290) cann`t create *.bin-file for 280x/7970 with max.performance, my 280x pulls only 1,7mhs with stock generated *.bin-file
May 29, 2014, 09:12:40 AM
Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?
Settings? I'm getting 2.3-2.4 on 280x
Nothing out of the ordinary (except the clocks maybe as my pc is watercooled):
tc@8192
intensity@16
vectors@1
shaders@2048
lookup-gap@2
gpu-threads@2
...
1225/1800
May 29, 2014, 09:07:27 AM
Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?
Settings? I'm getting 2.3-2.4 on 280x
May 29, 2014, 09:05:18 AM
Or not! I don't know why! I try to modify the XI and RI but I don't know how to change!
"Xintensity
rawintensity
The two values
Type sgminer --help>help.txt"Xintensity
rawintensity
The two values
--intensity|-I
--xintensity|-X
--rawintensity
* Experimental `xintensity` setting (by _Kalroth_), see
[commit message](https://github.com/veox/sgminer/commit/7aeae40af22e6108aab8b68a229eea25a639d650).
* Experimental `rawintensity` setting (by _Kalroth_), see
[commit message](https://github.com/veox/sgminer/commit/d11df698d141988491494aa1f29c7d3595e9712b)
My bat for 7870 work fine -k x11mod --gpu-powertune 10 --no-submit-stale --thread-concurrency 5120 -X 300
5120 here is 1280 cores x 4
legendary
Activity: 1862
Merit: 1011
Reverse engineer from time to time
May 29, 2014, 09:05:08 AM
Had someone succeeded on running htis mod on older gen Radeons?
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
Yes, I have a 5850 and 14.4 drivers, x11mod works just fine, just from some default settings and underclock gets me 1.07Mh/s. Accepted and all that. I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
May 29, 2014, 09:04:40 AM
5xxx/6xxx
Unfortunately, still no progress...
If anyone can provide me a remote ssh access to his linux machine with 5xxx/6xxx GPU for tests, please PM.
Unfortunately, still no progress...
If anyone can provide me a remote ssh access to his linux machine with 5xxx/6xxx GPU for tests, please PM.
May 29, 2014, 08:44:51 AM
Had someone succeeded on running htis mod on older gen Radeons?
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
Running x13mod on 5850, no luck either. Any help will be appreciated!
May 29, 2014, 08:39:28 AM
Had someone succeeded on running htis mod on older gen Radeons?
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
I tried on 5850 and 6970
It compiles, runs and NO accepted shares. Just HW increasing
Previous version, which was giving 2-2.1MH on 290 runs fine on these radeons
Using Cat 14.4 because prev version needed these to increase performance (on 13.12 there was no gain)
May 29, 2014, 08:14:32 AM
x11mod for me on my R9-290s get 5c+ hotter @3.5mh/s
i 18 g1 w 512
Anyone getting different results or have some special sauce for the config ?
i 18 g1 w 512
Anyone getting different results or have some special sauce for the config ?
May 29, 2014, 05:39:01 AM
Running 14.6 beta on my 7950. No increase in performance but it looks a bit more stable. Am still on the 'normal' b2 release of the miner though.
May 29, 2014, 05:30:40 AM
Hi, I'm getting 2.7Mh on my R9 280x mining Boostcoin on x13mod. Is that about right?
Jump to: