Antminer B3 Bytom Mining First review - page 15.

dnssandbox

jr. member

Activity: 57

Merit: 5

Quote from: esconceptsz on May 14, 2018, 09:24:11 PM

At the same time I bought the B3 Batch 1 I bought approx. the same value of Bytom outright (2300). So let’s see how long it takes me to mine 2300 Bytom. And it actually needs to be more than to account for electricity. Am at 1328 so far. Next 1000 is going to take awhile, maybe 60-90 days. Will it be worth mining it vs. buying outright?

Similar calculation on my A3 Batch 1. Sia was about .03 USD around the time I got the A3. I could have got about 83k Sia outright. I’ve mined 118k so far, about 5 weeks of that I was hashing with two boards, had to send one for repair. Factor in the cost of electricity and I’m not up by much.

congratulations on the early delivery of the B3.
I am sitting at 375. I have quite a long way to go.

esconceptsz

newbie

Activity: 27

Merit: 0

At the same time I bought the B3 Batch 1 I bought approx. the same value of Bytom outright (2300). So let’s see how long it takes me to mine 2300 Bytom. And it actually needs to be more than to account for electricity. Am at 1328 so far. Next 1000 is going to take awhile, maybe 60-90 days. Will it be worth mining it vs. buying outright?

Similar calculation on my A3 Batch 1. Sia was about .03 USD around the time I got the A3. I could have got about 83k Sia outright. I’ve mined 118k so far, about 5 weeks of that I was hashing with two boards, had to send one for repair. Factor in the cost of electricity and I’m not up by much.

Zibo_

newbie

Activity: 6

Merit: 0

Quote from: achtung082 on May 08, 2018, 09:38:10 AM

Quote from: Zibo_ on May 08, 2018, 09:28:42 AM

Quote from: achtung082 on May 08, 2018, 09:20:01 AM

Quote from: akorsar on May 08, 2018, 02:13:04 AM

Quote from: tw0rak on May 08, 2018, 01:18:28 AM

Guyz - I tried to change speed of the fans...
This shit is screeaming like a pig in my basement and there is no need to be like that - chips have just around 45°C.

U used bitmain-fan-ctrl and pwm in SSH, but this shit doesnt made a change. It doesnt have any fan-ctrl or what?

Could somebody help?
How much temperature could this chips have?
Thinking about giving there some computer fans...

I suggest to disconnect front fan (that what I have done) till they release firmware update. It will drop noise level 50% plus I put under the unit noise cancellation pad. It helped another 10%. Hopefully it helps.

I swapped out both fans for SILVERSTONE FHP Series SST-FHP141-VF, temps don't go above 50 and power at the wall dropped to 280w.

My next test will be to use 2x Phanteks PH-F120MP 120mm PWM High Static Pressure Radiator Fan and or 1x Phanteks + 1x SILVERSTONE. If needed I will put a honeycomb cell on the rear fan.

But the SILVERSTONE FHP Series SST-FHP141-VF is a 140mm fan? I was thinking the same thing as you about changing the fans since it does not need to be as cold as 40C.

Yes, it's 140mm but mounts to 120mm spacing. I used it because it was what I had and have used them on older miners before. I actually have this one SILVERSTONE FHP-141 140mm it has a power and quiet switch.

Have you tried the Phanteks fans yet? I was thinking of buying some equal fans here in Sweden.

t4zer

newbie

Activity: 14

Merit: 0

Quote from: chris-swiss on May 14, 2018, 08:30:31 AM

B3 are very bad invest , just with batch 1 make 20 dollars , with batch 2 make one year for ROI, i never buy bitmain asic

$20/day would mean the rig pays itself off in 90 days...

pudic91

newbie

Activity: 6

Merit: 0

DId anybotdy got payed in coinex wallet?

chris-swiss

jr. member

Activity: 182

Merit: 4

B3 are very bad invest , just with batch 1 make 20 dollars , with batch 2 make one year for ROI, i never buy bitmain asic

mark421421

jr. member

Activity: 44

Merit: 10

Hi All,

I have my B3 running on Antpool.

I have coins on my dashboard, I thought i would wait until the issues settle down before i transferred to the exchange.

Has anyone had success with gate.io?

Which address do i use? BTM or BTM ETH-ERC20 Address

Thanks

aussie-revhead

newbie

Activity: 36

Merit: 0

Quote from: Andartis on May 13, 2018, 08:03:06 AM

So to be honest, I am a bit disappointed about the whole Bytom thing. Paid 2800$ with customs etc. and the performance / profit is not as expected because of the fact they shipped much more units than they initially told.
35 Bytom for about 36h mining. Thats not even 20$ (today). Will keep the coins and see. But I expected double profit at least the first days. But it seems others got their unit way earlier, although i got Batch 1 (Germany).

I think this is a common theme with all Antminers now (probably always was). My X3, which did suffer from the big M fork, is chugging along Ok but well short of what whattomine says.

You have to be in it to win it.

WannaBminer

newbie

Activity: 9

Merit: 0

Quote from: achtung082 on May 08, 2018, 09:20:01 AM

Quote from: akorsar on May 08, 2018, 02:13:04 AM

Quote from: tw0rak on May 08, 2018, 01:18:28 AM

Guyz - I tried to change speed of the fans...
This shit is screeaming like a pig in my basement and there is no need to be like that - chips have just around 45°C.

U used bitmain-fan-ctrl and pwm in SSH, but this shit doesnt made a change. It doesnt have any fan-ctrl or what?

Could somebody help?
How much temperature could this chips have?
Thinking about giving there some computer fans...

I suggest to disconnect front fan (that what I have done) till they release firmware update. It will drop noise level 50% plus I put under the unit noise cancellation pad. It helped another 10%. Hopefully it helps.

I swapped out both fans for SILVERSTONE FHP Series SST-FHP141-VF, temps don't go above 50 and power at the wall dropped to 280w.

My next test will be to use 2x Phanteks PH-F120MP 120mm PWM High Static Pressure Radiator Fan and or 1x Phanteks + 1x SILVERSTONE. If needed I will put a honeycomb cell on the rear fan.

How were the results with the 2x Phanteks on the B3 miner? Did the miner stay cool enough and how was the noise?

Andartis

jr. member

Activity: 306

Merit: 7

I use baikal miners. No self made ones.

nadeaup

jr. member

Activity: 94

Merit: 2

Where did you find mining software for FPGAs?

Andartis

jr. member

Activity: 306

Merit: 7

I am mixing. I have both in my farms. ASICS are fine because they are more easy and stupid and have faster ROI in general.
I started with GPUs but added some ASICS and FGPA as soon as some profit was generated.

MinedTangerine

jr. member

Activity: 308

Merit: 4

Quote from: Andartis on May 13, 2018, 08:03:06 AM

So to be honest, I am a bit disappointed about the whole Bytom thing. Paid 2800$ with customs etc. and the performance / profit is not as expected because of the fact they shipped much more units than they initially told.
35 Bytom for about 36h mining. Thats not even 20$ (today). Will keep the coins and see. But I expected double profit at least the first days. But it seems others got their unit way earlier, although i got Batch 1 (Germany).

Thats why I am sticking with GPUs. When you get your ASIC the network is already saturated and earnings down. And you can't swith to more profitable algorithm.
With GPUs you simply switch algo and keep mining.

Andartis

jr. member

Activity: 306

Merit: 7

So to be honest, I am a bit disappointed about the whole Bytom thing. Paid 2800$ with customs etc. and the performance / profit is not as expected because of the fact they shipped much more units than they initially told.
35 Bytom for about 36h mining. Thats not even 20$ (today). Will keep the coins and see. But I expected double profit at least the first days. But it seems others got their unit way earlier, although i got Batch 1 (Germany).

lswong

newbie

Activity: 59

Merit: 0

Quote from: Mo20 on May 11, 2018, 07:34:25 PM

Quote from: lswong on May 11, 2018, 02:29:42 PM

Quote from: Mo20 on May 11, 2018, 01:01:33 PM

Quote from: lswong on May 11, 2018, 12:45:37 PM

Hi guys,

Please check if someone using HitBTC exchange. My Bytom wallet address was change after few days.
It is same to your guys ?

Bitmain was paying my mined BTM to my old HitBTC exhange. Will the BTM get lost ?

Thanks.

Maybe. Create a support ticket requesting Antpool to change your payment address. Also, send an email to HitBTC explaining what happened.

thanks for your feedback. Can you share me the HitBTC support email ?
I had tried to email them for few times ([email protected]) , but they will never response to my email.

Thanks.

You can create a ticket here
https://support.hitbtc.com/hc/en-us/requests/new?ticket_form_id=360000028325

I had found some useful info from HitBTC forum. Hopefully my btm did not disappear.

My deposit address has changed
Sometimes address may be changed automatically after a software update.
It is recommended to check your current address on your Account page regularly and start using your new address once you notice it was changed.
However, the old address usually remains active within certain timeframe to make sure that all preceding transactions are commited.
No worries, your deposit be reflected on your balance as soon as it comes through.

https://support.hitbtc.com/hc/en-us/articles/360000701865-My-deposit-address-has-changed

Andartis

jr. member

Activity: 306

Merit: 7

Quote from: aussie-revhead on May 12, 2018, 10:33:36 AM

Quote from: Andartis on May 12, 2018, 07:37:19 AM

Hey guys. Is it normal that only the front fan runs at the beginning? Just plugged it in. Its very loud, I did not expect that since the low power consumption.

Regards

Yes mate, a few guys mentioned that they must have used S9 fans at full speed on these things and that they run quite well with the rear fan disconnected. Another dude replaced his fans with Coolermaster fans and his is cool and quiet.

Thanks for the hint. Can you say which type of cooler they used? 4pin PWM? I am not at the farm right now and would like to order one since it seems a bit of an overkill what they have installed...

Mo20

copper member

Activity: 112

Merit: 8

Quote from: dnssandbox on May 12, 2018, 07:51:20 AM

so much for the guess that Bitmain only sold 2500 to each market.

http://miningpoolstats.stream/bytom

looks more like 5000 to each market (there are already 11225 machines online and rising), plus they might be running a third batch. this explains why earnings was already down to 40-42 yesterday.

It wasn't a guess. Most Bitmains customer service representatives confirmed that a total of 2500 units are sold in batch 1.

aussie-revhead

newbie

Activity: 36

Merit: 0

Quote from: Andartis on May 12, 2018, 07:37:19 AM

Hey guys. Is it normal that only the front fan runs at the beginning? Just plugged it in. Its very loud, I did not expect that since the low power consumption.

Regards

Yes mate, a few guys mentioned that they must have used S9 fans at full speed on these things and that they run quite well with the rear fan disconnected. Another dude replaced his fans with Coolermaster fans and his is cool and quiet.

dnssandbox

jr. member

Activity: 57

Merit: 5

so much for the guess that Bitmain only sold 2500 to each market.

http://miningpoolstats.stream/bytom

looks more like 5000 to each market (there are already 11225 machines online and rising), plus they might be running a third batch. this explains why earnings was already down to 40-42 yesterday.

Andartis

jr. member

Activity: 306

Merit: 7

Hey guys. Is it normal that only the front fan runs at the beginning? Just plugged it in. Its very loud, I did not expect that since the low power consumption.

Regards

Topic: Antminer B3 Bytom Mining First review - page 15. (Read 9423 times)