I can get to SSH login but cant login previous owner didnt give me the pass...
any solution to this?
Topic: ANTMINER C1 Discussion and Support Thread - page 10. (Read 129188 times)
My c1 is not reseting whit the reset button. i am using Cooler Master Real Power M1000 1000w
I can get to SSH login but cant login previous owner didnt give me the pass...
any solution to this?
I can get to SSH login but cant login previous owner didnt give me the pass...
any solution to this?
@ dogie...--
got any idea as to hash speed/ kw/gh /price ?
No, you'll have to wait for the announcement. got any idea as to hash speed/ kw/gh /price ?
@ dogie...--
got any idea as to hash speed/ kw/gh /price ?
got any idea as to hash speed/ kw/gh /price ?
got this from bitM today
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
Referencing a watercooled miner or an air cooled?
Standard air cooled miner.
got this from bitM today
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
Referencing a watercooled miner or an air cooled?
i suspect aircool but they arent specifying.. however, since they mentioned a release of S7 jul/aug, the cards say aircool also.
got this from bitM today
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
Referencing a watercooled miner or an air cooled?
got this from bitM today
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
"Bitmain (Bitmain)
May 12, 17:19
Yes, the newer model with new chips be planned for later July/Early August!
Please stay tuned!
Thank you for supporting Bitmain!"
If I have a coolmax 1200 psu would it be recommended if I put a c1 and an s3, clocked normally into both??
Downclock the maximum you can.
If I have a coolmax 1200 psu would it be recommended if I put a c1 and an s3, clocked normally into both??
I buy defective Antminer C1, S3, S5 ... or individual parts. Thank you for the offer.
Location would help, as would posting in the marketplace subforum: https://bitcointalk.org/index.php?board=75.0
I buy defective Antminer C1, S3, S5 ... or individual parts. Thank you for the offer.
You have city water coming in and you plan to drain hot water out of the loop?
well... i can get under ambient temps on my 2 c1 just letting the water run 
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
Wow, I'd like to live somewhere there's distilled water coming out the tap.
I definitely did not trust my local water. I made sure to use some of the water cooling coolant. Has worked very well.
Run's good and no build up issues or corrosion that I have seen. So I'm very happy with performance.
You have city water coming in and you plan to drain hot water out of the loop?
well... i can get under ambient temps on my 2 c1 just letting the water run
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
Wow, I'd like to live somewhere there's distilled water coming out the tap.
You have city water coming in and you plan to drain hot water out of the loop?
well... i can get under ambient temps on my 2 c1 just letting the water run
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
well... i can get under ambient temps on my 2 c1 just letting the water run
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
loops are balanced, there is no problem there. after i switched the pumps, the same problem with the same pump! ........
this days i will install the 220v pump and take care of safety with some automatic dumping of hot water when temps reach 50 or so
2 identical and parallel loops with 1 common ''radiator'' and one of the pumps is so fuckin' bad!!!
the good pump pumps liquid the other way in the bad one!!!
......
the good pump pumps liquid the other way in the bad one!!!
......
I can see parallel not working well.
I have 2 C1 in series. Two pumps in the loop. Output of the first C1, hot, goes to a car AC condenser with various fans mounted I used while awaiting the arrival of a radiator for the second C1. The condenser goes to a pump into C2 cold (pump sees cooler water), then output of the second C1 went to a stock radiator with the 3 stock fans and then to a stock pump and on to the cool intake of the first C1. The second radiator arrived and since the condenser was cooling better than the stock radiator, I put the two radiators in series before the pump to the first C1.
So, I have solid cooling although I note two of the fans on the second radiator, an aftermarket, seemed to be running slow the other day.
The way you tried it was to load up two C1's with a single radiator!?. Even if the load were magically distributed equally I don't think you'd get proper cooling in warm or hot weather.
I am in summer now hitting 80's sometimes. I can confirm I would not share a single radiator for two C1's in very hot weather.
I did make my miners life's a little better with adding fan's on the back. I'm using front and back fan's now. I did get a molex to 3 pin adapter to hook them all up. That and a regular old fan seem to have them running great even during summer heat.
2 identical and parallel loops with 1 common ''radiator'' and one of the pumps is so fuckin' bad!!!
the good pump pumps liquid the other way in the bad one!!!
......
the good pump pumps liquid the other way in the bad one!!!
......
I can see parallel not working well.
I have 2 C1 in series. Two pumps in the loop. Output of the first C1, hot, goes to a car AC condenser with various fans mounted I used while awaiting the arrival of a radiator for the second C1. The condenser goes to a pump into C2 cold (pump sees cooler water), then output of the second C1 went to a stock radiator with the 3 stock fans and then to a stock pump and on to the cool intake of the first C1. The second radiator arrived and since the condenser was cooling better than the stock radiator, I put the two radiators in series before the pump to the first C1.
So, I have solid cooling although I note two of the fans on the second radiator, an aftermarket, seemed to be running slow the other day.
The way you tried it was to load up two C1's with a single radiator!?. Even if the load were magically distributed equally I don't think you'd get proper cooling in warm or hot weather.
nice pump! wish i can find something like that in romania!
my system is different, i will make a thread about it
i ordered an 220v pump for central heating....
my system is different, i will make a thread about it
i ordered an 220v pump for central heating....
It's kinda a generic pump. If you would rather you can get it from China with free shipping - http://www.ebay.com/itm/500L-H-10W-DC12V-CPU-Cooling-Heat-Exchanger-Water-Pump-Tank-CO2-Cooler-Mute-pc-/121290018389?pt=LH_DefaultDomain_0&hash=item1c3d72ce55
Only thing is it does not appear to have the LED and uses one plastic clamp instead of two. So not being in US this is a better choice for you as it's cheaper and free shipping.
nice pump! wish i can find something like that in romania!
my system is different, i will make a thread about it
i ordered an 220v pump for central heating....
my system is different, i will make a thread about it
i ordered an 220v pump for central heating....
2 identical loops with 1 common radiator and one pump is so bad!!!
the good pump, pumps liquid the other way in the bad one!!!
......
the good pump, pumps liquid the other way in the bad one!!!
......
Sorry to hear about it. I suggest trying one of these pumps in it's place. - http://www.ebay.com/itm/381066536924
Have had them since around first week of C1's. They keep on going no issues. And I like leds... it lights UP
Jump to: