https://www.screencast.com/t/qZSwdTdWd
1 board hashing much lower on 2.04, 1.12 everything is ok on the same settings.
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 12. (Read 125923 times)
its an antpool problem
many others have this problem to
https://twitter.com/AntPoolBITMAIN/status/946760972106002432
many others have this problem to
https://twitter.com/AntPoolBITMAIN/status/946760972106002432
any idea why this is happening?
https://i.imgur.com/Dx30uIw.jpg
my d3 ran for 24 hours @ 500 freq without hw errors or reboots, but still that chart looks insane and doesnt make any sense...
https://i.imgur.com/dFOOd6h.jpg
any idea?
Before Christmas you announced, that you where working on a v2.0 BETA. When will it come for us to try?
Best regards.
Best regards.
my 3 chain chip temps are 65 69 69 is it ok?
Kind of chilly, start worrying if they reach 90C.
my 3 chain chip temps are 65 69 69 is it ok?
I keep getting connection problems on my main pool. This has happened on several pools since I changed to Blissz. Does this have something to dev mining? It'll be fine the first day or so and then I"ll get random connection errors or rejected shares showing on the pool with about 50% of hash rate missing.
Any possible opportunity or a plan to support other than X11 algorithm with D3 ? Is this a possible ask ?
LOL, it's cool you asked, but this question has been asked so many times before. Yes it's possible, but from past conversations the firmware on the D3's makes it not possible to do so.
A bit quiet from my side, but I have been busy on the background and I have some good news for you guys:
I managed to make the v2.0x beta a lot more stable. So hopefully I am able to have a stable 2.0x version soon. From there more features will be added for the D3.
Furthermore I bought a L3+ (mainly from the dev fee, so thank you all!) and I got some good news on that:
I was able to unlock the voltage on the L3+!
As the L3+ got some headroom for overclocking a bit of overvolting can be useful for the first months. After that you probably want to undervolt it to save power as more L3's will come online. (my L3+ mines 500Mh/s @ ~680 watts from the wall now)
Please don't ask for a L3 test version yet, as it's not even close to Beta stage yet and it seems I bricked some of the chains during testing which I have to fix first.
But this is definitely a breakthrough for the L3, so there will be a first L3 beta version available within two weeks I guess.
Awesome! I have an L3+ that is overclocking very well except for 1 board. Every time I see that board with lots of HW errors, holding me back from overclocking further, I wish I had the per-board settings I have in the D3 thanks to your firmware.I managed to make the v2.0x beta a lot more stable. So hopefully I am able to have a stable 2.0x version soon. From there more features will be added for the D3.
Furthermore I bought a L3+ (mainly from the dev fee, so thank you all!) and I got some good news on that:
I was able to unlock the voltage on the L3+!
As the L3+ got some headroom for overclocking a bit of overvolting can be useful for the first months. After that you probably want to undervolt it to save power as more L3's will come online. (my L3+ mines 500Mh/s @ ~680 watts from the wall now)
Please don't ask for a L3 test version yet, as it's not even close to Beta stage yet and it seems I bricked some of the chains during testing which I have to fix first.
But this is definitely a breakthrough for the L3, so there will be a first L3 beta version available within two weeks I guess.
Side note: It's sad some greedy people keep complaining about the small dev fee. How can't they see that developers deserve it, and individually we pay peanuts for it.
A bit quiet from my side, but I have been busy on the background and I have some good news for you guys:
I managed to make the v2.0x beta a lot more stable. So hopefully I am able to have a stable 2.0x version soon. From there more features will be added for the D3.
Furthermore I bought a L3+ (mainly from the dev fee, so thank you all!) and I got some good news on that:
I was able to unlock the voltage on the L3+!
As the L3+ got some headroom for overclocking a bit of overvolting can be useful for the first months. After that you probably want to undervolt it to save power as more L3's will come online. (my L3+ mines 500Mh/s @ ~680 watts from the wall now)
Please don't ask for a L3 test version yet, as it's not even close to Beta stage yet and it seems I bricked some of the chains during testing which I have to fix first.
But this is definitely a breakthrough for the L3, so there will be a first L3 beta version available within two weeks I guess.
I managed to make the v2.0x beta a lot more stable. So hopefully I am able to have a stable 2.0x version soon. From there more features will be added for the D3.
Furthermore I bought a L3+ (mainly from the dev fee, so thank you all!) and I got some good news on that:
I was able to unlock the voltage on the L3+!
As the L3+ got some headroom for overclocking a bit of overvolting can be useful for the first months. After that you probably want to undervolt it to save power as more L3's will come online. (my L3+ mines 500Mh/s @ ~680 watts from the wall now)
Please don't ask for a L3 test version yet, as it's not even close to Beta stage yet and it seems I bricked some of the chains during testing which I have to fix first.
But this is definitely a breakthrough for the L3, so there will be a first L3 beta version available within two weeks I guess.
This should be interesting! I'm helping a friend run their L3+'s (they have two) and we've been able to overclock them to 600~625 MH/s with basically no HW errors. If you can do the same with lower voltages, could definitely increase profitability of the L3's!
Any possible opportunity or a plan to support other than X11 algorithm with D3 ? Is this a possible ask ?
A bit quiet from my side, but I have been busy on the background and I have some good news for you guys:
I managed to make the v2.0x beta a lot more stable. So hopefully I am able to have a stable 2.0x version soon. From there more features will be added for the D3.
Furthermore I bought a L3+ (mainly from the dev fee, so thank you all!) and I got some good news on that:
I was able to unlock the voltage on the L3+!
As the L3+ got some headroom for overclocking a bit of overvolting can be useful for the first months. After that you probably want to undervolt it to save power as more L3's will come online. (my L3+ mines 500Mh/s @ ~680 watts from the wall now)
Please don't ask for a L3 test version yet, as it's not even close to Beta stage yet and it seems I bricked some of the chains during testing which I have to fix first.
But this is definitely a breakthrough for the L3, so there will be a first L3 beta version available within two weeks I guess.
I managed to make the v2.0x beta a lot more stable. So hopefully I am able to have a stable 2.0x version soon. From there more features will be added for the D3.
Furthermore I bought a L3+ (mainly from the dev fee, so thank you all!) and I got some good news on that:
I was able to unlock the voltage on the L3+!
As the L3+ got some headroom for overclocking a bit of overvolting can be useful for the first months. After that you probably want to undervolt it to save power as more L3's will come online. (my L3+ mines 500Mh/s @ ~680 watts from the wall now)
Please don't ask for a L3 test version yet, as it's not even close to Beta stage yet and it seems I bricked some of the chains during testing which I have to fix first.
But this is definitely a breakthrough for the L3, so there will be a first L3 beta version available within two weeks I guess.
is this open source?
Hi,
i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)
On one D3 its running unbelievable good!
910W 18.500 MH/S
On the other D3 there was a lot of HWs and suddenly the 3rd chain is disappeared!?
(Voltage 3, Auto adjust)
Could you please help me? Im afraid that the d3 is dead...
Thanks and best regards
i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)
On one D3 its running unbelievable good!
910W 18.500 MH/S
On the other D3 there was a lot of HWs and suddenly the 3rd chain is disappeared!?
(Voltage 3, Auto adjust)
Could you please help me? Im afraid that the d3 is dead...
Thanks and best regards
My 2nd chains is gone as well ..but before that there is a problem and a lot of HW as well ....sad
It can be that the low voltage is not working for one of the chains. Increase the voltage or flash back the stable Blissz version on that D3 from the topic start
Hi,
i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)
On one D3 its running unbelievable good!
910W 18.500 MH/S
On the other D3 there was a lot of HWs and suddenly the 3rd chain is disappeared!?
(Voltage 3, Auto adjust)
Could you please help me? Im afraid that the d3 is dead...
Thanks and best regards
i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)
On one D3 its running unbelievable good!
910W 18.500 MH/S
On the other D3 there was a lot of HWs and suddenly the 3rd chain is disappeared!?
(Voltage 3, Auto adjust)
Could you please help me? Im afraid that the d3 is dead...
Thanks and best regards
My 2nd chains is gone as well ..but before that there is a problem and a lot of HW as well ....sad
Hi,
i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)
On one D3 its running unbelievable good!
910W 18.500 MH/S
On the other D3 there was a lot of HWs and suddenly the 3rd chain is disappeared!?
(Voltage 3, Auto adjust)
Could you please help me? Im afraid that the d3 is dead...
Thanks and best regards
i have just tested your firmware. (v2.04 beta :: 22/12 :: test version)
On one D3 its running unbelievable good!
910W 18.500 MH/S
On the other D3 there was a lot of HWs and suddenly the 3rd chain is disappeared!?
(Voltage 3, Auto adjust)
Could you please help me? Im afraid that the d3 is dead...
Thanks and best regards
"Would it be possible to point only one hash board at the dev pool instead of redirecting the whole miner? Every time dev fee drops connection to my pool then reconnects the hash rate doesn't register properly"
Yes this is a problem for me too ! Sometimes it takes another minute or two until we have proper work.
I think its better to mine the dev fee for the whole day at once or at least we have an option for that.
Yes this is a problem for me too ! Sometimes it takes another minute or two until we have proper work.
I think its better to mine the dev fee for the whole day at once or at least we have an option for that.
Finally got my miner to work because of this. Now all I need to know is what pool to mine on 
.
.
Has the Dev Fee been removed yet? I don't mind Paying a price for the firmware it works well, but to have my miners constantly give up hashing power on one site altogether is not ideal.
One suggestion for the firmware.
Button/checkbox/timer something where i can tell mine 30 minutes or so for your now and then mine the rest of the
day for me without interrupting mining process.
Now its really bad for you and for me.
Each 2 hours it stops and mine for you. During this time you and me loose time until machine gets
fast new work.
So my suggestion is for an option to start mine for your part your minutes for 24 hours and then mine all the rest for
me. No stops until the next day.
May be some will have better suggestions ?
Button/checkbox/timer something where i can tell mine 30 minutes or so for your now and then mine the rest of the
day for me without interrupting mining process.
Now its really bad for you and for me.
Each 2 hours it stops and mine for you. During this time you and me loose time until machine gets
fast new work.
So my suggestion is for an option to start mine for your part your minutes for 24 hours and then mine all the rest for
me. No stops until the next day.
May be some will have better suggestions ?
Jump to: