Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 13. (Read 125911 times)
Just wanted to thank you for this awesome firmware patch. I had lots of issues with the original firmware because I got lots of HW errors and the miners started randomly stall and reboot which was really annoying due to the full fan speed up each time. This always happened in the middle of the night and my neighbours were already complaining. I now save money with the lower power consumption and get way more uptime due to the advanced firmware. The 1.5 dev fee is well worth it I can get 20-30% better performance. One feature I would love for the future would be an automatic night/day mode where the frequency, voltage and fan speed changes accordingly to the time. So I can mine at a maximum profit during the day and at low noise during the night. THANKS!
Hello friend, tell me how to configure the solo mining on Antminer d3 (if the purse is local to me) I have already spent 3 days on it and I did not get it.
coin Monkey
I put your firmware but I need help. but no one can tell me what to do SOLO mining. Help me how to do it.
I don `t know to whom even I will turn for help, I really hope for you.
I made a bat file with the data:
Monkey-qt-v1.4.1 -server = 1 -daemon = 1 -rpcuser = Xuser -rpcpassword = Q123456789 -rpcallowip = 127.0.0.1 -rpcport = 8710
to run the coin in server mode (and I see through the browser that it requests an authorization window, then the server is working)
After I write the data in the .conf file
rpcuser = Xuser
rpcpassword = Q123456789
rpcallowip = 192.168.1.35
rpcallowip = 192.168.1. *
rpcport = 8710
daemon = 1
listen = 1
server = 1
addnode = 109.173.80.132: 8710
addnode = 114.235.119.175: 8710
addnode = 45.248.70.46: 8710
addnode = 113.0.32.178: 8710
addnode = 94.245.179.217: 8710
addnode = 58.248.148.234: 8710
addnode = 180.111.45.230: 8710
addnode = 180.172.235.111: 8710
The address of the computer on which the wallet is located 192.168.1.33
address of the Antminer d3 192.168.1.35
after I prescribe in the data
127.0.0.1:8710
login: Xuser
Password: Q123456789
and still writes POST.b] HELP ME PLS
coin Monkey
I put your firmware but I need help. but no one can tell me what to do SOLO mining. Help me how to do it.
I don `t know to whom even I will turn for help, I really hope for you.
I made a bat file with the data:
Monkey-qt-v1.4.1 -server = 1 -daemon = 1 -rpcuser = Xuser -rpcpassword = Q123456789 -rpcallowip = 127.0.0.1 -rpcport = 8710
to run the coin in server mode (and I see through the browser that it requests an authorization window, then the server is working)
After I write the data in the .conf file
rpcuser = Xuser
rpcpassword = Q123456789
rpcallowip = 192.168.1.35
rpcallowip = 192.168.1. *
rpcport = 8710
daemon = 1
listen = 1
server = 1
addnode = 109.173.80.132: 8710
addnode = 114.235.119.175: 8710
addnode = 45.248.70.46: 8710
addnode = 113.0.32.178: 8710
addnode = 94.245.179.217: 8710
addnode = 58.248.148.234: 8710
addnode = 180.111.45.230: 8710
addnode = 180.172.235.111: 8710
The address of the computer on which the wallet is located 192.168.1.33
address of the Antminer d3 192.168.1.35
after I prescribe in the data
127.0.0.1:8710
login: Xuser
Password: Q123456789
and still writes POST.b] HELP ME PLS
You have 2 mistakes, the 1st is that you wrote rpcallowip = 127.0.0.1, this mean to your Wallet can only connect the Computer the Wallet is running on. but your D3 is a external Computer so he never get Access, to the Wallet, and then you wrote in the Config the correct line, don´t ask me what come 1st, Startparameter or Config.
IP 127.0.0.1 is only the Computer that you are running the Software like a Internal IP!
to connect you need the normal IP of your Computer x.x.x.33 and then login data
butthe 2nd mistake is that, the D3 use STRATUM protocol and the Wallet´s not support it! you can not mine direct Miner -> Wallet, you need something between them like a pool software or a Proxy.
Dear All ,
I am really newbie and first time using this after I found out something wrong with my D3 , I try to update the latest firmware from Bitmain it appear failed which showed (tar: invalid magic tar: short read)
Therefore I try to use the latest Blissz which appear that my mining also have some problem. My Pool #2 on Lst portion : never , #3 as well
For Chain #2 totally missing from the page and only remaining #1 & #3.
Earlier stage when I using original Bitman version , Chain #2 on asic are showing xxxx.xxx.xxx.xx
Any pro can save me here ?
Thanks and Appreciate
I hope I can post picture however I understand that only jr+ member only able to
I am really newbie and first time using this after I found out something wrong with my D3 , I try to update the latest firmware from Bitmain it appear failed which showed (tar: invalid magic tar: short read)
Therefore I try to use the latest Blissz which appear that my mining also have some problem. My Pool #2 on Lst portion : never , #3 as well
For Chain #2 totally missing from the page and only remaining #1 & #3.
Earlier stage when I using original Bitman version , Chain #2 on asic are showing xxxx.xxx.xxx.xx
Any pro can save me here ?
Thanks and Appreciate
I hope I can post picture however I understand that only jr+ member only able to
Can I just say that this is the best thing to happen to the D3 since the D3 itself? @Blissz any chance of an L3+ mod? 1.5% of L3+ profits will be more, just saying 
he do not own L3+ so he cant do it
Can I just say that this is the best thing to happen to the D3 since the D3 itself? @Blissz any chance of an L3+ mod? 1.5% of L3+ profits will be more, just saying
Hello friend, tell me how to configure the solo mining on Antminer d3 (if the purse is local to me) I have already spent 3 days on it and I did not get it.
coin Monkey
I put your firmware but I need help. but no one can tell me what to do SOLO mining. Help me how to do it.
I don `t know to whom even I will turn for help, I really hope for you.
I made a bat file with the data:
Monkey-qt-v1.4.1 -server = 1 -daemon = 1 -rpcuser = Xuser -rpcpassword = Q123456789 -rpcallowip = 127.0.0.1 -rpcport = 8710
to run the coin in server mode (and I see through the browser that it requests an authorization window, then the server is working)
After I write the data in the .conf file
rpcuser = Xuser
rpcpassword = Q123456789
rpcallowip = 192.168.1.35
rpcallowip = 192.168.1. *
rpcport = 8710
daemon = 1
listen = 1
server = 1
addnode = 109.173.80.132: 8710
addnode = 114.235.119.175: 8710
addnode = 45.248.70.46: 8710
addnode = 113.0.32.178: 8710
addnode = 94.245.179.217: 8710
addnode = 58.248.148.234: 8710
addnode = 180.111.45.230: 8710
addnode = 180.172.235.111: 8710
The address of the computer on which the wallet is located 192.168.1.33
address of the Antminer d3 192.168.1.35
after I prescribe in the data
127.0.0.1:8710
login: Xuser
Password: Q123456789
and still writes POST.b] HELP ME PLS
coin Monkey
I put your firmware but I need help. but no one can tell me what to do SOLO mining. Help me how to do it.
I don `t know to whom even I will turn for help, I really hope for you.
I made a bat file with the data:
Monkey-qt-v1.4.1 -server = 1 -daemon = 1 -rpcuser = Xuser -rpcpassword = Q123456789 -rpcallowip = 127.0.0.1 -rpcport = 8710
to run the coin in server mode (and I see through the browser that it requests an authorization window, then the server is working)
After I write the data in the .conf file
rpcuser = Xuser
rpcpassword = Q123456789
rpcallowip = 192.168.1.35
rpcallowip = 192.168.1. *
rpcport = 8710
daemon = 1
listen = 1
server = 1
addnode = 109.173.80.132: 8710
addnode = 114.235.119.175: 8710
addnode = 45.248.70.46: 8710
addnode = 113.0.32.178: 8710
addnode = 94.245.179.217: 8710
addnode = 58.248.148.234: 8710
addnode = 180.111.45.230: 8710
addnode = 180.172.235.111: 8710
The address of the computer on which the wallet is located 192.168.1.33
address of the Antminer d3 192.168.1.35
after I prescribe in the data
127.0.0.1:8710
login: Xuser
Password: Q123456789
and still writes POST.b] HELP ME PLS
On that note, blissz, can you confirm that you are redirecting mining pools for 90 seconds per hour? Is that correct?
Thanks.
Thanks.
You can check the kernel log: it's actually 110 seconds and then two hours on your pools. So 1,5%
Unless there is something wrong with my miners but they would execute the api within minutes of booting up then the accepted shares stop increasing and 20 minutes later i still see no shares my pools dont show my miners anymore so the api for the dev fee is taking longer then 110 sec. Hashrate is fine 100%. Happens a few times ive never bothered waiting for the dev fee pool to finish mining. I ve changed settings up down and default it dont matter. It just stays on the fee pool for too long or fails to change back. Havent used miners consistently for awhile maybe it mines the dev fee longer when u dont run the miner for awhile. Its an awesome firmware but its not worth losing all that time not mining. Uninstalled the blizz firmware, works fine now.
Happy New Year to ya all 
Best profit and luck ;-)
Best profit and luck ;-)+1 to all d3 owners here! Thanks
On that note, blissz, can you confirm that you are redirecting mining pools for 90 seconds per hour? Is that correct?
Thanks.
Thanks.
You can check the kernel log: it's actually 110 seconds and then two hours on your pools. So 1,5%
Is there a way to block the dev pools?
yes it is, use bitmain firmware when you make 10$ and not willing to pay even 0.15$ for service, it says a lot about you
On that note, blissz, can you confirm that you are redirecting mining pools for 90 seconds per hour? Is that correct?
Thanks.
Hi Team Really apreciate all the efforts done, I have a realy strange problem after little while from workin with my D3 upgrade with your last software, the machine did not recognise the login/passwd i have change nothing i don't know why !
Can anyone help me please ?
Thanks in advance
Can anyone help me please ?
Thanks in advance
can you check the corresponding ip first ?? of your machine ? is it the same ?? or just cache ....
Hi Team Really apreciate all the efforts done, I have a realy strange problem after little while from workin with my D3 upgrade with your last software, the machine did not recognise the login/passwd i have change nothing i don't know why !
Can anyone help me please ?
Thanks in advance
Can anyone help me please ?
Thanks in advance
Happy New Year to ya all Best profit and luck ;-)
Best profit and luck ;-) 
One of my D3 (batch1 17.0G) behaving very well i must say...
Stable 22GH/s
Voltage 14,13,14
Freq 594,575,594
Fan auto performance
Wattage from the wall 1330W
Stable 22GH/s
Voltage 14,13,14
Freq 594,575,594
Fan auto performance
Wattage from the wall 1330W
hello, happy new year!
I wish to you all ROI with D3 max 7 months
best regards
I wish to you all ROI with D3 max 7 months
best regards
Is there a way to block the dev pools?
yes it is, use bitmain firmware
when you make 10$ and not willing to pay even 0.15$ for service, it says a lot about you
Is there a way to block the dev pools?
READ this thread. SEARCH this thread. Don't just POST.
Is there a way to block the dev pools?
Can you please put the voltage in the status section? It's hard to calculate efficiency with that missing in the status area. Thanks.
It´s not possible to calculate your efficiency with the voltage settings in the miner, every miner is different, it´s depend on your PSU, tooThe only correct way to calculate is with messure the watt usage on your PSU, that you get W/GH.
Can you please put the voltage in the status section? It's hard to calculate efficiency with that missing in the status area.
Thanks.
Thanks.
It´s not possible to calculate your efficiency with the voltage settings in the miner, every miner is different, it´s depend on your PSU, too
The only correct way to calculate is with messure the watt usage on your PSU, that you get W/GH.
Jump to: