Sorry, just again bringing up the profit switching capabilities that are out there. This is from AwesomeMiner.
External Profit Switching (for ASIC's and Antminers)
Awesome Miner will not add or change any pools on the miner. The profit switcher will only look at the pools already defined on the miner and change the priority of them. The priority is set based on profitability. The profitability of the pool must be known to Awesome Miner, either by using one of the supported multi-pools or by using a coin listed on the Coins tab.
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 16. (Read 125923 times)
The Baikal Miner X10 for example, started with X11/Quark/Qubit Algorythm
Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
Baikal uses FPGAs, not ASICS. The "P" in FPGA stands for "programmable"... Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
really? oh damn im sorry for beeing that blind
Hello blissz i have upgrade your firmware and lost chain 3
my log kernel
please fix my problem
my log kernel
Code:
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
please fix my problem
Please fix your glasses. The D3 has only 3 chains. (0,1,2)
Could have sworn it does four...If someone had an extra hashborad would it not be possible to plug and play it?
Hey I meant no disrespect. I only have couple d3s so really not a huge difference. If you have a farm of these its definitely worth it. I was wondering if there is a possibility of adding some sort of a dongle in order to add the difference between x11 and x13? Otherwise I suggest we boycot Bitmains every product thats coming out because lets face it. Sometimes they don't deliver on the promise. Its not a good way for a global company a leader in the field. I say unacceptable. They should offer us a discount. A trade in, A solution. An upgrade. lol "new mythical x13 algo ability". What I am saying. They dumped this on the rest of the planet and it really is unfair. We should indeed start to question their integrity as well as values and vision and mission. What I am saying is that there are lover and haters. those with d3s currently seem to be hating. But hey its almost 2018. I mean talk about dash. 2mb block size. Instant transfers. I am not sure about the fees... for instant transfer of 1000$ lets say I wanna pay at walmart for a new tv. I mean bitcoin, yes. Pioneer. Future? ....maybe maybe not. I can only speculate. But hovering around 100 mill diff is not very awesome right now. Boycott Bitmain campain. we should put in a suggestion for funding any one down? Sorry i know its a negative publicity. Some say negative publicity can be good. But not this time. We do not need much funds to make sure the messages gets all the way to the chinese servers and i am sure there it will rest lol. Likely never reaching the chinese "clear net" lol. Wtf do they think they are, here. Bitmain. Bit yes, Main i am not so sure about it. There are so many resolutions to these issues. I mean they could help. How about taking their d3s off line so they can let us recover.... It really ain't fair. How long would i take to recover 1450$ if the bitmain fuckers shut off their d3s mining farms? Likely not too too long. Is there a way someone can write a jammer and send it to them in an email to kill all their asic hashboards lol hehe. Shit we are tweaking and tweaking but when it comes down to it. It effing blows right now.
already tried and did not work
Try to switch the chain cables on logicboard 0 to 1, 1 to 2, 2 to 0.
You can test port 3 too.
ok I'll try tomorrow, thanks
already tried and did not work
Try to switch the chain cables on logicboard 0 to 1, 1 to 2, 2 to 0.
You can test port 3 too.
I miss a chain because? which?
I have another D3 and have three chain 1-2-3
Make a rollback to bitmain firmware and reset your D3. Then check your chains and install Blissz.
already tried and did not work
I miss a chain because? which?
I have another D3 and have three chain 1-2-3
Make a rollback to bitmain firmware and reset your D3. Then check your chains and install Blissz.
Hello blissz i have upgrade your firmware and lost chain 3
my log kernel
please fix my problem
my log kernel
Code:
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
please fix my problem
Please fix your glasses. The D3 has only 3 chains. (0,1,2)
I miss a chain because? which?
I have another D3 and have three chain 1-2-3
Hello blissz i have upgrade your firmware and lost chain 3
my log kernel
please fix my problem
my log kernel
Code:
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
please fix my problem
Please fix your glasses. The D3 has only 3 chains. (0,1,2)
The Baikal Miner X10 for example, started with X11/Quark/Qubit Algorythm
Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
Baikal uses FPGAs, not ASICS. The "P" in FPGA stands for "programmable"... Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
Hello blissz i have upgrade your firmware and lost chain 3
my log kernel
please fix my problem
my log kernel
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015437] pid_max: default: 32768 minimum: 301
[ 0.015668] Security Framework initialized
[ 0.015764] Mount-cache hash table entries: 512
[ 0.024590] Initializing cgroup subsys cpuacct
[ 0.024621] Initializing cgroup subsys memory
[ 0.024684] Initializing cgroup subsys blkio
[ 0.024818] CPU: Testing write buffer coherency: ok
[ 0.025388] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025462] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026791] Brought up 1 CPUs
[ 0.026815] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028107] devtmpfs: initialized
[ 0.092454] pinctrl core: initialized pinctrl subsystem
[ 0.092668] rstctl core: initialized rstctl subsystem
[ 0.093159] regulator-dummy: no parameters
[ 0.093733] NET: Registered protocol family 16
[ 0.094437] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104118] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104303] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105398] platform 49000000.edma: alias fck already exists
[ 0.105431] platform 49000000.edma: alias fck already exists
[ 0.105459] platform 49000000.edma: alias fck already exists
[ 0.106612] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106794] OMAP GPIO hardware version 0.1
[ 0.108206] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109530] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110846] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111476] of_get_named_gpio_flags exited with status 52
[ 0.111508] gpio-rctrl rstctl.3: loaded OK
[ 0.116606] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119811] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.121998] cpsw.0: No hwaddr in dt. Using 3c:a3:08:20:34:7b from efuse
[ 0.122032] cpsw.1: No hwaddr in dt. Using 3c:a3:08:20:34:7d from efuse
[ 0.137576] bio: create slab at 0
[ 0.149685] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.149926] of_get_named_gpio_flags: can't parse gpios property
[ 0.150218] vmmcsd_fixed: 3300 mV
[ 0.153330] SCSI subsystem initialized
[ 0.153780] usbcore: registered new interface driver usbfs
[ 0.153895] usbcore: registered new interface driver hub
[ 0.154231] usbcore: registered new device driver usb
[ 0.156339] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156373] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156567] media: Linux media interface: v0.10
[ 0.156664] Linux video capture interface: v2.00
[ 0.156779] pps_core: LinuxPPS API ver. 1 registered
[ 0.156795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.157513] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158696] Switching to clocksource gp_timer
[ 0.176705] NET: Registered protocol family 2
[ 0.177694] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177783] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177873] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.177964] TCP: reno registered
[ 0.177991] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178037] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178530] NET: Registered protocol family 1
[ 0.179118] RPC: Registered named UNIX socket transport module.
[ 0.179140] RPC: Registered udp transport module.
[ 0.179153] RPC: Registered tcp transport module.
[ 0.179167] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179558] Trying to unpack rootfs image as initramfs...
[ 1.941823] Freeing initrd memory: 12240K
[ 1.942548] CPU PMU: probing PMU on CPU 0
[ 1.942582] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.943120] omap2_mbox_probe: platform not supported
[ 1.947013] VFS: Disk quotas dquot_6.5.2
[ 1.947250] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.948645] NFS: Registering the id_resolver key type
[ 1.948737] Key type id_resolver registered
[ 1.948754] Key type id_legacy registered
[ 1.948820] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.949256] msgmni has been set to 490
[ 1.952133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.952160] io scheduler noop registered
[ 1.952176] io scheduler deadline registered
[ 1.952232] io scheduler cfq registered (default)
[ 1.956303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.958714] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.958997] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.619797] console [ttyO0] enabled
[ 2.624379] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.633040] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.641717] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.650324] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.659355] [drm] Initialized drm 1.1.0 20060810
[ 2.678018] brd: module loaded
[ 2.688319] loop: module loaded
[ 2.692543] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.702466] nand_get_flash_type: 2c,f1 against 2c,f1
[ 2.707988] ONFI param page 0 valid
[ 2.711661] ONFI flash detected
[ 2.714980] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[ 2.726891] omap2-nand: detected x8 NAND flash
[ 2.731556] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.737139] omap2-nand: using custom ecc layout
[ 2.741982] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.748376] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.754054] 0x000000000000-0x000000020000 : "spl"
[ 2.760874] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.768343] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.775732] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.783143] 0x000000080000-0x000000240000 : "u-boot"
[ 2.791354] 0x000000240000-0x000000260000 : "bootenv"
[ 2.798323] 0x000000260000-0x000000280000 : "fdt"
[ 2.804933] 0x000000280000-0x000000780000 : "kernel"
[ 2.815951] 0x000000800000-0x000001c00000 : "root"
[ 2.839418] 0x000001c00000-0x000003000000 : "config"
[ 2.863161] OneNAND driver initializing
[ 2.868901] usbcore: registered new interface driver asix
[ 2.874719] usbcore: registered new interface driver cdc_ether
[ 2.880964] usbcore: registered new interface driver smsc95xx
[ 2.887083] usbcore: registered new interface driver net1080
[ 2.893106] usbcore: registered new interface driver cdc_subset
[ 2.899400] usbcore: registered new interface driver zaurus
[ 2.905405] usbcore: registered new interface driver cdc_ncm
[ 2.912147] usbcore: registered new interface driver cdc_acm
[ 2.918107] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.926487] Initializing USB Mass Storage driver...
[ 2.931728] usbcore: registered new interface driver usb-storage
[ 2.938028] USB Mass Storage support registered.
[ 2.943068] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.949776] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.955018] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.963790] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.963811] musb-hdrc: MHDRC RTL version 2.0
[ 2.963826] musb-hdrc: setup fifo_mode 4
[ 2.963854] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.964002] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.969045] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.975058] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 2.980309] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.989079] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.989099] musb-hdrc: MHDRC RTL version 2.0
[ 2.989114] musb-hdrc: setup fifo_mode 4
[ 2.989135] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.989275] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 2.994318] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 2.999626] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.006251] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.014509] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.014614] usb usb1: default language 0x0409
[ 3.014672] usb usb1: udev 1, busnum 1, minor = 0
[ 3.014696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.021825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.029397] usb usb1: Product: MUSB HDRC host driver
[ 3.034612] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.040280] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.046276] usb usb1: usb_probe_device
[ 3.046304] usb usb1: configuration #1 chosen from 1 choice
[ 3.046370] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.046572] hub 1-0:1.0: usb_probe_interface
[ 3.046593] hub 1-0:1.0: usb_probe_interface - got id
[ 3.046621] hub 1-0:1.0: USB hub found
[ 3.050625] hub 1-0:1.0: 1 port detected
[ 3.054762] hub 1-0:1.0: standalone hub
[ 3.054782] hub 1-0:1.0: individual port power switching
[ 3.054800] hub 1-0:1.0: no over-current protection
[ 3.054817] hub 1-0:1.0: Single TT
[ 3.054838] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.054857] hub 1-0:1.0: power on to power good time: 10ms
[ 3.054913] hub 1-0:1.0: local power source is good
[ 3.055026] hub 1-0:1.0: enabling power on all ports
[ 3.056123] mousedev: PS/2 mouse device common for all mice
[ 3.064100] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.071593] 44e3e000.rtc: already running
[ 3.076096] i2c /dev entries driver
[ 3.081140] pps_ldisc: PPS line discipline registered
[ 3.086640] Driver for 1-wire Dallas network protocol.
[ 3.093888] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.101457] cpuidle: using governor ladder
[ 3.105787] cpuidle: using governor menu
[ 3.110390] of_get_named_gpio_flags exited with status 6
[ 3.110409] of_get_named_gpio_flags: can't parse gpios property
[ 3.110425] of_get_named_gpio_flags: can't parse gpios property
[ 3.110462] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.117685] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.124498] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.131716] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.139040] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.145993] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.155043] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.180889] of_get_named_gpio_flags exited with status -517
[ 3.180955] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.188740] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.195521] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.202712] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.210874] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.217166] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.224342] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.236592] usbcore: registered new interface driver usbhid
[ 3.242513] usbhid: USB HID core driver
[ 3.249413] TCP: cubic registered
[ 3.252937] Initializing XFRM netlink socket
[ 3.257507] NET: Registered protocol family 17
[ 3.262403] NET: Registered protocol family 15
[ 3.267252] Key type dns_resolver registered
[ 3.271884] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.279962] ThumbEE CPU extension supported.
[ 3.284474] Registering SWP/SWPB emulation handler
[ 3.290488] registered taskstats version 1
[ 3.297110] of_get_named_gpio_flags exited with status -517
[ 3.297181] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.354169] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.360619] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.375150] libphy: 4a101000.mdio: probed
[ 3.379505] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.389728] Detected MACID = 3c:a3:08:20:34:7b
[ 3.394416] cpsw 4a100000.ethernet: NAPI disabled
[ 3.399807] of_get_named_gpio_flags exited with status -517
[ 3.399873] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.408597] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.417879] cpu0 supply cpu0 not found, using dummy regulator
[ 3.424368] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.430187] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.442948] ALSA device list:
[ 3.446183] No soundcards found.
[ 3.450739] Freeing init memory: 264K
[ 3.454795] Failed to execute /init
[ 4.482229] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.769263] net eth0: initializing cpsw version 1.12 (0)
[ 5.778264] net eth0: phy found : id is : 0x7c0f1
[ 5.783657] libphy: PHY 4a101000.mdio:01 not found
[ 5.788853] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 8.856601] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 26 21:04:05 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Dec 26 21:04:05 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 26 21:04:05 (none) local0.warn cgminer[375]: bitmain_DASH_init
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:09 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:09 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:10 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:10 (none) local0.warn cgminer[375]: check_fan_speed OK
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
Dec 26 21:04:10 (none) local0.notice cgminer[375]: i2c init ok
Dec 26 21:04:10 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Dec 26 21:04:11 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:12 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:12 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:14 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:14 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:15 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:16 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:16 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:17 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:17 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Dec 26 21:04:18 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:19 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:20 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:21 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 26 21:04:21 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:22 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:22 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:23 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:24 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Dec 26 21:04:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Dec 26 21:04:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec 26 21:04:26 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Dec 26 21:04:26 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:26 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:26 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:26 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:26 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:26 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:27 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:29 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:30 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:31 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:31 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:32 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:32 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:34 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:35 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:36 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:36 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:37 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:37 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:39 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:39 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x176000f5 crc5 error,should be 0d,but check as 0f
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:40 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:41 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:41 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:41 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:42 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:42 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:42 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 26 21:04:42 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 26 21:04:42 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Dec 26 21:04:42 (none) local0.notice cgminer[375]: every_chain_get_PIC16F1704_freq_new
Dec 26 21:04:44 (none) local0.notice cgminer[375]: set_frequency: frequency = 537
Dec 26 21:04:44 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 26 21:04:44 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Dec 26 21:04:45 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 26 21:04:45 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Dec 26 21:04:46 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Dec 26 21:04:46 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec 26 21:04:47 (none) local0.notice cgminer[375]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: 0 calibration_sensor_offset_chain
Dec 26 21:04:47 (none) local0.notice cgminer[375]: chain:0 local:20 remote:23
Dec 26 21:04:47 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:47 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 26 21:04:48 (none) local0.notice cgminer[375]: chain:0 local:19 remote:20
Dec 26 21:04:48 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:48 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -4,
Dec 26 21:04:48 (none) local0.notice cgminer[375]: 1 calibration_sensor_offset_chain
Dec 26 21:04:48 (none) local0.notice cgminer[375]: chain:1 local:19 remote:22
Dec 26 21:04:48 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:49 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:49 (none) local0.notice cgminer[375]: chain:1 local:19 remote:19
Dec 26 21:04:49 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:49 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:49 (none) local0.notice cgminer[375]: 2 calibration_sensor_offset_chain
Dec 26 21:04:50 (none) local0.notice cgminer[375]: chain:2 local:0 remote:0
Dec 26 21:04:50 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -4,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:04:52 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:04:52 (none) local0.notice cgminer[375]: frequency = '537'
Dec 26 21:04:52 (none) local0.notice cgminer[375]: dev.timeout = 562356 us
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:55 (none) local0.err cgminer[375]: cgminer time error total_secs = 1514322295.954758 last_total_secs = 1.000000
Dec 26 21:05:02 (none) local0.warn cgminer[375]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
Dec 26 21:05:02 (none) local0.warn cgminer[375]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Dec 26 21:05:02 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (15)
Dec 26 21:06:56 (none) local0.notice cgminer[375]: chain 2 reinit 0.00
Dec 26 21:06:57 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:06:59 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Dec 26 21:06:59 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec 26 21:06:59 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: open device over
Dec 26 21:06:59 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Dec 26 21:06:59 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec 26 21:07:00 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:07:00 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:07:00 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Dec 26 21:07:00 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:07:01 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:07:01 (none) local0.notice cgminer[375]: open_core_chain
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015437] pid_max: default: 32768 minimum: 301
[ 0.015668] Security Framework initialized
[ 0.015764] Mount-cache hash table entries: 512
[ 0.024590] Initializing cgroup subsys cpuacct
[ 0.024621] Initializing cgroup subsys memory
[ 0.024684] Initializing cgroup subsys blkio
[ 0.024818] CPU: Testing write buffer coherency: ok
[ 0.025388] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025462] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026791] Brought up 1 CPUs
[ 0.026815] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028107] devtmpfs: initialized
[ 0.092454] pinctrl core: initialized pinctrl subsystem
[ 0.092668] rstctl core: initialized rstctl subsystem
[ 0.093159] regulator-dummy: no parameters
[ 0.093733] NET: Registered protocol family 16
[ 0.094437] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104118] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104303] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105398] platform 49000000.edma: alias fck already exists
[ 0.105431] platform 49000000.edma: alias fck already exists
[ 0.105459] platform 49000000.edma: alias fck already exists
[ 0.106612] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106794] OMAP GPIO hardware version 0.1
[ 0.108206] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109530] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110846] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111476] of_get_named_gpio_flags exited with status 52
[ 0.111508] gpio-rctrl rstctl.3: loaded OK
[ 0.116606] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119811] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.121998] cpsw.0: No hwaddr in dt. Using 3c:a3:08:20:34:7b from efuse
[ 0.122032] cpsw.1: No hwaddr in dt. Using 3c:a3:08:20:34:7d from efuse
[ 0.137576] bio: create slab
[ 0.149685] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.149926] of_get_named_gpio_flags: can't parse gpios property
[ 0.150218] vmmcsd_fixed: 3300 mV
[ 0.153330] SCSI subsystem initialized
[ 0.153780] usbcore: registered new interface driver usbfs
[ 0.153895] usbcore: registered new interface driver hub
[ 0.154231] usbcore: registered new device driver usb
[ 0.156339] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156373] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156567] media: Linux media interface: v0.10
[ 0.156664] Linux video capture interface: v2.00
[ 0.156779] pps_core: LinuxPPS API ver. 1 registered
[ 0.156795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.157513] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158696] Switching to clocksource gp_timer
[ 0.176705] NET: Registered protocol family 2
[ 0.177694] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177783] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177873] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.177964] TCP: reno registered
[ 0.177991] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178037] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178530] NET: Registered protocol family 1
[ 0.179118] RPC: Registered named UNIX socket transport module.
[ 0.179140] RPC: Registered udp transport module.
[ 0.179153] RPC: Registered tcp transport module.
[ 0.179167] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179558] Trying to unpack rootfs image as initramfs...
[ 1.941823] Freeing initrd memory: 12240K
[ 1.942548] CPU PMU: probing PMU on CPU 0
[ 1.942582] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.943120] omap2_mbox_probe: platform not supported
[ 1.947013] VFS: Disk quotas dquot_6.5.2
[ 1.947250] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.948645] NFS: Registering the id_resolver key type
[ 1.948737] Key type id_resolver registered
[ 1.948754] Key type id_legacy registered
[ 1.948820] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.949256] msgmni has been set to 490
[ 1.952133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.952160] io scheduler noop registered
[ 1.952176] io scheduler deadline registered
[ 1.952232] io scheduler cfq registered (default)
[ 1.956303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.958714] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.958997] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.619797] console [ttyO0] enabled
[ 2.624379] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.633040] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.641717] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.650324] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.659355] [drm] Initialized drm 1.1.0 20060810
[ 2.678018] brd: module loaded
[ 2.688319] loop: module loaded
[ 2.692543] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.702466] nand_get_flash_type: 2c,f1 against 2c,f1
[ 2.707988] ONFI param page 0 valid
[ 2.711661] ONFI flash detected
[ 2.714980] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[ 2.726891] omap2-nand: detected x8 NAND flash
[ 2.731556] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.737139] omap2-nand: using custom ecc layout
[ 2.741982] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.748376] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.754054] 0x000000000000-0x000000020000 : "spl"
[ 2.760874] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.768343] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.775732] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.783143] 0x000000080000-0x000000240000 : "u-boot"
[ 2.791354] 0x000000240000-0x000000260000 : "bootenv"
[ 2.798323] 0x000000260000-0x000000280000 : "fdt"
[ 2.804933] 0x000000280000-0x000000780000 : "kernel"
[ 2.815951] 0x000000800000-0x000001c00000 : "root"
[ 2.839418] 0x000001c00000-0x000003000000 : "config"
[ 2.863161] OneNAND driver initializing
[ 2.868901] usbcore: registered new interface driver asix
[ 2.874719] usbcore: registered new interface driver cdc_ether
[ 2.880964] usbcore: registered new interface driver smsc95xx
[ 2.887083] usbcore: registered new interface driver net1080
[ 2.893106] usbcore: registered new interface driver cdc_subset
[ 2.899400] usbcore: registered new interface driver zaurus
[ 2.905405] usbcore: registered new interface driver cdc_ncm
[ 2.912147] usbcore: registered new interface driver cdc_acm
[ 2.918107] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.926487] Initializing USB Mass Storage driver...
[ 2.931728] usbcore: registered new interface driver usb-storage
[ 2.938028] USB Mass Storage support registered.
[ 2.943068] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.949776] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.955018] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.963790] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.963811] musb-hdrc: MHDRC RTL version 2.0
[ 2.963826] musb-hdrc: setup fifo_mode 4
[ 2.963854] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.964002] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.969045] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.975058] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 2.980309] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.989079] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.989099] musb-hdrc: MHDRC RTL version 2.0
[ 2.989114] musb-hdrc: setup fifo_mode 4
[ 2.989135] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.989275] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 2.994318] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 2.999626] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.006251] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.014509] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.014614] usb usb1: default language 0x0409
[ 3.014672] usb usb1: udev 1, busnum 1, minor = 0
[ 3.014696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.021825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.029397] usb usb1: Product: MUSB HDRC host driver
[ 3.034612] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.040280] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.046276] usb usb1: usb_probe_device
[ 3.046304] usb usb1: configuration #1 chosen from 1 choice
[ 3.046370] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.046572] hub 1-0:1.0: usb_probe_interface
[ 3.046593] hub 1-0:1.0: usb_probe_interface - got id
[ 3.046621] hub 1-0:1.0: USB hub found
[ 3.050625] hub 1-0:1.0: 1 port detected
[ 3.054762] hub 1-0:1.0: standalone hub
[ 3.054782] hub 1-0:1.0: individual port power switching
[ 3.054800] hub 1-0:1.0: no over-current protection
[ 3.054817] hub 1-0:1.0: Single TT
[ 3.054838] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.054857] hub 1-0:1.0: power on to power good time: 10ms
[ 3.054913] hub 1-0:1.0: local power source is good
[ 3.055026] hub 1-0:1.0: enabling power on all ports
[ 3.056123] mousedev: PS/2 mouse device common for all mice
[ 3.064100] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.071593] 44e3e000.rtc: already running
[ 3.076096] i2c /dev entries driver
[ 3.081140] pps_ldisc: PPS line discipline registered
[ 3.086640] Driver for 1-wire Dallas network protocol.
[ 3.093888] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.101457] cpuidle: using governor ladder
[ 3.105787] cpuidle: using governor menu
[ 3.110390] of_get_named_gpio_flags exited with status 6
[ 3.110409] of_get_named_gpio_flags: can't parse gpios property
[ 3.110425] of_get_named_gpio_flags: can't parse gpios property
[ 3.110462] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.117685] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.124498] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.131716] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.139040] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.145993] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.155043] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.180889] of_get_named_gpio_flags exited with status -517
[ 3.180955] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.188740] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.195521] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.202712] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.210874] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.217166] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.224342] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.236592] usbcore: registered new interface driver usbhid
[ 3.242513] usbhid: USB HID core driver
[ 3.249413] TCP: cubic registered
[ 3.252937] Initializing XFRM netlink socket
[ 3.257507] NET: Registered protocol family 17
[ 3.262403] NET: Registered protocol family 15
[ 3.267252] Key type dns_resolver registered
[ 3.271884] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.279962] ThumbEE CPU extension supported.
[ 3.284474] Registering SWP/SWPB emulation handler
[ 3.290488] registered taskstats version 1
[ 3.297110] of_get_named_gpio_flags exited with status -517
[ 3.297181] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.354169] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.360619] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.375150] libphy: 4a101000.mdio: probed
[ 3.379505] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.389728] Detected MACID = 3c:a3:08:20:34:7b
[ 3.394416] cpsw 4a100000.ethernet: NAPI disabled
[ 3.399807] of_get_named_gpio_flags exited with status -517
[ 3.399873] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.408597] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.417879] cpu0 supply cpu0 not found, using dummy regulator
[ 3.424368] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.430187] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.442948] ALSA device list:
[ 3.446183] No soundcards found.
[ 3.450739] Freeing init memory: 264K
[ 3.454795] Failed to execute /init
[ 4.482229] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.769263] net eth0: initializing cpsw version 1.12 (0)
[ 5.778264] net eth0: phy found : id is : 0x7c0f1
[ 5.783657] libphy: PHY 4a101000.mdio:01 not found
[ 5.788853] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 8.856601] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 26 21:04:05 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Dec 26 21:04:05 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 26 21:04:05 (none) local0.warn cgminer[375]: bitmain_DASH_init
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:09 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:09 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:10 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:10 (none) local0.warn cgminer[375]: check_fan_speed OK
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
Dec 26 21:04:10 (none) local0.notice cgminer[375]: i2c init ok
Dec 26 21:04:10 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Dec 26 21:04:11 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:12 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:12 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:14 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:14 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:15 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:16 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:16 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:17 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:17 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Dec 26 21:04:18 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:19 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:20 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:21 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 26 21:04:21 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:22 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:22 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:23 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:24 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Dec 26 21:04:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Dec 26 21:04:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec 26 21:04:26 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Dec 26 21:04:26 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:26 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:26 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:26 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:26 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:26 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:27 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:29 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:30 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:31 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:31 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:32 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:32 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:34 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:35 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:36 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:36 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:37 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:37 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:39 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:39 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x176000f5 crc5 error,should be 0d,but check as 0f
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:40 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:41 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:41 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:41 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:42 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:42 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:42 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 26 21:04:42 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 26 21:04:42 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Dec 26 21:04:42 (none) local0.notice cgminer[375]: every_chain_get_PIC16F1704_freq_new
Dec 26 21:04:44 (none) local0.notice cgminer[375]: set_frequency: frequency = 537
Dec 26 21:04:44 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 26 21:04:44 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Dec 26 21:04:45 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 26 21:04:45 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Dec 26 21:04:46 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Dec 26 21:04:46 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec 26 21:04:47 (none) local0.notice cgminer[375]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: 0 calibration_sensor_offset_chain
Dec 26 21:04:47 (none) local0.notice cgminer[375]: chain:0 local:20 remote:23
Dec 26 21:04:47 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:47 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 26 21:04:48 (none) local0.notice cgminer[375]: chain:0 local:19 remote:20
Dec 26 21:04:48 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:48 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -4,
Dec 26 21:04:48 (none) local0.notice cgminer[375]: 1 calibration_sensor_offset_chain
Dec 26 21:04:48 (none) local0.notice cgminer[375]: chain:1 local:19 remote:22
Dec 26 21:04:48 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:49 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:49 (none) local0.notice cgminer[375]: chain:1 local:19 remote:19
Dec 26 21:04:49 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:49 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:49 (none) local0.notice cgminer[375]: 2 calibration_sensor_offset_chain
Dec 26 21:04:50 (none) local0.notice cgminer[375]: chain:2 local:0 remote:0
Dec 26 21:04:50 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -4,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:04:52 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:04:52 (none) local0.notice cgminer[375]: frequency = '537'
Dec 26 21:04:52 (none) local0.notice cgminer[375]: dev.timeout = 562356 us
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:55 (none) local0.err cgminer[375]: cgminer time error total_secs = 1514322295.954758 last_total_secs = 1.000000
Dec 26 21:05:02 (none) local0.warn cgminer[375]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
Dec 26 21:05:02 (none) local0.warn cgminer[375]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Dec 26 21:05:02 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (15)
Dec 26 21:06:56 (none) local0.notice cgminer[375]: chain 2 reinit 0.00
Dec 26 21:06:57 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:06:59 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Dec 26 21:06:59 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec 26 21:06:59 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: open device over
Dec 26 21:06:59 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Dec 26 21:06:59 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec 26 21:07:00 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:07:00 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:07:00 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Dec 26 21:07:00 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:07:01 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:07:01 (none) local0.notice cgminer[375]: open_core_chain
please fix my problem
Compared to stock firmware this is nothing but like a silencer to a gun. Thats the only difference here folks. When you can twist it to mine all x11 then let us know. Otherwise the dev fee is a free gift. Don't meant to be rude but when you have the source code. Its not off great difficulty to add or remove a few lines of code. Not knocking on this project, All i am saying is that when it comes to my build or my version of the antminer d3. Regular software from bitmanin and simple freq change does it here... Tested for two weeks. don't like to give my Hash power for free to the dev. Thanks, i am another who reverted.
bye
Compared to stock firmware this is nothing but like a silencer to a gun. Thats the only difference here folks. When you can twist it to mine all x11 then let us know. Otherwise the dev fee is a free gift. Don't meant to be rude but when you have the source code. Its not off great difficulty to add or remove a few lines of code. Not knocking on this project, All i am saying is that when it comes to my build or my version of the antminer d3. Regular software from bitmanin and simple freq change does it here... Tested for two weeks. don't like to give my Hash power for free to the dev. Thanks, i am another who reverted.
Scam
How you judge so quick thats scam?? give some explanation.
Recording of those settings looks legit I can say, it is connected to x13 pool also mining algo settings is under advanced tab and all highlights when moving cursor etc
Fans on 100% but temps are high probably due to heavy load of x13 connect over 21hours..
Why scam, only because asking for small donation?
For me common sense is as I see I believe, so how they was able to make that running software in this presentation??
Can't be..
You probably overlooked that little thing, clearly this is Russian guy
let me ask you this can you walk with your hands or eat with your legs?
legs designed for walking (mostly) and hands are designed for eating or jerking off
if it is so simple to change algos and maintain hashrate then why nobody changed s9 algos? emagine 13th hashrate on any other algo such profits will be ? can you imagine that?
i can give you figures in eth mining at 14th here is a link https://www.cryptocompare.com/mining/calculator/eth?HashingPower=14&HashingUnit=TH%2Fs&PowerConsumption=1400&CostPerkWh=0.1
1.17 mil/day that's awesome, so do you get why that is a scam?
if u dont ask him to get it work for ethereum or even dash i mean mine dash with s9 https://www.cryptocompare.com/mining/calculator/dash?HashingPower=14&HashingUnit=TH%2Fs&PowerConsumption=680&CostPerkWh=0not as good as ethereum with s9 but still he can do it surelly
P.S. i hope that everyone understand that i wrote it as sarcasm i'm not that stupid to believe it, as for you nid125 you can believe it i dont want to ruin your hopes
Im sorry Blissh I respect your tread and hard work for all of us but this guy just called my name so you understand..
Re last comment from @lashatatu
I never read something more stupid then your comment and ridicules example. I guess you jerking off during writing those nonsense.
What to expect from someone who joined btctalk just august this year...
Any way, of course you cannot expect miracle and use s9 to mine eth but we dont know 100 % that those bitmain fuckers didnt hide some possibilities in those d3.
You know that they did previously manage to create backdoors (read here: http://www.antbleed.com/) so ill be not surprised if they hide 2 more algos in those chips at least.
If you dont know whats the difference between x11 and x13 etc look below
Thanks, topic ended
i know i made redicules example but some people can walk with hand or eat with legs, but it's not be as effective
if anybody manages to switch algo it wont be as effective, actually not even near to 15gh more like 15mh or less but if even somebody manages to do it, so it's not worth it if it even possible The Baikal Miner X10 for example, started with X11/Quark/Qubit Algorythm
Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
and I believe that is more possible that we all know..
but think about, whoever find a way to mine diff algo will never be an idiot and share it/make it public. why? easy.. profit!
if all D3 users would jump on "new algo" the profit will destroy, no?
so we have to continue life^^ and buy other asics and do/hope the best
hm i dont think so, if all go to another algo, the difficulty of x11 will not rise as fast as before (or it go down, can the diff get down overall?)
but u are are right, life goes on and with my 2 d3's i get some extra money every month so im happy with that
and with the firmware of blissz i hope these 2 have a long lifetime, so thats ok to me
The Baikal Miner X10 for example, started with X11/Quark/Qubit Algorythm
Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
Since Release they also added Myriad-Groestl and Skein and they announcend that 2 more will come soon.
For the fact, that they used an ASIC Chip which is "only" designed for X11/Quark/Qubit, they added much more Algos.
I dont think that's impossible to add more algos to the D3, but if Bitmain will do that....
Scam
How you judge so quick thats scam?? give some explanation.
Recording of those settings looks legit I can say, it is connected to x13 pool also mining algo settings is under advanced tab and all highlights when moving cursor etc
Fans on 100% but temps are high probably due to heavy load of x13 connect over 21hours..
Why scam, only because asking for small donation?
For me common sense is as I see I believe, so how they was able to make that running software in this presentation??
Can't be..
You probably overlooked that little thing, clearly this is Russian guy
let me ask you this can you walk with your hands or eat with your legs?
legs designed for walking (mostly) and hands are designed for eating or jerking off
if it is so simple to change algos and maintain hashrate then why nobody changed s9 algos? emagine 13th hashrate on any other algo such profits will be ? can you imagine that?
i can give you figures in eth mining at 14th here is a link https://www.cryptocompare.com/mining/calculator/eth?HashingPower=14&HashingUnit=TH%2Fs&PowerConsumption=1400&CostPerkWh=0.1
1.17 mil/day that's awesome, so do you get why that is a scam?
if u dont ask him to get it work for ethereum or even dash i mean mine dash with s9 https://www.cryptocompare.com/mining/calculator/dash?HashingPower=14&HashingUnit=TH%2Fs&PowerConsumption=680&CostPerkWh=0not as good as ethereum with s9 but still he can do it surelly
P.S. i hope that everyone understand that i wrote it as sarcasm i'm not that stupid to believe it, as for you nid125 you can believe it i dont want to ruin your hopes
Im sorry Blissh I respect your tread and hard work for all of us but this guy just called my name so you understand..
Re last comment from @lashatatu
I never read something more stupid then your comment and ridicules example. I guess you jerking off during writing those nonsense.
What to expect from someone who joined btctalk just august this year...
Any way, of course you cannot expect miracle and use s9 to mine eth but we dont know 100 % that those bitmain fuckers didnt hide some possibilities in those d3.
You know that they did previously manage to create backdoors (read here: http://www.antbleed.com/) so ill be not surprised if they hide 2 more algos in those chips at least.
If you dont know whats the difference between x11 and x13 etc look below
Thanks, topic ended
Thanks Blissz! for this great firmware.
I have been mining for three weeks with my D3 on nicehash (awhh!), suprnova and poolmining.org, it worked great until early this week when i decided to switch to p2pool.
The every 2 hrs dev fee switching is causing p2pool to "re-provision" my D3 since they prefer the persist connection to the pool, which causing my predicted payout always be "no shares yet"
Is this normal behavior on p2pool? any advise from people here mining on p2pool with this firmware
many thanks,
- Khairil
I have been mining for three weeks with my D3 on nicehash (awhh!), suprnova and poolmining.org, it worked great until early this week when i decided to switch to p2pool.
The every 2 hrs dev fee switching is causing p2pool to "re-provision" my D3 since they prefer the persist connection to the pool, which causing my predicted payout always be "no shares yet"
Is this normal behavior on p2pool? any advise from people here mining on p2pool with this firmware
many thanks,
- Khairil
I second that. I like p2p for long term nice payouts sometimes too...
Thanks Blissz! for this great firmware.
I have been mining for three weeks with my D3 on nicehash (awhh!), suprnova and poolmining.org, it worked great until early this week when i decided to switch to p2pool.
The every 2 hrs dev fee switching is causing p2pool to "re-provision" my D3 since they prefer the persist connection to the pool, which causing my predicted payout always be "no shares yet"
Is this normal behavior on p2pool? any advise from people here mining on p2pool with this firmware
many thanks,
- Khairil
I have been mining for three weeks with my D3 on nicehash (awhh!), suprnova and poolmining.org, it worked great until early this week when i decided to switch to p2pool.
The every 2 hrs dev fee switching is causing p2pool to "re-provision" my D3 since they prefer the persist connection to the pool, which causing my predicted payout always be "no shares yet"
Is this normal behavior on p2pool? any advise from people here mining on p2pool with this firmware
many thanks,
- Khairil
I already upgrade all my d3 for batch 1 and 2 and it was good result for me..
because my country a bit hotter.. so i just keep at 20ghs below..
thank again for your great job dev.. hope the new recommend fw will coming soon
because my country a bit hotter.. so i just keep at 20ghs below..
thank again for your great job dev.. hope the new recommend fw will coming soon
Jump to: