Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 21. (Read 125923 times)
I mining with this modded firmware and I try to setup 600M with 18 Voltage (for other 3 chains setup is Use Global) but HW getting worst for me. I have APW3++ 1600 W Psu with 220v. So what I missing?
bliss sugesstion,
Can you mine the dev fee after the first 30 minutes not at the first 2 minutes the machine running ?
The reason is when we are going for manual tunning to find the sweat spot.. I tend to leave 10-20 minutes of the machine running to see the HW error..
and start to change the clock or voltage and every time the machine restart it mines your dev pool..at the first 3minutes, I dont wanna be stingy but come one atleast give us proper tune then you can have your fee. Sounds fair right ?
I hope you can tweak it.. in v 1.13.
Maybe this is the reason for upper guys blame you.
Thanks
Can you mine the dev fee after the first 30 minutes not at the first 2 minutes the machine running ?
The reason is when we are going for manual tunning to find the sweat spot.. I tend to leave 10-20 minutes of the machine running to see the HW error..
and start to change the clock or voltage and every time the machine restart it mines your dev pool..at the first 3minutes, I dont wanna be stingy but come one atleast give us proper tune then you can have your fee. Sounds fair right ?
I hope you can tweak it.. in v 1.13.
Maybe this is the reason for upper guys blame you.
Thanks
Hello dear miners,
Im looking everywhere to try to download the beta version with the auto tune feature, but can't find it anywhere
Any help with that ?
have a good day all
Im looking everywhere to try to download the beta version with the auto tune feature, but can't find it anywhere
Any help with that ?
have a good day all
@Blissz Consider using different names for the images in your interface so this cache issue goes away...
Thanks!
he is not longer here 
just a dog who barked loud and ran away, thats the internet
Yeah, troll or just an idiot. Only point of replying is so other people that stop by have the right information. just a dog who barked loud and ran away, thats the internet
I’m sure this was said earlier and I may have just missed it, and maybe even discussed at length elsewhere, but I challenge the use of “ May” as in “use of this firmware may void your warranty”.
It should be simply stated that use of this firmware voids your warranty.
Are people sending back individual boards for repair, and are able to not talk abou the firmware change, or are people reverting back to stock before their RMA claims and Bitmain can’t detect that the MHz had been changed (or the that the firmware had be rewritten?) Or am I way off and the people that use this firmware just accept the loss of failed hardware replacement rights when their hardware inevitably fails, because this firmware is so advantageous? Thanks.
1. Bitmain say when you overclock you loose your warranty, so reduce the frequency is not the Problem.It should be simply stated that use of this firmware voids your warranty.
Are people sending back individual boards for repair, and are able to not talk abou the firmware change, or are people reverting back to stock before their RMA claims and Bitmain can’t detect that the MHz had been changed (or the that the firmware had be rewritten?) Or am I way off and the people that use this firmware just accept the loss of failed hardware replacement rights when their hardware inevitably fails, because this firmware is so advantageous? Thanks.
2. When you change the Firmware you loose the warrenty, but the Firmware is on the Controller board not on the hashboards. and I think when you change back to the Orig. Firmware Bitmain can not see that you have change it before.
When you change back to original firmware the old firmware has changed the Bitmain logo and Bitmain will know that someone tried to modify the firmware! On a sidenote, the warranty is ony 180 days from Bitmain, so until that period expires, well its up to you! But this firmware is a REAL HACK, it installed 2 new pools you do not see in the miner profile!
EVEN A FACTORY RESET WILL NOT REMOVE SOME PARTS OF THE BLISSZ FIRMWARE! - WARNING! DO NOT INSTALL
You don't understand how dev fee works, and you clearly didn't read post 1 or anything in this thread. Who are you warning, people even more lost than you?
@Blissz Consider using different names for the images in your interface so this cache issue goes away...
he is not longer here
just a dog who barked loud and ran away, thats the internet
just a dog who barked loud and ran away, thats the internet
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Someone is laughing alway the way to the bank! Kudos to the Dev who came up with this scheme! I always knew you can hide pools past the profile in the miner config and use them to mine your own pools! You actually have done it and these suckers defend you! kudos once again!
again stop crying, ssh your device and edit your host file, and you'll be fine
You missed the point, not everyone knows how to ssh the host files! and the priority can be changed! Enough said! Someone else will detect it also in time! Time cures all! Cheers! I stopped following this post! No need to rant!
so you said:"BEWARE unless this developer comes clean I would not recommend using this firmware!"
he came clean about this from first post, so what is the problem again?
or do you want to say something else and change you statement with something more drastic? BEGONE IDIOT! I’m sure this was said earlier and I may have just missed it, and maybe even discussed at length elsewhere, but I challenge the use of “ May” as in “use of this firmware may void your warranty”.
It should be simply stated that use of this firmware voids your warranty.
Are people sending back individual boards for repair, and are able to not talk abou the firmware change, or are people reverting back to stock before their RMA claims and Bitmain can’t detect that the MHz had been changed (or the that the firmware had be rewritten?) Or am I way off and the people that use this firmware just accept the loss of failed hardware replacement rights when their hardware inevitably fails, because this firmware is so advantageous? Thanks.
1. Bitmain say when you overclock you loose your warranty, so reduce the frequency is not the Problem.It should be simply stated that use of this firmware voids your warranty.
Are people sending back individual boards for repair, and are able to not talk abou the firmware change, or are people reverting back to stock before their RMA claims and Bitmain can’t detect that the MHz had been changed (or the that the firmware had be rewritten?) Or am I way off and the people that use this firmware just accept the loss of failed hardware replacement rights when their hardware inevitably fails, because this firmware is so advantageous? Thanks.
2. When you change the Firmware you loose the warrenty, but the Firmware is on the Controller board not on the hashboards. and I think when you change back to the Orig. Firmware Bitmain can not see that you have change it before.
When you change back to original firmware the old firmware has changed the Bitmain logo and Bitmain will know that someone tried to modify the firmware! On a sidenote, the warranty is ony 180 days from Bitmain, so until that period expires, well its up to you! But this firmware is a REAL HACK, it installed 2 new pools you do not see in the miner profile!
EVEN A FACTORY RESET WILL NOT REMOVE SOME PARTS OF THE BLISSZ FIRMWARE! - WARNING! DO NOT INSTALL
1. a lot people told you, we know all about the devpool, and he mine every 2 hours less then 2min (1.5%)
in the beginning the devpools was in the poollist, when you use Awesome Miner or other pool Managment Software you can see them, in the last Beta it´s inside, again.
2. When you flash back to Orig. Firmware all data in the Controller get to Orig. state, the Blissz Logo you see only, because you are to stupid to delete your browser cache.
When you read only the 1 post of the software, you can read, that there is a devpool so don´t say it´s hidden or secret, you can see it in the logs from the Miner so it´s not hidden.
Bye and good luck
@Friday13
I don´t understand him, too
just reported....
cant understand the porblem of this guy, maybe an other angry developer?
cant understand the porblem of this guy, maybe an other angry developer?
nice thanks
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Someone is laughing alway the way to the bank! Kudos to the Dev who came up with this scheme! I always knew you can hide pools past the profile in the miner config and use them to mine your own pools! You actually have done it and these suckers defend you! kudos once again!
again stop crying, ssh your device and edit your host file, and you'll be fine
You missed the point, not everyone knows how to ssh the host files! and the priority can be changed! Enough said! Someone else will detect it also in time! Time cures all! Cheers! I stopped following this post! No need to rant!
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Someone is laughing alway the way to the bank! Kudos to the Dev who came up with this scheme! I always knew you can hide pools past the profile in the miner config and use them to mine your own pools! You actually have done it and these suckers defend you! kudos once again!
again stop crying, ssh your device and edit your host file, and you'll be fine
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Using hidden pools to mine off your machines, is not a dev tool, how moronic can any be?
to mine off
read the last sites and understand how and when the dev pools mine.
when the dev dont hardcode the pools, everything can take them out and the dev gets nothing for his work.
(sarcasm on) and wow, its so much the dev get from me, im not able to mine some profit for me (sarcasm out)
I warned you! I did my part! Its coffee time! Kudos to the Dev, I use the same concepts, but I do not sucker people into mining my pools! Again Kudos to you! HAVE A NICE LIFE SUCKERS! -
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Someone is laughing alway the way to the bank! Kudos to the Dev who came up with this scheme! I always knew you can hide pools past the profile in the miner config and use them to mine your own pools! You actually have done it and these suckers defend you! kudos once again!
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
lol, go read from page 1 hahaha
Enlighten us! O mighty grant Boba!
Stop crying man, read the full thread and you will see that we all know that there are dev fees.
Blissz is doing a great job so don't FUD his work.
At least using his firmware you can save some power cost even if there are small dev fee each days... those dev fees are nothing in regards power saving and efficiency of the device when you take time to perfect your miner advanced configuration.
My device now works like nothing compare to the original firmware.
So yes, I pay dev fees, even if I know how to block them (firewall, dns, ...)
@Blissz, your last unstable release is good and the autotune gave me some good input to manualy set values that my device can handle.
Thanks again and keep up your good work.
Regards
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Using hidden pools to mine off your machines, is not a dev tool, how moronic can any be?
to mine off
read the last sites and understand how and when the dev pools mine.
when the dev dont hardcode the pools, everything can take them out and the dev gets nothing for his work.
(sarcasm on) and wow, its so much the dev get from me, im not able to mine some profit for me (sarcasm out)
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
wow, do u have read anything in the sites before??
its not a hack, its the dev pool
when u install the beta version you also can see them...
if u dont want to support the dev, then go back to stock firmware!
Using hidden pools to mine off your machines, is not a dev tool, how moronic can anyone be? So let me get this I will give you a firmware that takes over your miner to mine on my pool and my accounts and you will call it what? development? Its your machine! a sucker born every minute? PT Barnum may have been correct
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
lol, go read from page 1 hahaha
Enlighten us! O mighty grant Boba!
I have tested this firmware and its a HACK, WARNING! it installed 2 new pools that you do not see in the setup, and they prioritize mining even though you get some blocks the hidden pools receive the most, I tried to disable them, but the firmware will not allow it!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
pools used are -> suprnova:9991 and dash-eu.coinmine.pl:6099
BEWARE unless this developer comes clean I would not recommend using this firmware!
lol, go read from page 1 hahaha
Jump to: