What is the maximum hashrate you can achieve with stability on a 19.3 model? My aim is for maximum hashrate and not efficiency, but don't want to risk burning a board since its working full time. Temps are stable now at 70c with 19.3.
Just want to know if its worth putting this firmware and overclock, as from what i see is more foccused in efficiency
Thanks
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 62. (Read 125911 times)
Hi!
I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.
Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.
I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!
I'm begining to enter in panic! Could somebody help me with that? What should I do?
I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.
By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.
Thanks in advance.
I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.
Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.
I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!
I'm begining to enter in panic! Could somebody help me with that? What should I do?
I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.
By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.
Thanks in advance.
BLISSZ .....
Can you please help us....
There are many more who did this....;(
Please give us a hand...
Bitmain sent me a replacement control board for free. Even thought I said it was my mistake and put the wrong firmware on it. From opening of ticket to delivery it was 7 days to the UK. Not bad shame the rest of the business couldn't be that smooth
Hi!
I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.
Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.
I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!
I'm begining to enter in panic! Could somebody help me with that? What should I do?
I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.
By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.
Thanks in advance.
I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.
Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.
I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!
I'm begining to enter in panic! Could somebody help me with that? What should I do?
I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.
By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.
Thanks in advance.
BLISSZ .....
Can you please help us....
There are many more who did this....;(
Please give us a hand...
Maybe I have set diff level too high, I have been trying d=32000.
Where I can change this value?
Hi, in the password field you just add d=40 for a diff of 40.
So mine is c=DASH,d=80 in the password field.
This is for zpool.ca, other pools may do it in a different way.
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
around 1250W
Are you sure? Mine is October batch (19_3 model) and factory settings it was at 17GH/s and 1050w. Now I've tweaked it to 20GH/s at 1100w
wich settings do you use for the 20GH/s at 1100W?
@blissz i have seen when the first pool is down it stucks on the dev fee pool!
is it maybe possible to push a little bit the Auto fan performance settings to a little bit higher rpm? (it would be nice a little bit more power)
great job blissz!
20GH at 1100 watts is impressive is this with factory firmware ?
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
around 1250W
Are you sure? Mine is October batch (19_3 model) and factory settings it was at 17GH/s and 1050w. Now I've tweaked it to 20GH/s at 1100w
wich settings do you use for the 20GH/s at 1100W?
@blissz i have seen when the first pool is down it stucks on the dev fee pool!
is it maybe possible to push a little bit the Auto fan performance settings to a little bit higher rpm? (it would be nice a little bit more power)
and i have not always the same GH/s on every startup (it changes around 1Gh/s) sometimes i have 18ghs and sometimes 19ghs/s with the same settings (always the same power consumtion) has anyone the same result?
great job blissz!
Hi blissz,
the "Automatic Reboot on low hashrate or high ASIC fail" is restarting my D3 every 60 minutes.
It is possible to create a logfile over more times as 1 reboot?
The kernel log is without every error messages.
the "Automatic Reboot on low hashrate or high ASIC fail" is restarting my D3 every 60 minutes.
It is possible to create a logfile over more times as 1 reboot?
The kernel log is without every error messages.
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
I have mine running at 16.5gh at about ~875W
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
around 1250W
Are you sure? Mine is October batch (19_3 model) and factory settings it was at 17GH/s and 1050w. Now I've tweaked it to 20GH/s at 1100w
Thanks, at lowest value of 400 what is the hash rate and the power consumption for 19.3 (Nov.batch) model?
Thanks W_M
Thanks W_M
If you're running Blissz firmware at 400 and lowest voltage setting then ~700w (at least that's what I'm getting) will only be 15GH/s though.
Thanks, at lowest value of 400 what is the hash rate and the power consumption for 19.3 (Nov.batch) model?
Thanks W_M
Thanks W_M
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
around 1250W
with original firmware i got on frequency 506 around 1100 - 1150W and its 16-17GH, so must be less then 1100W, but you can never say exact all miners are different.
Congratulations @blissz,
The version 29/11 seems really stable already. Running for hours now, 462MHz on all boards with power settings to 8. No significant HW errors for now. Lower voltage settings result in higher HW errors - this is what I found out so far... Fans running at 25% (manual mode), still the original ones - temps are always below 80°C.
I now tried your newest version to medicate my other D3, this one has a Chain#1 problem and sometimes sees only 55 of 60 asics, sometimes it doesn't start at all. Your new FW is not changing this behavior instantly but I was able to bring Chain#1 back into 60 asics and 0HW errors by gently overpowering chain#1.
So this D3 runs like:
Chain#1: 400MHz, Power: 15
Chain#2: 462MHz, Power: 9
Chain#3: 462MHz, Power: 9
This setup is stable for now and I really appreciate your work, because with default bitmain fw those custom treatment wouldn't be possible at all. This makes this D3 hashing at almost 17GH/s while fans stay below 3000rpm.
After dealing with 3 D3, all machines turned out to be really different. So I wouldn't recommend any precise configurations because everyone needs to find out how his miner is doing best. And it seems that bitmain has a lot of fluctuations in there production line - otherwise we wouldn't see those big differences here...
The version 29/11 seems really stable already. Running for hours now, 462MHz on all boards with power settings to 8. No significant HW errors for now. Lower voltage settings result in higher HW errors - this is what I found out so far... Fans running at 25% (manual mode), still the original ones - temps are always below 80°C.
I now tried your newest version to medicate my other D3, this one has a Chain#1 problem and sometimes sees only 55 of 60 asics, sometimes it doesn't start at all. Your new FW is not changing this behavior instantly but I was able to bring Chain#1 back into 60 asics and 0HW errors by gently overpowering chain#1.
So this D3 runs like:
Chain#1: 400MHz, Power: 15
Chain#2: 462MHz, Power: 9
Chain#3: 462MHz, Power: 9
This setup is stable for now and I really appreciate your work, because with default bitmain fw those custom treatment wouldn't be possible at all. This makes this D3 hashing at almost 17GH/s while fans stay below 3000rpm.
After dealing with 3 D3, all machines turned out to be really different. So I wouldn't recommend any precise configurations because everyone needs to find out how his miner is doing best. And it seems that bitmain has a lot of fluctuations in there production line - otherwise we wouldn't see those big differences here...
always CHAIN 1 issue !!!!
help !!! need latest firmware to fix CHAIN 1 high temp
Thanks for sharing this. I tried these settings but had issues with CHain #1 as well. I kept it at 462MHZ and power to 10. Temp dropped down to 37
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
around 1250W
Hi, what is the power consumption of 19.3 Model (Nov.batch) at 15Ghs hashrate?
Cheers W_M
Cheers W_M
Maybe I have set diff level too high, I have been trying d=32000.
Where I can change this value?
Hi!
I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.
Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.
I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!
I'm begining to enter in panic! Could somebody help me with that? What should I do?
I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.
By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.
Thanks in advance.
I installed Blissz firmware in my d3's and I made a mistake copying the cgminer archive from /usr/bin from one of the d3 to an l3+ I have too.
Of course it started up in the l3+ with the --scrypt param but it didn't mine anything.
I flashed my l3+ to stock again but now it doesn't recognize any of the chains on my l3+!
I'm begining to enter in panic! Could somebody help me with that? What should I do?
I think is because some additional files created or some script running in parallel with cgminer. I don't know really but that file is the only I changed "trying to not touch the filesystem" :S.
By the way, Is there any plan to make a firmware for l3's? It would be nice! on d3's are running amazing.
Thanks in advance.
Hello Blissz,
I have D3 17.5Ghs batch Sep.
Can I use your Fw for this D3?
Thank you in advance!
BR,
I have D3 17.5Ghs batch Sep.
Can I use your Fw for this D3?
Thank you in advance!
BR,
I tried the latest beta version on my Nov 21-30th batch, I like it. The chain 1 temperature didn't goes to over 100 on 1st reboot. Normally, other version of your firmware would take a few reboot to get a temperature below 100 usually or lower HW error rate. Restart only happen once for very long time (My L3+ runs few weeks without issue). Slow restart and getting all device into proper state is more important.
Thanks,
Thanks,
I was looking into that one (Scythe Slip Stream 1900) but it has 3-pin connector not 4-pin pwn , so am not sure it will work on miner.
Thought this was an interesting table for those thinking about changing fans.
https://www.quietpc.com/120mmfans
Lists, RPM, dB, airflow, price etc.
E.g. the Scythe Slip Stream 1900 is the second cheapest, best airflow, and not bad acoustic rating.
Think this is what @blissz has? Think I will get some and try them out. Don't look massively amazing from photos though!
https://www.quietpc.com/120mmfans
Lists, RPM, dB, airflow, price etc.
E.g. the Scythe Slip Stream 1900 is the second cheapest, best airflow, and not bad acoustic rating.
Think this is what @blissz has? Think I will get some and try them out. Don't look massively amazing from photos though!
just a thought about any kind of mod for the D3... with what Blissz did already lets you lower the noise and power draw... and the cost of just one of those fans would be 2-3 DAYS of the D3 mining or 7-15 DAYS if you include electric cost. I wouldn't be looking to spend any extra money on the D3 unless it is able to become profitable again. A fan isn't going to make this unit make you your money back.
Jump to: