Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 75. (Read 125911 times)

Yes, last bersion, how do I see full log? It's still there if I rebooted?

You're on the 26/11 version? Can you post your full kernel log. Thanks

Not really, or not as intended.

That's what I saw already 2 times since flashing last version.
And, yes, option to restart on low HR is enabled

Yes it works

Nov 27 08:11:16 (none) local0.err cgminer[29544]: create rx read thread for /dev/ttyO1 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: Start A New Asic Response.Chain Id:[0]
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create tx read thread for /dev/ttyO1 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: tty_init chainid = 1
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create rx read thread for /dev/ttyO2 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: Start A New Asic Response.Chain Id:[1]
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create tx read thread for /dev/ttyO2 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: tty_init chainid = 2
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create rx read thread for /dev/ttyO4 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: Start A New Asic Response.Chain Id:[2]
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create tx read thread for /dev/ttyO4 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: open device over
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:16 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:16 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:17 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:17 (none) local0.notice cgminer[29544]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 08:11:18 (none) local0.notice cgminer[29544]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 08:11:18 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: reset_all_hash_board
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:19 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:19 (none) local0.err cgminer[29544]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 541
Nov 27 08:11:19 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:19 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 541
Nov 27 08:11:19 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 542
Nov 27 08:11:20 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:20 (none) local0.notice cgminer[29544]: recheck_asic_num DONE!
Nov 27 08:11:20 (none) local0.notice cgminer[29544]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: reset_all_hash_board
Nov 27 08:11:22 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:22 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:22 (none) local0.err cgminer[29544]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1082
Nov 27 08:11:22 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:22 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1083
Nov 27 08:11:22 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1084
Nov 27 08:11:22 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:22 (none) local0.notice cgminer[29544]: recheck_asic_num DONE!
Nov 27 08:11:22 (none) local0.notice cgminer[29544]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: reset_all_hash_board
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 2
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 3
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 4
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 5
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 6
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 7
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 8
Nov 27 08:11:24 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1623
Nov 27 08:11:25 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:25 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1625
Nov 27 08:11:25 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1626
Nov 27 08:11:25 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: recheck_asic_num DONE!
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: set_ticket_mask ticket_mask = 0x0000001d
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: every_chain_get_PIC16F1704_freq_new
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 106
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 537
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 537
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 537
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: software_set_address: chain 0 has 0 ASIC, and addrInterval is 1
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: Now Set

• Chain Address

Nov 27 08:11:27 (none) local0.notice cgminer[29544]: software_set_address: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: Now Set [1] Chain Address
Nov 27 08:11:28 (none) local0.notice cgminer[29544]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Nov 27 08:11:28 (none) local0.notice cgminer[29544]: Now Set [2] Chain Address
Nov 27 08:11:29 (none) local0.notice cgminer[29544]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 08:11:29 (none) local0.notice cgminer[29544]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Nov 27 08:11:29 (none) local0.notice cgminer[29544]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 08:11:30 (none) local0.warn cgminer[29544]: set_temperature_offset_value
Nov 27 08:11:31 (none) local0.notice cgminer[29544]: set_temperature_offset_value: Chain0 Sensor0 temp offset : 00,
Nov 27 08:11:31 (none) local0.notice cgminer[29544]: set_temperature_offset_value: Chain1 Sensor0 temp offset : 03,
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: set_temperature_offset_value: Chain2 Sensor0 temp offset : 01,
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: frequency = '537'
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: dev.timeout = 562356 us
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: open_core
Nov 27 08:11:35 (none) local0.err cgminer[29544]: low hashrate detection trigger: 1111.728000 Gh/s
Nov 27 08:11:35 (none) local0.notice cgminer[29544]: set voltage = 1326.681400  real:155 mv
Nov 27 08:11:35 (none) local0.notice cgminer[29544]: set_PIC16F1704_voltage_new ok, voltage = 0x37
Nov 27 08:11:35 (none) local0.notice cgminer[29544]: set_PIC16F1704_voltage_new ok, voltage = 0x9b
Nov 27 08:11:36 (none) local0.notice cgminer[29544]: set_PIC16F1704_voltage_new ok, voltage = 0x9b
Nov 27 08:11:36 (none) local0.err cgminer[29544]: cgminer time error total_secs = 1511770296.432706 last_total_secs = 1.000000
Nov 27 08:11:37 (none) local0.err cgminer[29544]: D1 0: work 7f not find error
Nov 27 08:11:42 (none) local0.warn cgminer[29544]: API running in IP access mode on port 4028 (18)
Nov 27 08:12:01 (none) local0.warn cgminer[29544]: Pool 2 stratum+tcp://stratum-dash.antpool.com:25 alive, testing stability
Nov 27 08:12:01 (none) local0.warn cgminer[29544]: Switching to pool 2 stratum+tcp://stratum-dash.antpool.com:25
Nov 27 08:12:02 (none) local0.warn cgminer[29544]: Pool 1 stratum+tcp://stratum-dash.antpool.com:443 alive, testing stability
Nov 27 08:12:02 (none) local0.warn cgminer[29544]: Switching to pool 1 stratum+tcp://stratum-dash.antpool.com:443
Nov 27 08:13:04 (none) local0.warn cgminer[29544]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9995
Nov 27 08:15:07 (none) local0.warn cgminer[29544]: Pool 1 stratum+tcp://stratum-dash.antpool.com:443 stable for 5 mins
Nov 27 08:15:07 (none) local0.warn cgminer[29544]: Switching to pool 1 stratum+tcp://stratum-dash.antpool.com:443
Nov 27 08:15:17 (none) local0.warn cgminer[29544]: Waiting for work to be available from pools.
Nov 27 08:15:27 (none) local0.warn cgminer[29544]: Work available from pools, resuming.

Increase the voltage of chain 1
Power off for a minute and power on again
If that won't work. Flash the stock fw and let me know if that works. If yes  I need to have a look at it

Nov 27 08:04:48 (none) local0.notice cgminer[376]: check_every_chain_asic_number
Nov 27 08:04:48 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:04:48 (none) local0.err cgminer[376]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1626
Nov 27 08:04:48 (none) local0.err cgminer[376]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1627
Nov 27 08:04:49 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1631
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1632
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1633
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1634
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1635
Nov 27 08:04:49 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:04:49 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
Nov 27 08:04:49 (none) local0.notice cgminer[376]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 08:04:49 (none) local0.notice cgminer[376]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 08:04:49 (none) local0.notice cgminer[376]: set_ticket_mask ticket_mask = 0x0000001d
Nov 27 08:04:49 (none) local0.notice cgminer[376]: every_chain_get_PIC16F1704_freq_new
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: software_set_address: chain 0 has 0 ASIC, and addrInterval is 1
Nov 27 08:04:51 (none) local0.notice cgminer[376]: Now Set

• Chain Address

Nov 27 08:04:51 (none) local0.notice cgminer[376]: software_set_address: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 08:04:51 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
Nov 27 08:04:52 (none) local0.notice cgminer[376]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Nov 27 08:04:52 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Nov 27 08:04:53 (none) local0.notice cgminer[376]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 08:04:53 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Nov 27 08:04:53 (none) local0.notice cgminer[376]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 08:04:54 (none) local0.warn cgminer[376]: set_temperature_offset_value
Nov 27 08:04:55 (none) local0.notice cgminer[376]: set_temperature_offset_value: Chain0 Sensor0 temp offset : 00,
Nov 27 08:04:55 (none) local0.notice cgminer[376]: set_temperature_offset_value: Chain1 Sensor0 temp offset : -2,
Nov 27 08:04:56 (none) local0.notice cgminer[376]: set_temperature_offset_value: Chain2 Sensor0 temp offset : -9,
Nov 27 08:04:56 (none) local0.notice cgminer[376]: frequency = '537'
Nov 27 08:04:56 (none) local0.notice cgminer[376]: dev.timeout = 562356 us
Nov 27 08:04:56 (none) local0.notice cgminer[376]: open_core
Nov 27 08:04:59 (none) local0.err cgminer[376]: low hashrate detection trigger: 0.000000 Gh/s
Nov 27 08:04:59 (none) local0.notice cgminer[376]: set voltage = 513.491208  real:600 mv
Nov 27 08:04:59 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0x58
Nov 27 08:04:59 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0x58
Nov 27 08:05:00 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0x58
Nov 27 08:05:00 (none) local0.err cgminer[376]: cgminer time error total_secs = 1511769900.381811 last_total_secs = 1.000000
Nov 27 08:05:01 (none) local0.err cgminer[376]: D1 0: work 7f not find error

Increase the voltage of chain 1
Power off for a minute and power on again
If that won't work. Flash the stock fw and let me know if that works. If yes  I need to have a look at it

Nov 27 07:56:01 (none) local0.notice cgminer[17252]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 07:56:01 (none) local0.notice cgminer[17252]: Now Set

• Chain Address

Nov 27 07:56:01 (none) local0.notice cgminer[17252]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 07:56:01 (none) local0.notice cgminer[17252]: Now Set [1] Chain Address
Nov 27 07:56:02 (none) local0.notice cgminer[17252]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1

Nov 27 07:58:15 (none) local0.notice cgminer[17252]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 07:58:15 (none) local0.notice cgminer[17252]: Now Set

• Chain Address

Nov 27 07:58:16 (none) local0.notice cgminer[17252]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 07:58:16 (none) local0.notice cgminer[17252]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 07:58:16 (none) local0.warn cgminer[17252]: Chain 0 set_temperature_offset_value_chain
Nov 27 07:58:16 (none) local0.warn cgminer[17252]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 07:58:17 (none) local0.notice cgminer[17252]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 07:58:17 (none) local0.notice cgminer[17252]: open_core_chain

1   54   537   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   537   6466.17   0   33   47   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   537   6334.65   29   33   48   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo

guys after update one chain hide how to resolved this problem ?

Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
2
60
537
5374.35
0
27
47
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3
60
537
4868.28
0
27
47
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
Fan#   Fan1   Fan2
Speed (r/min)   2,970   4,260                  



i reset shitch off and start .. nothing help .. how to get bac chain 1 ?

with the new firmware I have it set to 437M / lowest on one and 437M / 4 on the second ... the first one showed only 3 HW errors in the last 20 hours and 0 on the second. At a steady 16.25GH using only ~850W... while the overall income is lower the profit is higher this way. well worth the 1.5% dev... So far it is working great but I found one issue... I use Awesome Miner to monitor and manage my Antminers and when I try to change the pools in there your pools always move up in the list. In the program I can see all five pools and even add more if I want but when I try to move my first three pools around it moves your up. It would be great if I could get this to work with Awesome Miner as it is a great way to move pools around. It is much easier than trying to log in to each miner to change the pool orders. I guess the feature that someone posted about pool profiles to allow for quick changes would be a good fix as well.

Hey Blissz, is the feature "Automatic reboot on low hashrate detection" working on your latest FW?

Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain chainid = 1
Nov 27 07:31:58 (none) local0.err cgminer[382]: create rx read thread for chain 1 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: Start A New Asic Response.Chain Id:[1]
Nov 27 07:31:58 (none) local0.err cgminer[382]: create tx read thread for chain 1 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: open device over
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain chainid = 2
Nov 27 07:31:58 (none) local0.err cgminer[382]: create rx read thread for chain 2 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: Start A New Asic Response.Chain Id:[2]
Nov 27 07:31:58 (none) local0.err cgminer[382]: create tx read thread for chain 2 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: open device over
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain chainid = 3
Nov 27 07:31:58 (none) local0.err cgminer[382]: create rx read thread for chain 3 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: Start A New Asic Response.Chain Id:[3]
Nov 27 07:31:59 (none) local0.err cgminer[382]: create tx read thread for chain 3 ok
Nov 27 07:31:59 (none) local0.notice cgminer[382]: open device over
Nov 27 07:31:59 (none) local0.notice cgminer[382]: check_every_chain_asic_number
Nov 27 07:31:59 (none) local0.warn cgminer[382]: check_asic_reg: Chain1 has 0 ASICs
Nov 27 07:32:00 (none) local0.warn cgminer[382]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 07:32:00 (none) local0.warn cgminer[382]: check_asic_reg: Chain3 has 60 ASICs

Hi, my second one is also using your firmware but its chain 2 disappeared. I tried to reboot few times but it still has that problem. Anybody had the same issue?

I search info about "Discarded" and found it: