I have some problem with setting frequency for single hashboard.....
https://imgur.com/gq64Rft
https://imgur.com/RxI9wFd
Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 82. (Read 125911 times)
Hi Blissz,
There are two URL (dash.supernova.ca:9995)-->devFeeMiner.2 and (dash-eu.coinmine.pl:6099) --> devFeeMiner.1
? !!!! that are running now and i have no idea what they are for as I did not write them. Also, when i go to the settings and try to remove them i can't find them. Is it something you added or you're aware of? Please take a look they are shown in the picture. It would be great if you can tell me what they are. I think there is something wrong.
There are two URL (dash.supernova.ca:9995)-->devFeeMiner.2 and (dash-eu.coinmine.pl:6099) --> devFeeMiner.1
? !!!! that are running now and i have no idea what they are for as I did not write them. Also, when i go to the settings and try to remove them i can't find them. Is it something you added or you're aware of? Please take a look they are shown in the picture. It would be great if you can tell me what they are. I think there is something wrong. I have one rig running the 1//21 at 16GH 800W. 456 global lowest volt setting. fan auto. If i run fans less than 40% i get errors so just leave it at auto.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
....isolated???
Blissz, any ideea I still can't vote?
he removed / disconnected one chain from the miner...
You should be able to vote, but you can post your preference here as well, as you like
I have one rig running the 1//21 at 16GH 800W. 456 global lowest volt setting. fan auto. If i run fans less than 40% i get errors so just leave it at auto.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
....isolated???
Blissz, any ideea I still can't vote?
I have one rig running the 1//21 at 16GH 800W. 456 global lowest volt setting. fan auto. If i run fans less than 40% i get errors so just leave it at auto.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
Good to hear! The last firmware should work fine on a 2 board setup. The power/cost/speed compromise is the best thing to do now I think.
I have one rig running the 1//21 at 16GH 800W. 456 global lowest volt setting. fan auto. If i run fans less than 40% i get errors so just leave it at auto.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
I have another rig that has a board issue. I have isolated that board following biitmains directions. I have now going to try your 11/25 to see if i can tweak it a bit more.
Thanks for all the work!
I should add that rig one i've had up to 20GH without a problem but I start pushing temps a little with my location. I went with power/cost/speed compromise.
@blissz,
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
Some early ones from me didn't have the blissz extension, but in filesize they were larger:
All are my firmwares, expect number 5.
Thanks Blissz... I guess that is Bitmain's official
I am running the 25/11 update and am having issues with certain pools sites connecting and staying connected, however I don't see the devFeeMiner ever not alive.
When I first started the pool I have setup connected immediately, however with multiple HW errors I reset some values and restarted. This time the miner was perfect, no (or few/min) HWerr, but the pool was marked "Dead". A few minutes later the fan tempo changed and it switched to alive. Then I hear the fans change tempo again and the pool then goes from Dead again.... and stays that way.
Anyone else have this happen? Anyway to resolve?
Thanks
When I first started the pool I have setup connected immediately, however with multiple HW errors I reset some values and restarted. This time the miner was perfect, no (or few/min) HWerr, but the pool was marked "Dead". A few minutes later the fan tempo changed and it switched to alive. Then I hear the fans change tempo again and the pool then goes from Dead again.... and stays that way.
Anyone else have this happen? Anyway to resolve?
Thanks
Which pool / port? I don't want to advertise the pools I use, but I find them quite stable. So at least put those in your config as backup if you can.
edit: checked the users pool on the bitmain stock firmware, but it's dead on the stock firmware as well. Issue is not related to the custom firmware
I am running the 25/11 update and am having issues with certain pools sites connecting and staying connected, however I don't see the devFeeMiner ever not alive.
When I first started the pool I have setup connected immediately, however with multiple HW errors I reset some values and restarted. This time the miner was perfect, no (or few/min) HWerr, but the pool was marked "Dead". A few minutes later the fan tempo changed and it switched to alive. Then I hear the fans change tempo again and the pool then goes from Dead again.... and stays that way.
Anyone else have this happen? Anyway to resolve?
Thanks
When I first started the pool I have setup connected immediately, however with multiple HW errors I reset some values and restarted. This time the miner was perfect, no (or few/min) HWerr, but the pool was marked "Dead". A few minutes later the fan tempo changed and it switched to alive. Then I hear the fans change tempo again and the pool then goes from Dead again.... and stays that way.
Anyone else have this happen? Anyway to resolve?
Thanks
CONFIRMED
Bitmain gave me (I'm assuming others?) $125 coupon for every D3 ordered!!!
Bitmain gave me (I'm assuming others?) $125 coupon for every D3 ordered!!!
Same here.
@blissz,
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
Some early ones from me didn't have the blissz extension, but in filesize they were larger:
All are my firmwares, expect number 5.
@blissz,
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
@blissz,
every reset, the D3 will perform differently in terms of HW error. at some of the reset (still same setting of Volt and Freq), it get minimum HW error running for hours. some reset can see tons of error within hr!
is it normal?
every reset, the D3 will perform differently in terms of HW error. at some of the reset (still same setting of Volt and Freq), it get minimum HW error running for hours. some reset can see tons of error within hr!
is it normal?
I've seen it on my unit as well. Also without the firmware mod. It happens if you're running it at the limits.
Hi @blissz... hi folks...
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
You can run them ~16.5 to 17.0 Gh/s at ~750 watt with the custom firmware (at lowest voltage setting)
17 GH/s at 750w = I'll earn 15$ for each D3 today, at my home with DASH, without any unforeseen circumstances (whattomine say this)!
Thanx anyway man... if u need... i'm here!
You will earn like 6-7 usd/day including electricity cost. You have to deduct that from those 7 bucks a day/unit. That's what my 12 D3's are mining atm...unfortunately
I'll wait more algos for our D3... I don't know why but I know it will happen!
@blissz,
every reset, the D3 will perform differently in terms of HW error. at some of the reset (still same setting of Volt and Freq), it get minimum HW error running for hours. some reset can see tons of error within hr!
is it normal?
every reset, the D3 will perform differently in terms of HW error. at some of the reset (still same setting of Volt and Freq), it get minimum HW error running for hours. some reset can see tons of error within hr!
is it normal?
Hi @blissz... hi folks...
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
You can run them ~16.5 to 17.0 Gh/s at ~750 watt with the custom firmware (at lowest voltage setting)
17 GH/s at 750w = I'll earn 15$ for each D3 today, at my home with DASH, without any unforeseen circumstances (whattomine say this)!
Thanx anyway man... if u need... i'm here!
You will earn like 6-7 usd/day including electricity cost. You have to deduct that from those 7 bucks a day/unit. That's what my 12 D3's are mining atm...unfortunately
Hi @blissz... hi folks...
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
You can run them ~16.5 to 17.0 Gh/s at ~750 watt with the custom firmware (at lowest voltage setting)
17 GH/s at 750w = I'll earn 15$ for each D3 today, at my home with DASH, without any unforeseen circumstances (whattomine say this)!
Thanx anyway man... if u need... i'm here!
The only way to save myself it's to wait a great Update with more algos...i really hope it will happen!
If u need beta tester.. i'm here....... thanx at all.
ok anyone else get an email and be given a TONNNNNNN a coupons from bitmain???
like literally over $4400 worth of coupons??
is this an "I'm sorry" for all the D3's I bought that are personal heaters?
??like literally over $4400 worth of coupons??
is this an "I'm sorry" for all the D3's I bought that are personal heaters?
It's 125 usd coupon/ each D3 buyed
Hi @blissz... hi folks...
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
I'm an "happy" owner of 8 D3s, pity that in my country are no longer useful. My electricity is too expensive. I'll receive them next week... I would cry, but i prefer to destroy Bitmain!
I would know what is the minimum wattage for 19.3 GH/s... if i've understood whit the @blissz mod i can set (without hw manipulation) various parameter like volt, freq, etc... but if i want run my D3 at 19 GH/s, how much i can reduce watts?
If i'll have 19.3 GH/s at 750w (but i know that is impossible).. i'll earn 50$ for each D3 today at my home... ahahahah!
@blissz... i don't ask for a miracle, but if u want a beta tester to f*** Bitmain, i'm here... thanx man for your hard work!
You can run them ~16.5 to 17.0 Gh/s at ~750 watt with the custom firmware (at lowest voltage setting)
CONFIRMED
Bitmain gave me (I'm assuming others?) $125 coupon for every D3 ordered!!!
Bitmain gave me (I'm assuming others?) $125 coupon for every D3 ordered!!!
Jump to: