Wow man nicely done ^^^^^^^ !
Big improvement.
Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 234. (Read 346285 times)
January 28, 2014, 06:28:00 PM
January 28, 2014, 06:23:36 PM
So after yesterdays rig upload:
I have now created V2 setup
Will upload the ants soon
Much cleaner and better looking plus temps are down by 10c on average
Cheers
I have now created V2 setup
Will upload the ants soon
Much cleaner and better looking plus temps are down by 10c on average
Cheers
January 28, 2014, 04:59:23 PM
Hey guys there are a couple of user type threads for the antminers. Everytime i see this thread bumped i think there might be some shipping update for those who ordered right before the sale ended.
January 28, 2014, 04:50:10 PM
Guys question:
Does any of you use a UPS with their miner?
Does any of you use a UPS with their miner?
Yes, need to get another one for the ants
January 28, 2014, 04:48:44 PM
Guys question:
Does any of you use a UPS with their miner?
Does any of you use a UPS with their miner?
January 28, 2014, 04:27:29 PM
besides, i only get 197 GH/s of my miners running at 400 Mhz
is this due to using Wifi? (one hosts the acces point the other is client)
Probably - I get 2-8% lower performance using built-in wifi depending upon the device.is this due to using Wifi? (one hosts the acces point the other is client)
Interesting. I have only two, but I know they don't run the same rate given the same connection. Both run slower on wifi and slower still if I let them heat up. Right now both are being fed by a 500Mbps PowerLine adapter running to a 4-port switch (overkill I know, but still better than either wifi bridge or (ick) their built-in wifi). I also run 400 MHz: one gets 200-202, the other 203-206.
January 28, 2014, 04:19:15 PM
besides, i only get 197 GH/s of my miners running at 400 Mhz
is this due to using Wifi? (one hosts the acces point the other is client)
Probably - I get 2-8% lower performance using built-in wifi depending upon the device.is this due to using Wifi? (one hosts the acces point the other is client)
January 28, 2014, 04:02:13 PM
[/quote]
Bro set the defualt gateway for BOTH PC and MINER to: 192.168.1.1
YOUR PC IP ipv4: 192.168.1.254
then connect to the IP address on your machine
[/quote]
Default gateway can be whatever you set it to as long as it is in your subnet. 192.168.1.1 is the default out of the box standard however some people like to obfuscate this value
January 28, 2014, 04:00:18 PM
LOVE YOU GUYS, THANK YOU, FUCKING AWESOME COMMUNITY!
There are probably quite a few network techs on here, this problem was very easy to diagnose
January 28, 2014, 03:45:58 PM
LOVE YOU GUYS, THANK YOU, FUCKING AWESOME COMMUNITY!
January 28, 2014, 03:28:44 PM
it started. All i did was change the default gateway to 192.168.1.254 nothing else...
showing 181GH/s with temps at 39 and 41 degrees
YEEEHAR! THAR SHE BLOWS!
January 28, 2014, 03:23:17 PM
try stratum.mining.eligius.st:3334 no http and no stratum+tcp just stratum.mining.eligius.st
as user set your minning address and whatever password
as user set your minning address and whatever password
right
tried the following pools add's for Slush's Pool
http://api.bitcoin.cz:8332
stratum.bitcoin.cz:3333
stratum.mining.eligius.st:3334
http://stratum.bitcoin.cz:3333
doesnt work, and I cant ping to google.com its gives error as bad address (btw typing as google.com with no www. or https)
my LAN setting is on DHCP
the WAN is set to Static IP and DHCP is disabled (as other member suggested to do)
On the Antminer, when you do the network ping tests you don't need either the leading protocol type (e.g. http://) and you don't need the port (e.g. :3333) you only need that info when you enter the pool address.
Right, so if you can't ping google.com from the network test page, then your Antminer's network is not setup correctly.
Make sure you can ping google from your computer command prompt or console, then get the following information from your computer, you should be able to get it either from ipconfig /all in a command prompt on windows or ifconfig from a console on mac or linux.
IPv4 address
Subnet Mask
Default Gateway
DNS Servers
You need to use that information and enter the correct parts of it into the Antminer's network settings for the WAN adapter.
IP address needs to be unique in the last 3 numbers, so don't use an address that is already used on your network (especially your own computers address) e.g. if your computer is 192.168.1.55 make sure you don't put the same IP on the Antminer.
Subnet Mask, Default Gateway & DNS Servers all need to be the same on the antminer as your computer
ok bro the ants WAN reads as
Protocol: Static address
IPv4 address: 192.168.1.99
IPv4 netmask: 255.255.255.0
IPv4 gateway: 192.168.1.1
IPv4 broadcast: 192.168.1.255
Custom DNS: 8.8.8.8
my own info off ipconfig
IPv4 address: 192.168.1.xx (which is on the same network as the antminer right?)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254 (this is same for DHCP Gateway and for DNS Servers)
was it wrong for me to publish any of that info? and I sent pm to elasticband but his not online... been at this for a while and im loosing heart
so the default gateway and DNS servers differ from the number reported in the antminer WAN settings, is this the prob?
No problem, thats internal network info nothing risky there.
Looks like you just need to change your Gateway and DNS servers on the Antminer to match your PC, so 192.168.1.254 which is probably your router address.
If there are still problems try 8.8.8.8 as the DNS server, but keep the gatway as 192.168.1.254
Your antminer is plugged into your router right? If so you should be good to go.
I PM'ed you re remote help if you need it.
ok, is set the Default Gateway to same as my comp 192.168.1.254
should i also change the IPv4 broadcast: from 192.168.1.255 to 192.168.1.254 ?
elasticband tried to help for a minute but was unable and had to take off.. i pm'd you Biffa
Bro set the defualt gateway for BOTH PC and MINER to: 192.168.1.1
YOUR PC IP ipv4: 192.168.1.254
then connect to the IP address on your machine
it started. All i did was change the default gateway to 192.168.1.254 nothing else...
showing 181GH/s with temps at 39 and 41 degrees
January 28, 2014, 03:06:20 PM
try stratum.mining.eligius.st:3334 no http and no stratum+tcp just stratum.mining.eligius.st
as user set your minning address and whatever password
as user set your minning address and whatever password
right
tried the following pools add's for Slush's Pool
http://api.bitcoin.cz:8332
stratum.bitcoin.cz:3333
stratum.mining.eligius.st:3334
http://stratum.bitcoin.cz:3333
doesnt work, and I cant ping to google.com its gives error as bad address (btw typing as google.com with no www. or https)
my LAN setting is on DHCP
the WAN is set to Static IP and DHCP is disabled (as other member suggested to do)
On the Antminer, when you do the network ping tests you don't need either the leading protocol type (e.g. http://) and you don't need the port (e.g. :3333) you only need that info when you enter the pool address.
Right, so if you can't ping google.com from the network test page, then your Antminer's network is not setup correctly.
Make sure you can ping google from your computer command prompt or console, then get the following information from your computer, you should be able to get it either from ipconfig /all in a command prompt on windows or ifconfig from a console on mac or linux.
IPv4 address
Subnet Mask
Default Gateway
DNS Servers
You need to use that information and enter the correct parts of it into the Antminer's network settings for the WAN adapter.
IP address needs to be unique in the last 3 numbers, so don't use an address that is already used on your network (especially your own computers address) e.g. if your computer is 192.168.1.55 make sure you don't put the same IP on the Antminer.
Subnet Mask, Default Gateway & DNS Servers all need to be the same on the antminer as your computer
ok bro the ants WAN reads as
Protocol: Static address
IPv4 address: 192.168.1.99
IPv4 netmask: 255.255.255.0
IPv4 gateway: 192.168.1.1
IPv4 broadcast: 192.168.1.255
Custom DNS: 8.8.8.8
my own info off ipconfig
IPv4 address: 192.168.1.xx (which is on the same network as the antminer right?)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254 (this is same for DHCP Gateway and for DNS Servers)
was it wrong for me to publish any of that info? and I sent pm to elasticband but his not online... been at this for a while and im loosing heart
so the default gateway and DNS servers differ from the number reported in the antminer WAN settings, is this the prob?
No problem, thats internal network info nothing risky there.
Looks like you just need to change your Gateway and DNS servers on the Antminer to match your PC, so 192.168.1.254 which is probably your router address.
If there are still problems try 8.8.8.8 as the DNS server, but keep the gatway as 192.168.1.254
Your antminer is plugged into your router right? If so you should be good to go.
I PM'ed you re remote help if you need it.
ok, is set the Default Gateway to same as my comp 192.168.1.254
should i also change the IPv4 broadcast: from 192.168.1.255 to 192.168.1.254 ?
elasticband tried to help for a minute but was unable and had to take off.. i pm'd you Biffa
Bro set the defualt gateway for BOTH PC and MINER to: 192.168.1.1
YOUR PC IP ipv4: 192.168.1.254
then connect to the IP address on your machine
January 28, 2014, 03:03:16 PM
try stratum.mining.eligius.st:3334 no http and no stratum+tcp just stratum.mining.eligius.st
as user set your minning address and whatever password
as user set your minning address and whatever password
right
tried the following pools add's for Slush's Pool
http://api.bitcoin.cz:8332
stratum.bitcoin.cz:3333
stratum.mining.eligius.st:3334
http://stratum.bitcoin.cz:3333
doesnt work, and I cant ping to google.com its gives error as bad address (btw typing as google.com with no www. or https)
my LAN setting is on DHCP
the WAN is set to Static IP and DHCP is disabled (as other member suggested to do)
On the Antminer, when you do the network ping tests you don't need either the leading protocol type (e.g. http://) and you don't need the port (e.g. :3333) you only need that info when you enter the pool address.
Right, so if you can't ping google.com from the network test page, then your Antminer's network is not setup correctly.
Make sure you can ping google from your computer command prompt or console, then get the following information from your computer, you should be able to get it either from ipconfig /all in a command prompt on windows or ifconfig from a console on mac or linux.
IPv4 address
Subnet Mask
Default Gateway
DNS Servers
You need to use that information and enter the correct parts of it into the Antminer's network settings for the WAN adapter.
IP address needs to be unique in the last 3 numbers, so don't use an address that is already used on your network (especially your own computers address) e.g. if your computer is 192.168.1.55 make sure you don't put the same IP on the Antminer.
Subnet Mask, Default Gateway & DNS Servers all need to be the same on the antminer as your computer
ok bro the ants WAN reads as
Protocol: Static address
IPv4 address: 192.168.1.99
IPv4 netmask: 255.255.255.0
IPv4 gateway: 192.168.1.1
IPv4 broadcast: 192.168.1.255
Custom DNS: 8.8.8.8
my own info off ipconfig
IPv4 address: 192.168.1.xx (which is on the same network as the antminer right?)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254 (this is same for DHCP Gateway and for DNS Servers)
was it wrong for me to publish any of that info? and I sent pm to elasticband but his not online... been at this for a while and im loosing heart
so the default gateway and DNS servers differ from the number reported in the antminer WAN settings, is this the prob?
No problem, thats internal network info nothing risky there.
Looks like you just need to change your Gateway and DNS servers on the Antminer to match your PC, so 192.168.1.254 which is probably your router address.
If there are still problems try 8.8.8.8 as the DNS server, but keep the gatway as 192.168.1.254
Your antminer is plugged into your router right? If so you should be good to go.
I PM'ed you re remote help if you need it.
ok, is set the Default Gateway to same as my comp 192.168.1.254
should i also change the IPv4 broadcast: from 192.168.1.255 to 192.168.1.254 ?
elasticband tried to help for a minute but was unable and had to take off.. i pm'd you Biffa
January 28, 2014, 02:47:01 PM
Thank you.
The intake fan from the Antminer is enough to cool the chips and keep them in the low 40 degree with an ambient temperature of 21 C.
By adding an exhaust fan your self, the Antminer hash a slight bit faster without having to overclock them.
I haven't overclock them myself, I will overclock them if I finished moving my Jupiters to a datacenter.
I am already at the limit of maximum power draw for my house.
January 28, 2014, 02:39:11 PM
try stratum.mining.eligius.st:3334 no http and no stratum+tcp just stratum.mining.eligius.st
as user set your minning address and whatever password
as user set your minning address and whatever password
right
tried the following pools add's for Slush's Pool
http://api.bitcoin.cz:8332
stratum.bitcoin.cz:3333
stratum.mining.eligius.st:3334
http://stratum.bitcoin.cz:3333
doesnt work, and I cant ping to google.com its gives error as bad address (btw typing as google.com with no www. or https)
my LAN setting is on DHCP
the WAN is set to Static IP and DHCP is disabled (as other member suggested to do)
On the Antminer, when you do the network ping tests you don't need either the leading protocol type (e.g. http://) and you don't need the port (e.g. :3333) you only need that info when you enter the pool address.
Right, so if you can't ping google.com from the network test page, then your Antminer's network is not setup correctly.
Make sure you can ping google from your computer command prompt or console, then get the following information from your computer, you should be able to get it either from ipconfig /all in a command prompt on windows or ifconfig from a console on mac or linux.
IPv4 address
Subnet Mask
Default Gateway
DNS Servers
You need to use that information and enter the correct parts of it into the Antminer's network settings for the WAN adapter.
IP address needs to be unique in the last 3 numbers, so don't use an address that is already used on your network (especially your own computers address) e.g. if your computer is 192.168.1.55 make sure you don't put the same IP on the Antminer.
Subnet Mask, Default Gateway & DNS Servers all need to be the same on the antminer as your computer
ok bro the ants WAN reads as
Protocol: Static address
IPv4 address: 192.168.1.99
IPv4 netmask: 255.255.255.0
IPv4 gateway: 192.168.1.1
IPv4 broadcast: 192.168.1.255
Custom DNS: 8.8.8.8
my own info off ipconfig
IPv4 address: 192.168.1.xx (which is on the same network as the antminer right?)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254 (this is same for DHCP Gateway and for DNS Servers)
was it wrong for me to publish any of that info? and I sent pm to elasticband but his not online... been at this for a while and im loosing heart
so the default gateway and DNS servers differ from the number reported in the antminer WAN settings, is this the prob?
No problem, thats internal network info nothing risky there.
Looks like you just need to change your Gateway and DNS servers on the Antminer to match your PC, so 192.168.1.254 which is probably your router address.
If there are still problems try 8.8.8.8 as the DNS server, but keep the gatway as 192.168.1.254
Your antminer is plugged into your router right? If so you should be good to go.
I PM'ed you re remote help if you need it.
January 28, 2014, 02:37:19 PM
try stratum.mining.eligius.st:3334 no http and no stratum+tcp just stratum.mining.eligius.st
as user set your minning address and whatever password
as user set your minning address and whatever password
right
tried the following pools add's for Slush's Pool
http://api.bitcoin.cz:8332
stratum.bitcoin.cz:3333
stratum.mining.eligius.st:3334
http://stratum.bitcoin.cz:3333
doesnt work, and I cant ping to google.com its gives error as bad address (btw typing as google.com with no www. or https)
my LAN setting is on DHCP
the WAN is set to Static IP and DHCP is disabled (as other member suggested to do)
On the Antminer, when you do the network ping tests you don't need either the leading protocol type (e.g. http://) and you don't need the port (e.g. :3333) you only need that info when you enter the pool address.
Right, so if you can't ping google.com from the network test page, then your Antminer's network is not setup correctly.
Make sure you can ping google from your computer command prompt or console, then get the following information from your computer, you should be able to get it either from ipconfig /all in a command prompt on windows or ifconfig from a console on mac or linux.
IPv4 address
Subnet Mask
Default Gateway
DNS Servers
You need to use that information and enter the correct parts of it into the Antminer's network settings for the WAN adapter.
IP address needs to be unique in the last 3 numbers, so don't use an address that is already used on your network (especially your own computers address) e.g. if your computer is 192.168.1.55 make sure you don't put the same IP on the Antminer.
Subnet Mask, Default Gateway & DNS Servers all need to be the same on the antminer as your computer
ok bro the ants WAN reads as
Protocol: Static address
IPv4 address: 192.168.1.99
IPv4 netmask: 255.255.255.0
IPv4 gateway: 192.168.1.1
IPv4 broadcast: 192.168.1.255
Custom DNS: 8.8.8.8
my own info off ipconfig
IPv4 address: 192.168.1.xx (which is on the same network as the antminer right?)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254 (this is same for DHCP Gateway and for DNS Servers)
was it wrong for me to publish any of that info? and I sent pm to elasticband but his not online... been at this for a while and im loosing heart
so the default gateway and DNS servers differ from the number reported in the antminer WAN settings, is this the prob?
The ant needs the same default gateway as your network. The ant is set to 192.168.1.1 and it looks like your network is set to 192.168.1.254. Change the default gateway on the ant to 192.168.1.254. Default gateway is what routes from your internal network out to the internet.
January 28, 2014, 02:31:47 PM
Sorry to ask such a newb question.. but I just found bitmain after HF made me cry uncle.
Is there step by step instructions somewhere?
https://bitcointalksearch.org/topic/setup-troubleshoot-bitmain-antminer-s1-180ghs-miner-344970
EDIT: You don't need to cut wires, the new miners come with PCI-E plugs
January 28, 2014, 02:30:32 PM
Sorry to ask such a newb question.. but I just found bitmain after HF made me cry uncle.
Is there step by step instructions somewhere?
Jump to: