Wow what a nightmare!
Sorry dude, hope your Ant still works...
Topic: ANTMINER S2 Discussion and Support Thread - page 89. (Read 355730 times)
Just got my batch4 S2.
Another horror story
They should have left that strip of foam , they used in batch 2 ...
Another horror story
They should have left that strip of foam , they used in batch 2 ...
Are the duplicate shares not proportionate to the physical numbers of chips on the machine? We've got 10x the chips as an S1, which I presumed was the cause of the high discard rate. Am I incorrect?
Unfortunately yes: s1s made in 24 hours 0 duplicated shares, s2s have made an average of 12k duplicated shares
Thanks for the data. Could the throughput be to blame? Sheer numbers of calculations requested to hash?
My S2 spits our discards like it's going out of business, and it doesn't bother me too much as the number of accepted shares versus rejects is reasonable.
Are the duplicate shares not proportionate to the physical numbers of chips on the machine? We've got 10x the chips as an S1, which I presumed was the cause of the high discard rate. Am I incorrect?
Unfortunately yes: s1s made in 24 hours 0 duplicated shares, s2s have made an average of 12k duplicated shares
Compared to the other miners I have in my farm (Bitfury, A1's, S1's), it seems the S2 submits a disproportionate amount of duplicate shares.
Has anyone else noticed this, and aware of possible solutions ? Isolated case ?
Has anyone else noticed this, and aware of possible solutions ? Isolated case ?
Are the duplicate shares not proportionate to the physical numbers of chips on the machine? We've got 10x the chips as an S1, which I presumed was the cause of the high discard rate. Am I incorrect?
Has anyone else noticed this, and aware of possible solutions ? Isolated case ?
I'm using a few s2s on ghash.io, and yes, they are producing an higher rate of duplicated shares, compared to the previus mining situation.
Do you have the latest firmware on your ant?
My S2 batch 2 has been hashing stably since it was delivered in April.
Today I suddenly see the hash rate fluctuate wildly, going down to 300gh then back up to 1100gh and so on.
I'll investigate when I get home. Has anyone seen this behavior?
Today I suddenly see the hash rate fluctuate wildly, going down to 300gh then back up to 1100gh and so on.
I'll investigate when I get home. Has anyone seen this behavior?
The same happened to me this last night, dont know why
. I am mining at eligius by the way 
Compared to the other miners I have in my farm (Bitfury, A1's, S1's), it seems the S2 submits a disproportionate amount of duplicate shares.
Has anyone else noticed this, and aware of possible solutions ? Isolated case ?
Has anyone else noticed this, and aware of possible solutions ? Isolated case ?
My S2 batch 2 has been hashing stably since it was delivered in April.
Today I suddenly see the hash rate fluctuate wildly, going down to 300gh then back up to 1100gh and so on.
I'll investigate when I get home. Has anyone seen this behavior?
Today I suddenly see the hash rate fluctuate wildly, going down to 300gh then back up to 1100gh and so on.
I'll investigate when I get home. Has anyone seen this behavior?
New price for AntMiner S2 1 TH/s Miner Batch 4: 2244 USD each one, shipping cost included.
Sorry can't find the coupon exchange topic.
7 S2 400$ coupon, valid 'till 30.05
7 S1 0.05Btc coupon, valid 'till 29.05.
Give it for free....
I won't buy hardware this month.
Drop PM if interested.
Edit:
Out of S1 coupons.
1st was xoun for 2 coupons.
2nd was klondike_bar with 5 coupons
3rd was Gogreen with 2 coupons. (He had luck, I found 2 more on my girlfriend's account.)
So overall no S1, but have 9 S2 coupon for free. Just run with it....
7 S2 400$ coupon, valid 'till 30.05
7 S1 0.05Btc coupon, valid 'till 29.05.
Give it for free....
I won't buy hardware this month.
Drop PM if interested.
Edit:
Out of S1 coupons.
1st was xoun for 2 coupons.
2nd was klondike_bar with 5 coupons
3rd was Gogreen with 2 coupons. (He had luck, I found 2 more on my girlfriend's account.)
So overall no S1, but have 9 S2 coupon for free. Just run with it....
COUPONS FOR SALE !!
5x Coupon for S1 0.05 price = 0.2BTC
10x Coupon for S2 400 USD price= 4.5BTC
Send PM if interested...
5x Coupon for S1 0.05 price = 0.2BTC
10x Coupon for S2 400 USD price= 4.5BTC
Send PM if interested...
Pack your miners better please. Almost had a ruined miner.
Happily it is mining away at 1 Th/s after an hour. Please please please fix how you ship the S2, because cards shouldn't be sloshing about in transit.
Happily it is mining away at 1 Th/s after an hour. Please please please fix how you ship the S2, because cards shouldn't be sloshing about in transit.
Mine arrived way worse
.. had to RMA at least 3 board .. still waiting for new boards.Pics please!
Posted it earlier on the forum
http://imgur.com/71XjOAp
I received a unit today that all the cards were all over the place. 3 of the connectors were bent and a 4th was ripped off completely. Also 2 of the fan pins were mangled. I emailed bitmain and asked for a refund as the unit has no hope of being repaired.
Hi
please PM us your email box.
My batch 3 S2 is plagued with problems.
1. Impossible to reboot/shutdown(Hot or cold) without having do SD recovery. (SD recovery never works first time around)
2. 1 blade intermittently gets XXX00XX ---XX--00 in ASIC status
3. 1 blade permanently gets XXX00XX ASIC Status
4. 1 blade after 2 days stops hashing and temperature shows its about 20 degrees cooler.
Asked for repeated RMA but support keeps on ignoring requests or offers troubleshooting solutions that are no longer relevant.
Pretty pitiful really, I don't how this unit could have passed their Quality Control process.
1. Impossible to reboot/shutdown(Hot or cold) without having do SD recovery. (SD recovery never works first time around)
2. 1 blade intermittently gets XXX00XX ---XX--00 in ASIC status
3. 1 blade permanently gets XXX00XX ASIC Status
4. 1 blade after 2 days stops hashing and temperature shows its about 20 degrees cooler.
Asked for repeated RMA but support keeps on ignoring requests or offers troubleshooting solutions that are no longer relevant.
Pretty pitiful really, I don't how this unit could have passed their Quality Control process.
Hi,
please PM us your email box
I received a unit today that all the cards were all over the place. 3 of the connectors were bent and a 4th was ripped off completely. Also 2 of the fan pins were mangled. I emailed bitmain and asked for a refund as the unit has no hope of being repaired.
My batch 3 S2 is plagued with problems.
1. Impossible to reboot/shutdown(Hot or cold) without having do SD recovery. (SD recovery never works first time around)
2. 1 blade intermittently gets XXX00XX ---XX--00 in ASIC status
3. 1 blade permanently gets XXX00XX ASIC Status
4. 1 blade after 2 days stops hashing and temperature shows its about 20 degrees cooler.
Asked for repeated RMA but support keeps on ignoring requests or offers troubleshooting solutions that are no longer relevant.
Pretty pitiful really, I don't how this unit could have passed their Quality Control process.
1. Impossible to reboot/shutdown(Hot or cold) without having do SD recovery. (SD recovery never works first time around)
2. 1 blade intermittently gets XXX00XX ---XX--00 in ASIC status
3. 1 blade permanently gets XXX00XX ASIC Status
4. 1 blade after 2 days stops hashing and temperature shows its about 20 degrees cooler.
Asked for repeated RMA but support keeps on ignoring requests or offers troubleshooting solutions that are no longer relevant.
Pretty pitiful really, I don't how this unit could have passed their Quality Control process.
I have two S1 coupons and two S2 coupons
I'm selling the S1 coupons for .015 BTC and the S2 coupons for .025 BTC
Send PM if interested, I check PM's several times a day
I'm selling the S1 coupons for .015 BTC and the S2 coupons for .025 BTC
Send PM if interested, I check PM's several times a day
Pack your miners better please. Almost had a ruined miner.
Happily it is mining away at 1 Th/s after an hour. Please please please fix how you ship the S2, because cards shouldn't be sloshing about in transit.
Happily it is mining away at 1 Th/s after an hour. Please please please fix how you ship the S2, because cards shouldn't be sloshing about in transit.
Mine arrived way worse
.. had to RMA at least 3 board .. still waiting for new boards.Pics please!
Pack your miners better please. Almost had a ruined miner.
Happily it is mining away at 1 Th/s after an hour. Please please please fix how you ship the S2, because cards shouldn't be sloshing about in transit.
Happily it is mining away at 1 Th/s after an hour. Please please please fix how you ship the S2, because cards shouldn't be sloshing about in transit.
Mine arrived way worse
.. had to RMA at least 3 board .. still waiting for new boards. Jump to: