any news about a further batch or will they going to sell from stock? 
Topic: ANTMINER S3+ Discussion and Support Thread - page 312. (Read 710164 times)
Batch 5 is sold out any news about a further batch or will they going to sell from stock?
any news about a further batch or will they going to sell from stock? 
I just got back from UPS to send my faulty board back to Bitmain. The guy at the counter was amazed that the label was for Express service, and he said that costs over $1000 to do that! If Bitmain would set up an advance replacement system (with a small BTC deposit for security against receiving the faulty unit), they could save that excessive cost in one direction of the warranty process.
I just sent them an email to that effect. It's a win/win - Bitmain could save a lot of money by only having to ship the replacement part on the expensive service, and use a regular (cheap) service to receive the faulty. The customer benefits by getting the replacement part first and won't have to shut down their mining hardware while waiting for the replacement (at least in cases unlike mine where they at least have a partially operable unit).
BITMAIN - PLEASE CONSIDER THIS! Not only is it pretty much standard practice for a lot of manufacturers, in this case it actually will SAVE YOU A SHIPLOAD OF MONEY. Add to that the side-effect of happy customers, I don't see how you can't implement this!
I just sent them an email to that effect. It's a win/win - Bitmain could save a lot of money by only having to ship the replacement part on the expensive service, and use a regular (cheap) service to receive the faulty. The customer benefits by getting the replacement part first and won't have to shut down their mining hardware while waiting for the replacement (at least in cases unlike mine where they at least have a partially operable unit).
BITMAIN - PLEASE CONSIDER THIS! Not only is it pretty much standard practice for a lot of manufacturers, in this case it actually will SAVE YOU A SHIPLOAD OF MONEY. Add to that the side-effect of happy customers, I don't see how you can't implement this!
Can you give me a single example of an electronics manufacturer agreeing to send out a replacement part before they receive the defective part?!?! Certainly not standard practice.
Also, companies that ship large amounts negotiate rates with the carriers directly, NO WAY that costs bitmain anything close to $1000!
For me HP and DELL sends replacement parts in advance.
They even sends new non-refurbished part in advance and takes the faulty parts in return.
They never asked me for any security deposit or credit card.
If you're doing that through the company you work for, HP (don't know about Dell) does that more than likely because your company has a maintenance contract with HP. For those without maintenance contracts, HP will send the replacement first if they can charge your credit card / your company's credit card, and then upon return of the defective unit they'll credit your charge card with whatever credit amount is stated for return cores. Been there, done that, many many times (with HP).
Thanks for that...
So the 10 I have set up in my front room on a circuit with all my other living room electricals is overloaded then?
Only 10 per 20 amp breaker ? So 50 in a house ? With the house only being allowed 100 amp max?
My father who used to be a sparky on planes informed me it was amps to worry about, not volts, it was he who said these run on 12v so many would be fine...
Thanks
S3 uses 350W of power, stock. 20AMP is 4800W, so you can safely plug 12 S3s, to be on the safe side. Use a decent PSU, 80 Plus and keep it under 80% of PSU load.
Cheers
So the 10 I have set up in my front room on a circuit with all my other living room electricals is overloaded then?
Only 10 per 20 amp breaker ? So 50 in a house ? With the house only being allowed 100 amp max?
My father who used to be a sparky on planes informed me it was amps to worry about, not volts, it was he who said these run on 12v so many would be fine...
Thanks
Anyone know how many of these I can safely power on a 20 amp breaker ?
I am useless when it comes to working this out.
I was told many would be fine due to using 12v.
But I would appreciate someone in the know answering.
Thanks in advance.
edit: UK based, so 240v.
I am useless when it comes to working this out.
I was told many would be fine due to using 12v.
But I would appreciate someone in the know answering.
Thanks in advance.
edit: UK based, so 240v.
S3 uses 350W of power, stock. 20AMP is 4800W, so you can safely plug 12 S3s, to be on the safe side. Use a decent PSU, 80 Plus and keep it under 80% of PSU load.
Cheers
Anyone know how many of these I can safely power on a 20 amp breaker ?
I am useless when it comes to working this out.
I was told many would be fine due to using 12v.
But I would appreciate someone in the know answering.
Thanks in advance.
edit: UK based, so 240v.
I am useless when it comes to working this out.
I was told many would be fine due to using 12v.
But I would appreciate someone in the know answering.
Thanks in advance.
edit: UK based, so 240v.
S3 uses 350W of power, stock. 20AMP is 4800W, so you can safely plug 12 S3s, to be on the safe side. Use a decent PSU, 80 Plus and keep it under 80% of PSU load.
Cheers
Anyone know how many of these I can safely power on a 20 amp breaker ?
I am useless when it comes to working this out.
I was told many would be fine due to using 12v.
But I would appreciate someone in the know answering.
Thanks in advance.
edit: UK based, so 240v.
I am useless when it comes to working this out.
I was told many would be fine due to using 12v.
But I would appreciate someone in the know answering.
Thanks in advance.
edit: UK based, so 240v.
Just got five Batch 5's. Added wifi antennas to all. Configured exactly like S1s. Too early to give longer term stats, but...I have about 80% signal (@60 ft with 3 walls between miners and router - exactly the same as the S1's). One hour hash rate is ~440 - 450GH/s.
Wifi mod is less than 6 bucks a miner. I didn't drill any holes...just ran the pigtail through the same slot as front fan wires and propped the antenna on the top of the fan case/face of the miner (not great, but I hardly touch the miners once running properly so this should be fine...no need for switch or network cabling -- Just configure, plug 'em in and mine)...even with the mod, I had all 5 up and running in about an hour and a half.
I will update with longer term stats after a day or two. Only issue was one fan that had a pinched sensor wire (blue)...so the fan ran full blast...unpinched wire...all is good. The S3s are MUCH quieter than the S1s (at least at stock clock)
Once again, BITMAIN ROCKS!
Wifi mod is less than 6 bucks a miner. I didn't drill any holes...just ran the pigtail through the same slot as front fan wires and propped the antenna on the top of the fan case/face of the miner (not great, but I hardly touch the miners once running properly so this should be fine...no need for switch or network cabling -- Just configure, plug 'em in and mine)...even with the mod, I had all 5 up and running in about an hour and a half.
I will update with longer term stats after a day or two. Only issue was one fan that had a pinched sensor wire (blue)...so the fan ran full blast...unpinched wire...all is good. The S3s are MUCH quieter than the S1s (at least at stock clock)
Once again, BITMAIN ROCKS!
which wifi did you buy ? link or pic ? thanks
anyone asked Bitmain to declare less value per unit to the custom ?
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
Shocker! I company wont commit a crime to save you a couple bucks.
Lowering declaration value will never give you a chance to pay less duty/tax.
They have internet and they are aware of what you are buying.
I just got back from UPS to send my faulty board back to Bitmain. The guy at the counter was amazed that the label was for Express service, and he said that costs over $1000 to do that! If Bitmain would set up an advance replacement system (with a small BTC deposit for security against receiving the faulty unit), they could save that excessive cost in one direction of the warranty process.
I just sent them an email to that effect. It's a win/win - Bitmain could save a lot of money by only having to ship the replacement part on the expensive service, and use a regular (cheap) service to receive the faulty. The customer benefits by getting the replacement part first and won't have to shut down their mining hardware while waiting for the replacement (at least in cases unlike mine where they at least have a partially operable unit).
BITMAIN - PLEASE CONSIDER THIS! Not only is it pretty much standard practice for a lot of manufacturers, in this case it actually will SAVE YOU A SHIPLOAD OF MONEY. Add to that the side-effect of happy customers, I don't see how you can't implement this!
I just sent them an email to that effect. It's a win/win - Bitmain could save a lot of money by only having to ship the replacement part on the expensive service, and use a regular (cheap) service to receive the faulty. The customer benefits by getting the replacement part first and won't have to shut down their mining hardware while waiting for the replacement (at least in cases unlike mine where they at least have a partially operable unit).
BITMAIN - PLEASE CONSIDER THIS! Not only is it pretty much standard practice for a lot of manufacturers, in this case it actually will SAVE YOU A SHIPLOAD OF MONEY. Add to that the side-effect of happy customers, I don't see how you can't implement this!
Can you give me a single example of an electronics manufacturer agreeing to send out a replacement part before they receive the defective part?!?! Certainly not standard practice.
Also, companies that ship large amounts negotiate rates with the carriers directly, NO WAY that costs bitmain anything close to $1000!
For me HP and DELL sends replacement parts in advance.
They even sends new non-refurbished part in advance and takes the faulty parts in return.
They never asked me for any security deposit or credit card.
I just got back from UPS to send my faulty board back to Bitmain. The guy at the counter was amazed that the label was for Express service, and he said that costs over $1000 to do that! If Bitmain would set up an advance replacement system (with a small BTC deposit for security against receiving the faulty unit), they could save that excessive cost in one direction of the warranty process.
I just sent them an email to that effect. It's a win/win - Bitmain could save a lot of money by only having to ship the replacement part on the expensive service, and use a regular (cheap) service to receive the faulty. The customer benefits by getting the replacement part first and won't have to shut down their mining hardware while waiting for the replacement (at least in cases unlike mine where they at least have a partially operable unit).
BITMAIN - PLEASE CONSIDER THIS! Not only is it pretty much standard practice for a lot of manufacturers, in this case it actually will SAVE YOU A SHIPLOAD OF MONEY. Add to that the side-effect of happy customers, I don't see how you can't implement this!
I just sent them an email to that effect. It's a win/win - Bitmain could save a lot of money by only having to ship the replacement part on the expensive service, and use a regular (cheap) service to receive the faulty. The customer benefits by getting the replacement part first and won't have to shut down their mining hardware while waiting for the replacement (at least in cases unlike mine where they at least have a partially operable unit).
BITMAIN - PLEASE CONSIDER THIS! Not only is it pretty much standard practice for a lot of manufacturers, in this case it actually will SAVE YOU A SHIPLOAD OF MONEY. Add to that the side-effect of happy customers, I don't see how you can't implement this!
They never pay for $1000. Huge volume shippers get free return service from shipping companies.
They are using their free slots of return, not to pay anything for that.
You could ask them for the security deposit workaround and send them first.
Bitmain,
Could you let us know about the upgrade kits for S1s and S2s? When will these be available? I'd like to upgrade all of my S1s. Also, will the DC/DC component be fixed in these?
Why bother? What cost savings are you expecting to realize from reusing an aluminum frame and maybe the controller? $40?Could you let us know about the upgrade kits for S1s and S2s? When will these be available? I'd like to upgrade all of my S1s. Also, will the DC/DC component be fixed in these?
The benefit is not only coming from the $40 but the discount for upgrading blades.
Looks like batch 5 just sold out.
Batch 1 sold out in hours.
Batch 2 also sold out in hours.
Batch 3 sold out in less than a day.
Batch 4 sold out in about a day, maybe slightly more
Batch 5 finally sold out tonight, after being open for what, a couple of weeks?
Point being is the market saturated?
Looks like batch 5 just sold out.
anyone asked Bitmain to declare less value per unit to the custom ?
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
Really??? Why would Bitmain falsify records so that you can avoid paying taxes that you rightfully owe? Why don't you ask your neighbor if they will pay your income taxes for you, too? Note that I pay two or three times more in taxes than most people make in gross pay...I believe many countries' taxation systems are fundamentally broken, however I also believe if abiding by the law. If you don't like the law, be a catalyst for change.
I guess you missed the part where Bitmain used to put a reduced price on every unit. Then when they did it by request. So perhaps you should kindly stfu about how much you like paying taxes.
I just set up a Batch 5 unit that was delivered today, and I could swear that the "Elapsed" time in the "Mining Status" page does not reset, after powering down a unit.
It's throwing off the average hash-rate number.
Read: If it's been up for an hour, and I turn it off, move it to another room, and turn it back on, it shows it's been up for an hour already. The "Uptime" field on the "Overview" page is accurate, however.
It's throwing off the average hash-rate number.
Read: If it's been up for an hour, and I turn it off, move it to another room, and turn it back on, it shows it's been up for an hour already. The "Uptime" field on the "Overview" page is accurate, however.
I have a B1 that does that time to time from a power cycle but always clears with a reboot or save and apply. What a pain though.
anyone asked Bitmain to declare less value per unit to the custom ?
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
Really??? Why would Bitmain falsify records so that you can avoid paying taxes that you rightfully owe? Why don't you ask your neighbor if they will pay your income taxes for you, too? Note that I pay two or three times more in taxes than most people make in gross pay...I believe many countries' taxation systems are fundamentally broken, however I also believe if abiding by the law. If you don't like the law, be a catalyst for change.
Bitmain wont expend any more overhead than they need to which is obvious for the lack of quality control and the handling of their shipping queue.
Maybe instead, you should rule with an iron grasp of sentence construction.
I just set up a Batch 5 unit that was delivered today, and I could swear that the "Elapsed" time in the "Mining Status" page does not reset, after powering down a unit.
It's throwing off the average hash-rate number.
Read: If it's been up for an hour, and I turn it off, move it to another room, and turn it back on, it shows it's been up for an hour already. The "Uptime" field on the "Overview" page is accurate, however.
EDIT: sshing into the box and issuing a "reboot now" command resets the Elapsed time on the Mining Status page.
It's throwing off the average hash-rate number.
Read: If it's been up for an hour, and I turn it off, move it to another room, and turn it back on, it shows it's been up for an hour already. The "Uptime" field on the "Overview" page is accurate, however.
EDIT: sshing into the box and issuing a "reboot now" command resets the Elapsed time on the Mining Status page.
anyone asked Bitmain to declare less value per unit to the custom ?
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
Shocker! I company wont commit a crime to save you a couple bucks.
Just got five Batch 5's. Added wifi antennas to all. Configured exactly like S1s. Too early to give longer term stats, but...I have about 80% signal (@60 ft with 3 walls between miners and router - exactly the same as the S1's). One hour hash rate is ~440 - 450GH/s.
Wifi mod is less than 6 bucks a miner. I didn't drill any holes...just ran the pigtail through the same slot as front fan wires and propped the antenna on the top of the fan case/face of the miner (not great, but I hardly touch the miners once running properly so this should be fine...no need for switch or network cabling -- Just configure, plug 'em in and mine)...even with the mod, I had all 5 up and running in about an hour and a half.
I will update with longer term stats after a day or two. Only issue was one fan that had a pinched sensor wire (blue)...so the fan ran full blast...unpinched wire...all is good. The S3s are MUCH quieter than the S1s (at least at stock clock)
Once again, BITMAIN ROCKS!
Wifi mod is less than 6 bucks a miner. I didn't drill any holes...just ran the pigtail through the same slot as front fan wires and propped the antenna on the top of the fan case/face of the miner (not great, but I hardly touch the miners once running properly so this should be fine...no need for switch or network cabling -- Just configure, plug 'em in and mine)...even with the mod, I had all 5 up and running in about an hour and a half.
I will update with longer term stats after a day or two. Only issue was one fan that had a pinched sensor wire (blue)...so the fan ran full blast...unpinched wire...all is good. The S3s are MUCH quieter than the S1s (at least at stock clock)
Once again, BITMAIN ROCKS!
anyone asked Bitmain to declare less value per unit to the custom ?
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
I asked them to do so they said they can't do it.
I pay 30 % TAX that would be very helpfull...
Jump to: