Topic: ANTMINER S4 Discussion and Support Thread - page 101. (Read 301481 times)

What did you buy, S3 or S4? I am sitting on 13 S3 coupons you could have used as well as S4 coupons probably won't use. We could have reached a deal both would have been happy with.
To answer your question, don't worry about it as I haven't yet had a confirm payment beat the hour deadline and it never has been a problem.

I'm curious...

I sent a payment to bitmaintech.com via Coinbase wallet approximately 5 minutes ago to purchase one S4.  I have sixteen (16) S3's I have purchased on eBay; ten (10) of which were mailed straight to me from China.  This is my first purchase from bitmaintch.com.  Hopefully, it will not be my last.

What I was curious about is how long it takes for payment to be confirmed and they send an email to me?  I already received an email telling me I have one hour to make my purchase before cancelation.  I completed that purchase about 2 minutes after receiving that email.

Thanks so much, Storm. I appreciate the fact that atleast someone understands where I am coming from, and I agree with the entire content of your post. Since last evening, a BITMAIN staff rep reached out to me via email so that we could hopefully come to an agreement that is fair for both parties, and it looks like that will be the case. I will continue to purchase hardware from BITMAIN once I have been compensated because I know that they are very busy and it can be difficult to satisfy every customer's demands when you have so much going on, but they seem to be committed to customer satisfaction and that means a hell of a lot to me, especially despite all the negative crap that I posted during moments of frustration. I know that I probably come off as bi-polar if you read this thread, but I want to reiterate that in my past experience with BITMAIN, I have never had a single issue with their hardware, and if I have, it was taken care of quickly (via RMA or troubleshooting). I hate that I have sunk so low to badmouth BITMAIN in this thread, but it got to a point where I felt like they were completely ignoring me and I let my temper get the best of me. That is no longer the case. I hate to waste all of these S3 coupons, so as soon as I am compensated, I plan on purchasing a few S3s, maybe even more to sell on ebay (depending on if they decide to lower the price now that BTC is worth ~$375).
IMO, they might be better off pricing the S3's (and all future products) the same way the priced the S4's--that is, price them using USD,  and give out coupons for $5/$10/$15 off instead of .035 BTC off. A few days ago, you could purchase an S3 for something like $172 USD, but now that has gone up to $192 due to the price rise of BTC. I understand why there might be an argument that "well, now that BTC is worth more, the product should cost more and everything will work out because its all proportional", and that may be the case, but it certainly seems to be deterring me from purchasing a ton of S3s right now. Instead, buying another S4 seems like the better option, as long as the USD value of bitcoin continues to climb.

+1
QFT

Definitely the weakness in an otherwise excellent company.
They do seem to be getting better.
Maybe they are learning from this most recent disaster as they go. I would like to think so.
I have personally seen improvement already.

One can only hope they do not ignore this very obvious weakpoint.

They have done alot right recently, by delivering the long awaited firmwares for all units, and trying their best to remedy this S4 disaster. You can tell they are trying!
However, I have to agree with you on what they have done poorly up until now also. Specifically communication and customer service.
Some things certainly could have been handled better.
Communication being number one.

Compensation should be paid where it is due.
10 days given to everyone before an imaginary line in the sand, is not exactly fair.
Some were affected beyond that line.
Others were affected much longer than 10 days.

Obviously it is a very long line of people affected by this issue (so I can see how defaulting 10 for everyone is easiest), but obviously some exceptions should be made to arbitrary guidelines and criteria.

ar·bi·trar·y
adjective
    based on random choice or personal whim, rather than any reason or system.


Best of luck to you Mr.Greenhat I suspect they will pull through for you eventually.

Edgar, if you haven't noticed I have personally apologized to you in the scam accusations thread that I have now double edited (first edit was to praise BITMAIN for getting me a working unit and showing that they actually did right by me), however I have since edited it again, and I have struck out everything positive I had written.

All that I can do is share my experience with BITMAIN, which has been 95% positive up until about three weeks ago, and since then, many promises were made to me by BITMAIN and the BITMAIN staff, some of those promises they came through on, the only one they didn't was the compensation issue. At this point, all i am asking for is 10 days of compensation for  lost mining time, the exact same thing that everyone in batch one received. I've been talking with Yoshi and he is very busy right now flying across the globe but he recommended that I create a timeline and send it to BITMAIN CS, and that is what I'm going to do. I am trying to work with BITMAIN to reach a resolution that is FAIR to both parties, so I can feel comfortable enough to continue to do business with BITMAIN in the future, because I truly believe that they are probably the best, most honest ASIC manufacturers, but for the past three weeks my experience with the company has been nothing like it was in the past. I still have hope that they will understand that by compensating me a small amount, they will be much better off as they wont lose me as a customer, and I will continue to purchase hardware from them. Seems like a no-brainier to me...
 

I'll get back to you on a CN address.

JUST LIKE TO ADD - 5 MONTHS AFTER PROMISING ACTUAL COMPENSATION FOR DAMAGED HARDWARE ("NO NEED TO RETURN'')

I TODAY RECEIVE - please kindly return the defective boards to below address, inform us the tracking number after ship out.
we'll process the refund once we get the defective boards.
thanks.

Name: Bitmain Warranty Address: 3700 quebec st. #100239 City: Denver, Colorado Post code: 80207 Country: USA Phone: 844-248-6246

I HAVE NEVER DEALT WITH USA BITMAIN, AND WHY WOULD I WHEN I AM MERE HOURS FROM CHINA??

IS THIS YET ANOTHER FEEBLE AND ACTUALLY PATHETIC ATTEMPT TO NOT PAY OUT THE MONEY OWED FOR SENDING BROKEN HARDWARE ON NEARLY A DOZEN SEPARATE OCCASIONS?



Mr Green Hat - change your tune much?

when they 'maybe' get around to helping you out, will you again bend over backwards to scream how awesome they actually are??

Trust me, I have been MORE than polite in the past in my communications with BITMAIN. I have been civil in my emails, despite the ridiculous responses I receive. They have not replied to my emails for several days now, so my patience kind of wore thin.  I've dealt with BITMAIN CS before and have never had this kind of problem, and when they stop communicating with me, what else am I left to do? Continue  to send them polite emails asking for the compensation that is owed to me, knowing full well that they aren't going to respond?

Believe me, if BITMAIN would have compensated me as promised in this thread, I would never have posted on this forum today, but what other options do I really have? I have tried stepping back, apologizing, and starting over SEVERAL times with these guys, and it seems like they are satisfied once they feel that I am going to shut up about the way they have treated me as a customer (promising compensation, only to deny it days later). Tell me, if you were me, how would you go about reaching out to BITMAIN? Emailing Yoshi? tried that. he won't respond. Email Tim? Same result. Email [email protected]? Ha, well if you are suggesting that to me, I know for a FACT that you have never dealt with BITMAIN CS, as nothing has EVER been resolved for me (or anyone else who I'm aware of, FTM) via sending an email to those guys, although I have [sent them email(S)], and I was polite.


EDIT: I just sent Yoshi another email calmly explaining my situation, citing the facts (specifically BITMAIN's post promising 10 days worth of compensation). In the past, he has successfully helped me get over some headaches caused by BITMAIN CS, hopefully that will be the case here.

I got double what Spondoolies gave you .

8d2cde0aa33c77b902146359616bec536149a0fac6c43a5e4083920b4330e30e

Flash firmware, then reimage SD card if still not working. I doubt either will fix the problem but its the first place to start. As you say, it sounds like something temperature based because its time based. Are the module temps okay? Could be PSU's temperature sensor, is the PSU intake vent clear?

MrGreenHat, in all honesty, nobody whose attention you're trying to attract will read your walls of text with bolds and capitals. State your case succinctly and use facts only, not your feelings or expectations, and you'll get a lot more traction.

If you did the same thing communicating with Bitmain like you're doing here you might want to step back, apologize, and start over. That might get you somewhere. Their CS is fairly reasonable to deal with and if you have a case they should be able to see that.

well thank you, sir, you have told me outright that I won't be receiving any compensation from BITMAIN. I was going to order 2 more S4s and several S3+s, but you, personally, have guaranteed me that I will not be receiving the compensation that is due to me, and was PROMISED in this very thread (see BITMAIN post in reference to 10 day compensation). I am never doing business with BITMAIN again. If they don't have enough sense to realize that PAYING YOU to represent them is the worst idea in history, they don't deserve my business. Good luck staying in business for another year treating your customers like shit, BITMAIN.
this is why I will never buy another piece of hardware from BITMAIN again, and will be giving Spondoolies my business in the future. I hope you enjoyed losing a valuable customer, BITMAIN.

How much BTC they are compensated ?
I ask because today I received a notice of SP20 compensation from spondoolies.

...Thank you for your purchase of the SP20 mining machine.

As you know, shipment of the SP20 was delayed beyond our promised October date.
Because we place high value on our customer relationships, we are compensating
customers whose delivery was affected.

We are offering 0.12 BTC per machine for the delay in shipment....

PROBLEM with S4 shipped two weeks ago:

Room temp: 60-70 F
Other 3 machines: Working fine
Problem: Runs for 2-3 hours, then the LCD lights up blue but blank. I have tried killing the power and then plugging it back in again, and it runs up to ~250 gH for a few minutes and then back to 0 gH/s. It is all updated. It keeps hashing momentarily at 1.8-1.9 then immediately drops to 0 gH/s.

Possibly bad sensor that thinks it's overheating? I have no idea.

What should I do? Flash firmware? Is this OK to do?

Just a heads up … I was a batch one customer… I also had a PSU that went defective after a week of run time. Bitmain did everything they said they would… They sent me a replacment PSU for ALL batch 1 units and also sent me 10 day mining compensation for the unit that died … It took a while to get resolved, but in the end, they did everything they said they would . I have 4 S4's and honestly with the latest firmware, I have no complaints . I would have no issue buying another S4 …

I also have 1024 coupons for the S3… if ANYONE wants a free coupon send me your Bitmain ID and I will give you a coupon free of charge . There is no way I will buy 1024 S3's as much as I would like to, I just don't have the funds .

You can say negative things all you like as long as they are legal, but for the third time - its not going to help you get what you want. I'm not even specifically talking about this situation or Bitmain either. You can't do what you're doing and expect someone to be swayed to your views at the same time - they're mutually exclusive.

I said it was okay last time because you had already apologised and deleted what you were apologising for. At this point you've posted more abuse and threats, are continuing to do the same, are a million miles way from apologising yet still expect the same outcome as last time. That's not going to happen.

Dogie, I have been civil for almost a month now. A person can only be SO patient. And I have been.

I have also noticed that you have contradicted yourself in this very thread:



So, if you don't mind me asking, which is it? If I play nice and don't post anything on these forums that suggest anything negative about BITMAIN, am I going to get better results? Or can I be honest and post the truth on these forums without fear of being discriminated against by CS? Because a few weeks ago you said it wouldn't matter that I got angry, but now you are saying it's not going to help. You seem to have the same issue that Bitmain has,  consistency. No wonder you guys work so well together.

EDIT: I just noticed that you referred to my behavior as "abusive". Tell me, exactly how am I being "abusive"? If anything, I'm being abused by BITMAIN's awful business practices. You seem to be adding flames to the fire. And the only "threats" I made were to disclose the TRUTH about the way that BITMAIN operates. You are acting like I made a post saying that I was going to fly to China and become violent in person. How can you not understand why someone in my situation would be this frustrated? No information that you have supplied since my first post this afternoon has been at all helpful, instead it has just made me (a customer of BITMAIN) look like the bad guy, when its absolutely clear who is in the wrong here, and I would love for ANYONE to explain how that could possibly be me. Is this the way you were instructed by BITMAIN to handle CS issues? Tell the customers that its their fault for getting upset that BITMAIN lied to them? You do far more harm than good, Dogie. Stick to your tutorials and amazon.com reviews, because you are making yourself look foolish.

As I said in the last post, abuse and threats isn't going to get you closer to what you want. There is a minimum level of civility required in order to interact with another person and get a positive outcome. This applies to both online and in person transactions.

Imagine what the chances of a positive outcome would be if you walked into a brick and mortar store and accused the staff of metaphorically raping you and metaphorically fucking you over while being abusive and making threats. Certainly you'd be thrown out or have the cops called.

tldr, please take it down a notch

OK, so let me make sure I am understanding this correctly. It has been ALMOST a month since you made this post claiming that you would issue compensation to the value of 10 days of mining profit calculated from the shipping date.
I also see that it wasn't JUST Batch one S4s who were affected by DOA PSU's, but also the beginning of batch 2, which would apply to ME! My S4's PSU was DOA just like the ones in Batch one! It doesn't matter if "according to [your] records" you shipped me a "new" PSU, it still was dead on arrival! And I was CERTAINLY an early Batch 2 customer.
Go ahead and compensate me now so I can let everyone know that you guys actually did what you SAID you would do, instead of telling everyone that they would be compensated only to ignore their emails upon inquiry. I'm so fucking sick of waiting on this shit.

So why have I not received compensation for my lost mining time? I want an explanation, not an excuse.

This is pure bullshit, BITMAIN!
You're right, I apologize. I guess the adrenaline got to me. I have edited my original post to include all consecutive posts (which have now been deleted).

I didn't say that I was going to spam. How is telling the truth and making sure no one else gets screwed by BITMAIN "spamming"? maybe if you were referring to my several consecutive posts, I might understand, but I realized that did look kind of "spammy" (with the help of ckolivas) so I have taken the action necessary to resolve that. At this point, I KNOW I am not going to receive compensation from BITMAIN. What I am doing is EXPOSING THEM FOR THE LIARS THAT THEY ARE. Look at the post that I quoted at the beginning of this from BITMAIN, mid-October. If that isn't blatant bullshit, I don't know what is.

[This comment is directed at Dogie, not Tupsu]So are you telling me I should just lie over and let them fuck me? And keep my mouth shut while they metaphorically rape me? That's not the kind of person I am. If I'm not going to receive my compensation, I'm atleast going to make sure that BITMAIN doesn't continue to profit from their half-truths and empty promises. Call me a spammer, dogie, if you want, but I call it doing the right thing. In fact, Dogie, I'm not sure why you even found it necessary to reply, as you have proven to be of absolutely no help (other than being the official punching bag for BITMAIN on this forum). Unless you can offer a solution that will HELP my situation, it's probably better off if you use those quick fingers of yours to type up more Amazon.com reviews. If you haven't realized it, yet, you seem to annoy more than assist. I'm not sure what BITMAIN is paying you for, exactly, but they would be better off if they took the funds that they pay you with and compensated their frustrated customers instead. Just a thought.

Are you really believed  compensation in BTC ?

Bitmain pays compensation only coupons. Leave it in your mind forever.


Does anyone know of anyone who has received compensation for  lost mining time from BITMAIN ?

There is no need to believe in their written below in red. This is simply not true.

If you do not believe me, believe their's Spokesperson


I've bought from them in the last year miners over  80 BTC, and did not get  compensation for Batch2 S4 which was posted on the old power supply.
My miner worked until the arrival of the new PSU, with EVGA SUPERNOVA 1300G2  PSU, and only 1600GH/s.

N.B. Free give away more than 100 S3 coupon