Any word on amd vega hash rates? - page 136.

badfad

jr. member

Activity: 186

Merit: 4

Quote from: rednoW on September 11, 2017, 03:02:02 AM

But if you pay for electricity then air cooling is ok, even rx vega 56, just run at 130-160watt and forget about dual-mining.
I have no vega 56 yet but I see no problems in flashing it with vega 64 bios and apply proper tuning then.

Thank you so much, my 56 now is doing 1585H/s. Previously it did only 1275 Max. This is with the blockchain drivers, and 64 bios flashed.

+1 to liquid cooling for vega, this card likes to throttle above 70, while it obviously isn't for mining farms, my pc will love 2 vegas on cooling.

plbartie

member

Activity: 76

Merit: 10

ALTCOM wallet: AYGDb1Zwf3vfs2xC4D1G63wwy9RLU5Kb5r

Quote from: freak1 on September 11, 2017, 05:31:34 AM

I have 2 PCs with both 2x MSI RX vega 64 8GB both cannot use the blockchain driver, it shows grey artifactes on the whole screen on both PC, a few secunds after claymore miner starts. With only 1 card running there is no problem. Anyone have a fix for this?

Did you overclock it at all? or just stock?

freak1

newbie

Activity: 47

Merit: 0

I have 2 PCs with both 2x MSI RX vega 64 8GB both cannot use the blockchain driver, it shows grey artifactes on the whole screen on both PC, a few secunds after claymore miner starts. With only 1 card running there is no problem. Anyone have a fix for this?

GLDFY

newbie

Activity: 41

Merit: 0

Quote from: rokerjtrolol on September 11, 2017, 02:51:07 AM

i am planning to get vega because there are no rx5xx available here , my question is should i go with msi vega 56 ref card which costs 750$ or msi vega 64 liquid which costs 1000$ , can vega56 outperform or equal to 64 after bios flash in mining? power is green and cheapest here so its not an issue.

I got MSI VEGA 64 (air cooling) and it did not survive even the first night mining. I had a warranty so I should be getting a new one soon. Will give it another chance. But so far not so good.

Django69

newbie

Activity: 74

Merit: 0

Quote from: CharlieCox on September 11, 2017, 04:26:04 AM

Quote from: rednoW on September 11, 2017, 02:28:41 AM

Need your kisses ))

Sending you lots of Kiss

https://s26.postimg.org/hr05mwl7t/Screen_Shot_2017-09-11_at_11.12.26.png

can you share your config file?

thanks

plbartie

member

Activity: 76

Merit: 10

ALTCOM wallet: AYGDb1Zwf3vfs2xC4D1G63wwy9RLU5Kb5r

So it looks like vega is not very profitable at the moment. The prices for these cards in my country is insane. Might wait for prices to come down before I give it a try.

CharlieCox

member

Activity: 212

Merit: 12

Quote from: rednoW on September 11, 2017, 02:28:41 AM

Need your kisses ))

Sending you lots of Kiss

rokerjtrolol

newbie

Activity: 5

Merit: 0

Quote from: rednoW on September 11, 2017, 03:02:02 AM

If power is not an issue you should better go with liquid cooling and run dual @ 300 watt.
300watt is to much for reference air cooling.
But if you pay for electricity then air cooling is ok, even rx vega 56, just run at 130-160watt and forget about dual-mining.
I have no vega 56 yet but I see no problems in flashing it with vega 64 bios and apply proper tuning then.

Thanks for help, i think i will order vega 56 for now and later liquid vega 64 if things turns out good. Grin

rednoW

legendary

Activity: 1510

Merit: 1003

If power is not an issue you should better go with liquid cooling and run dual @ 300 watt.
300watt is to much for reference air cooling.
But if you pay for electricity then air cooling is ok, even rx vega 56, just run at 130-160watt and forget about dual-mining.
I have no vega 56 yet but I see no problems in flashing it with vega 64 bios and apply proper tuning then.

rokerjtrolol

newbie

Activity: 5

Merit: 0

Quote from: rednoW on September 11, 2017, 02:28:41 AM

Quote from: CharlieCox on September 11, 2017, 02:20:46 AM

Quote from: sacen on September 10, 2017, 06:22:09 PM

Quote from: CharlieCox on September 08, 2017, 02:46:23 AM

I have two Vega 64 cards now, same settings same everything. One is capable of 1250 H/s on Monero, the second one can go to 1580 H/s o.O

Would you mind sharing your settings?

After a reboot, I am not able to reproduce the 1580 H/s score

Both cards run between 1250 and 1280 H/s. Just standard Wattman settings, core as low as possible, mem to 1100, temp limit 71℃, -5% power. However, this is not enough to reduce the power draw at the wall.

We need to give rednoW some motivation to share his guide with us. A kiss won't be enough I assume.

To get back 1600h/s xmr stop your miner, go to radeon settins, gaming and move HBCC slider slightly, then hit apply.
Then run you miner again, here you go again ))
Need your kisses ))

i am planning to get vega because there are no rx5xx available here , my question is should i go with msi vega 56 ref card which costs 750$ or msi vega 64 liquid which costs 1000$ , can vega56 outperform or equal to 64 after bios flash in mining? power is green and cheapest here so its not an issue.

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: CharlieCox on September 11, 2017, 02:20:46 AM

Quote from: sacen on September 10, 2017, 06:22:09 PM

Quote from: CharlieCox on September 08, 2017, 02:46:23 AM

I have two Vega 64 cards now, same settings same everything. One is capable of 1250 H/s on Monero, the second one can go to 1580 H/s o.O

Would you mind sharing your settings?

After a reboot, I am not able to reproduce the 1580 H/s score

Both cards run between 1250 and 1280 H/s. Just standard Wattman settings, core as low as possible, mem to 1100, temp limit 71℃, -5% power. However, this is not enough to reduce the power draw at the wall.

We need to give rednoW some motivation to share his guide with us. A kiss won't be enough I assume.

To get back 1600h/s xmr stop your miner, go to radeon settins, gaming and move HBCC slider slightly, then hit apply.
Then run you miner again, here you go again ))
Need your kisses ))

CharlieCox

member

Activity: 212

Merit: 12

Quote from: sacen on September 10, 2017, 06:22:09 PM

Quote from: CharlieCox on September 08, 2017, 02:46:23 AM

I have two Vega 64 cards now, same settings same everything. One is capable of 1250 H/s on Monero, the second one can go to 1580 H/s o.O

Would you mind sharing your settings?

After a reboot, I am not able to reproduce the 1580 H/s score

Both cards run between 1250 and 1280 H/s. Just standard Wattman settings, core as low as possible, mem to 1100, temp limit 71℃, -5% power. However, this is not enough to reduce the power draw at the wall.

We need to give rednoW some motivation to share his guide with us. A kiss won't be enough I assume.

rokerjtrolol

newbie

Activity: 5

Merit: 0

Quote from: Shnikes101 on August 25, 2017, 08:48:53 AM

There's plenty of people tinkering with Vega. It still has potential.

I switched back over to the 8/23 beta mining drivers. Current stats -
ETH Only - +50 power. 1137 core/p900. 1000 mem/p900 - making 39.5 mh/s ETH @ 303 watts - total system power. Avg. 1 minute ETH = 35.5 mh/s

Dual Mine - +50 power. 1137 core/p900. 1000 mem/p900 - making 39 mh/s ETH and 2700 mh/s DCR @ 424 watts - total system power. Avg. 1 minute ETH = 33 mh/s

Definitely still has some driver and power management issues

sir that was some gr8 info i was looking for all over the place.
i am thinking of getting vega64/56 but unable to find proper info regarding hashrates with oc etc

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: killerelite on September 10, 2017, 10:23:42 PM

Quote from: rednoW on September 08, 2017, 05:06:59 AM

My new best results with my vega64 liquid after moving to win10 and blockchain drivers

xmr - 1570h/s@130watt
eth - 44mhs@160watt
zec - 560sol - wattage didn't remember

dual eth+lbc still no improvements 41+220 at 230watt
it is old result with 17.8.2 driver on win7
Having stability issues with dual mode on win10 with blockchain drivers.
It works with default voltages and speed is good 43eth+240lbc but consumption is huge.
When I'm trying to apply downvolt setup that works well under win7 17.8.2 drivers or with xmr or pure eth with blockchain drivers - it simply hangs.
Maybe I need to give it more voltage ... but I don't like this way ))

This make Monero quite a lot more profitable to mine then eth,well if monero and eth maintain their price.
I am considering buying vega series cards , anyways is the extra bucks for liquid worth it ?

liquid needed for dualmining only cause you will need 300w for 43eth/220lbry (43eth/2800dcr).
For xmr and eth only (130w and 160w) air version is just enough.
BUT! You'll get this numbers only after special tuning that is not available public yet!
With std settings or just playing with wattman you'll get worse results.

killerelite

full member

Activity: 205

Merit: 100

Quote from: rednoW on September 08, 2017, 05:06:59 AM

My new best results with my vega64 liquid after moving to win10 and blockchain drivers

xmr - 1570h/s@130watt
eth - 44mhs@160watt
zec - 560sol - wattage didn't remember

dual eth+lbc still no improvements 41+220 at 230watt
it is old result with 17.8.2 driver on win7
Having stability issues with dual mode on win10 with blockchain drivers.
It works with default voltages and speed is good 43eth+240lbc but consumption is huge.
When I'm trying to apply downvolt setup that works well under win7 17.8.2 drivers or with xmr or pure eth with blockchain drivers - it simply hangs.
Maybe I need to give it more voltage ... but I don't like this way ))

This make Monero quite a lot more profitable to mine then eth,well if monero and eth maintain their price.
I am considering buying vega series cards , anyways is the extra bucks for liquid worth it ?

sacen

newbie

Activity: 6

Merit: 0

Quote from: CharlieCox on September 08, 2017, 02:46:23 AM

Quote from: Jackkyy on September 07, 2017, 08:53:24 AM

zcash and other altcoins stats
if possible

I have two Vega 64 cards now, same settings same everything. One is capable of 1250 H/s on Monero, the second one can go to 1580 H/s o.O

https://s26.postimg.org/7gveyhagp/Screen_Shot_2017-09-08_at_09.34.46.png

Would you mind sharing your settings?

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: AzCrTe on September 10, 2017, 12:16:51 PM

Anyone have any joy to get the blockchain drivers to work on Windows 7-64? I cannot stand 10 not even if it did 100Mhs. When I install it on 7-64 I get snow on screen and reboots - rinse, wash, repeat.

No, blockchain drivers don't work on win7 with vega. Even robinhood version.
But 17.8.2 are not bad at all on win7. Check my posts for results.

AzCrTe

member

Activity: 98

Merit: 10

Anyone have any joy to get the blockchain drivers to work on Windows 7-64? I cannot stand 10 not even if it did 100Mhs. When I install it on 7-64 I get snow on screen and reboots - rinse, wash, repeat.

Django69

newbie

Activity: 74

Merit: 0

Quote from: rednoW on September 10, 2017, 09:53:21 AM

Quote from: patriotmemory on September 10, 2017, 09:36:07 AM

@rednoW, would you mind explaining step by step how you are getting undervolt to work with the blockchain drivers? I've tried fiddling with command line switches and wattman settings and can't seem to get them to stick. I'm running 5x Vega 64 at the moment and getting 41.5Mh on the blockchain drivers but I'm running 960/1025/-10%/65C fan target so my power consumption is very high.

well, I think currently this guide doesn't exist and I need some motivation to write it ))

i give you a kiss Shocked

rednoW

legendary

Activity: 1510

Merit: 1003

Quote from: patriotmemory on September 10, 2017, 09:36:07 AM

@rednoW, would you mind explaining step by step how you are getting undervolt to work with the blockchain drivers? I've tried fiddling with command line switches and wattman settings and can't seem to get them to stick. I'm running 5x Vega 64 at the moment and getting 41.5Mh on the blockchain drivers but I'm running 960/1025/-10%/65C fan target so my power consumption is very high.

well, I think currently this guide doesn't exist and I need some motivation to write it ))

Topic: Any word on amd vega hash rates? - page 136. (Read 202748 times)