ASICMiner Tube Group Buy #2 - page 20.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: Finksy on August 17, 2014, 09:09:18 PM

How many extra units do you have coming & available left to buy for the GB?

Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic. Sad

there's plenty available. the title is still OPEN, so you can order more.
when my inventory depletes, I will post that here, so that it will be clearly communicated.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: cesarm on August 17, 2014, 06:48:41 PM

Quote from: CanaryInTheMine on August 17, 2014, 03:47:15 PM

Quote from: helipotte on August 17, 2014, 11:31:57 AM

Is this GB over? I sent payment on the 16th, did I miss the deadline?

Thanks!

Nope, you're good. My order to fc went in by 16th.

I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL.
So I expect these in a few days after DHL number is provided.

How many you ordered ?

enough for a good size group.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: WBF1 on August 18, 2014, 08:33:07 AM

Quote from: CanaryInTheMine on August 17, 2014, 03:42:49 PM

Quote from: WBF1 on August 17, 2014, 12:01:21 PM

Quote from: CanaryInTheMine on August 17, 2014, 07:35:23 AM

Quote from: sjc1490 on August 15, 2014, 03:56:28 PM

CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.

Here's the response from ASICMiner:

"its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)"

This is for the ethernet controller?

Yes. You could get an adapter from 6 pin pcie to barrel or from molex to barrel. Buyahash store sells them and you can always make your own and run from the same PSU powering the Tube.
You may also have an adapter from a switch/router etc... As long as it's 12 v out, minimum 1amp.

based on all info we have available, yes. as long as the molex you are connecting to provides 1 amp minimum.

presumably this was the right part: https://buyahash.com/shop/molex-4-pin-gridseed-power-plug-2-1mm-dc-barrel-plug/

??

WBF1

sr. member

Activity: 419

Merit: 250

Quote from: CanaryInTheMine on August 17, 2014, 03:42:49 PM

Quote from: WBF1 on August 17, 2014, 12:01:21 PM

Quote from: CanaryInTheMine on August 17, 2014, 07:35:23 AM

Quote from: sjc1490 on August 15, 2014, 03:56:28 PM

CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.

Here's the response from ASICMiner:

"its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)"

This is for the ethernet controller?

Yes. You could get an adapter from 6 pin pcie to barrel or from molex to barrel. Buyahash store sells them and you can always make your own and run from the same PSU powering the Tube.
You may also have an adapter from a switch/router etc... As long as it's 12 v out, minimum 1amp.

presumably this was the right part: https://buyahash.com/shop/molex-4-pin-gridseed-power-plug-2-1mm-dc-barrel-plug/

??

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: Finksy on August 17, 2014, 09:09:18 PM

How many extra units do you have coming & available left to buy for the GB?

Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic. Sad

canary in the mine has sold close to 1 million usd in gear on this site. I purchased thousands of dollars in gear from him.

he is pretty honest guy. and he sells to make some money. so most likely he has done a markup which is how a reseller does business.

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Payment for 1 sent

https://blockchain.info/tx/388209d2b2ded073beb9130a09e6fecded0be1e6e4da0d6105526542bd2ef062

firejuan

sr. member

Activity: 256

Merit: 250

Because it's sterile...

Quote from: Finksy on August 17, 2014, 09:09:18 PM

How many extra units do you have coming & available left to buy for the GB?

Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic.

You have barely been around a month. This place CAN be a cesspool if you don't filter out the right people and avoid scams. I learned that the hard way. Yes, I got taken for ~$2,400 so make sure to stick with well known sellers such as Canary and avoid to good to be true deals because they are truly not true.

Speaking of trusted sellers...do you have any extra units, Canary, or will you be placing another order? I sat on the fence to long.

Finksy

legendary

Activity: 1022

Merit: 1003

How many extra units do you have coming & available left to buy for the GB?

Also, i hate to be the one to ask, but what's in it for you with this group buy? You don't seem to be marking them up any, are you just trying to get around the MOQ for an order from them? This forum has turned me into a cynic. Sad

sjc1490

hero member

Activity: 546

Merit: 500

Thanks, I am in TN so a regional box might be the way to go. Just one miner but thinking of adding another tomorrow if he is still accepting.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: sjc1490 on August 17, 2014, 04:52:57 PM

Quote from: CanaryInTheMine on August 17, 2014, 03:47:15 PM

Quote from: helipotte on August 17, 2014, 11:31:57 AM

Is this GB over? I sent payment on the 16th, did I miss the deadline?

Thanks!

Nope, you're good. My order to fc went in by 16th.

I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL.
So I expect these in a few days after DHL number is provided.

On the label do you think a large USPS Flat Rate box (square type) will work or should I wait till you have had a chance to put eyes on it? Thanks.

he is letting us wait on the labels. it may not get into a large . may need other packing. if you are close to him it fits in a usps region c box but that is expensive unless you are close. he is in Illinois I am in NJ and a regional c is 33 dollars. IIRC

I am hoping he can fit it in a smaller box. may fit into 2 regional b's

cesarm

member

Activity: 92

Merit: 10

Quote from: CanaryInTheMine on August 17, 2014, 03:47:15 PM

Quote from: helipotte on August 17, 2014, 11:31:57 AM

Is this GB over? I sent payment on the 16th, did I miss the deadline?

Thanks!

Nope, you're good. My order to fc went in by 16th.

I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL.
So I expect these in a few days after DHL number is provided.

How many you ordered ?

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: CanaryInTheMine on August 17, 2014, 03:47:15 PM

Quote from: helipotte on August 17, 2014, 11:31:57 AM

Is this GB over? I sent payment on the 16th, did I miss the deadline?

Thanks!

Nope, you're good. My order to fc went in by 16th.

I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL.
So I expect these in a few days after DHL number is provided.

On the label do you think a large USPS Flat Rate box (square type) will work or should I wait till you have had a chance to put eyes on it? Thanks.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: helipotte on August 17, 2014, 11:31:57 AM

Is this GB over? I sent payment on the 16th, did I miss the deadline?

Thanks!

Nope, you're good. My order to fc went in by 16th.

I have an internal tracking number that will get out order to Hong Kong, then it's picked up by DHL.
So I expect these in a few days after DHL number is provided.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: stompysteve on August 17, 2014, 12:08:55 PM

I need to get my power costs down before I buy one, electric bill is already to high Undecided

Turn off GPUs or any other less efficient (than this device) mining equipment.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: kp5995 on August 17, 2014, 02:07:18 PM

Are there any left in this GB

Yes, it's still open

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: WBF1 on August 17, 2014, 12:01:21 PM

Quote from: CanaryInTheMine on August 17, 2014, 07:35:23 AM

Quote from: sjc1490 on August 15, 2014, 03:56:28 PM

CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.

Here's the response from ASICMiner:

"its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)"

This is for the ethernet controller?

Yes. You could get an adapter from 6 pin pcie to barrel or from molex to barrel. Buyahash store sells them and you can always make your own and run from the same PSU powering the Tube.
You may also have an adapter from a switch/router etc... As long as it's 12 v out, minimum 1amp.

TheJuice

hero member

Activity: 845

Merit: 609

Quote from: WBF1 on August 17, 2014, 12:01:21 PM

Quote from: CanaryInTheMine on August 17, 2014, 07:35:23 AM

Quote from: sjc1490 on August 15, 2014, 03:56:28 PM

CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.

Here's the response from ASICMiner:

"its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)"

This is for the ethernet controller?

No. it's one of these: http://www.amazon.com/Power-Adapter-Supply-1000ma-Quality/dp/B005JRGOCM

the chips are powered by a psu, but the controller in powered by above.

kp5995

newbie

Activity: 36

Merit: 0

Are there any left in this GB

stompysteve

hero member

Activity: 574

Merit: 500

I need to get my power costs down before I buy one, electric bill is already to high Undecided

WBF1

sr. member

Activity: 419

Merit: 250

Quote from: CanaryInTheMine on August 17, 2014, 07:35:23 AM

Quote from: sjc1490 on August 15, 2014, 03:56:28 PM

CanaryInTheMine,
Lining up PSU etc. and I noticed that in the unit that Dogie does the guide on a separate barrel type power connector like used on some lcd screens is needed for the controller card. Is that the case for this one. Trying to have everything in place for before ships, thanks.

Here's the response from ASICMiner:

"its 12V 1A, 2.1mm (actually 2.5mm is also available ,its compatible)"

This is for the ethernet controller?

Topic: ASICMiner Tube Group Buy #2 - page 20. (Read 37954 times)