Pages:
Author

Topic: ASICMiner Tube Group Buy #2 - page 18. (Read 37938 times)

donator
Activity: 2352
Merit: 1060
between a rock and a block!
August 20, 2014, 05:37:02 PM
Canary can you confirm my payment from yesterday 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

Also do you have an idea of final box size so I can print an international shipping label? They're bound to be a bit pickier about dimensions than domestic.

It's in the ledger: https://blockchain.info/tx/2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

so you should be all set.


As for the box size, I'm hoping medium box 2, Inside dimensions are 13 5/8" x 11 7/8" x 3 3/8"

Based on the assembled pictures, it is barely larger than 120mm (the fan size) in width/height. 120mm is 4.72in, lets say 5in. You could fit heatsinks/boards across. The question is when 2 are stacked will in be to tall. I'd wait until canary fiddles with it.
many things depend on packaging. for example, today I got the BE Ethernet controller with a few RockMiner T1 units.  the controller is in it's own foam packaging, thus increasing total volume it takes up in the box.  I suspect the rest of the components are going to have individual packaging too. so when all put together, medium might be dangerous.

I've had some conversations with Phasebird and he gave me a list of dimensions of components but the number of items on that list exceeds the number of items per friedcat's post.  so it's possible some components are packaged as two items etc... it was a list in Chinese, which he translated but it wasn't clear... I've not been able to get more info from ASICMiner on volume of 1 unit subsequently, so to give you a precise answer is not yet possible.

I did contact another forum member who has already received some units from fc.  His/her opinion is that 1 unit will be fine in a large box.  it may be unwise to squeeze everything into a medium box, per their opinion.  Once I have them, I'll know for sure but it could very well end up being a large box.

For multiple units, maybe region C would work, but there's a weight limit on C also... (exceeding that limit renders Priority shipping useless).

Hmmm.  FedEx?  Might be one large box per unit?  I guess we'll find out.
FedEx doesn't care what box you use...  they adjust the charge based on measured weight and bill your account.  I can slap a fedex label on USPS box and they'll take it Smiley
legendary
Activity: 1593
Merit: 1004
August 20, 2014, 05:31:27 PM
Canary can you confirm my payment from yesterday 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

Also do you have an idea of final box size so I can print an international shipping label? They're bound to be a bit pickier about dimensions than domestic.

It's in the ledger: https://blockchain.info/tx/2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

so you should be all set.


As for the box size, I'm hoping medium box 2, Inside dimensions are 13 5/8" x 11 7/8" x 3 3/8"

Based on the assembled pictures, it is barely larger than 120mm (the fan size) in width/height. 120mm is 4.72in, lets say 5in. You could fit heatsinks/boards across. The question is when 2 are stacked will in be to tall. I'd wait until canary fiddles with it.
many things depend on packaging. for example, today I got the BE Ethernet controller with a few RockMiner T1 units.  the controller is in it's own foam packaging, thus increasing total volume it takes up in the box.  I suspect the rest of the components are going to have individual packaging too. so when all put together, medium might be dangerous.

I've had some conversations with Phasebird and he gave me a list of dimensions of components but the number of items on that list exceeds the number of items per friedcat's post.  so it's possible some components are packaged as two items etc... it was a list in Chinese, which he translated but it wasn't clear... I've not been able to get more info from ASICMiner on volume of 1 unit subsequently, so to give you a precise answer is not yet possible.

I did contact another forum member who has already received some units from fc.  His/her opinion is that 1 unit will be fine in a large box.  it may be unwise to squeeze everything into a medium box, per their opinion.  Once I have them, I'll know for sure but it could very well end up being a large box.

For multiple units, maybe region C would work, but there's a weight limit on C also... (exceeding that limit renders Priority shipping useless).

Hmmm.  FedEx?  Might be one large box per unit?  I guess we'll find out.
donator
Activity: 2352
Merit: 1060
between a rock and a block!
August 20, 2014, 05:13:32 PM
Canary can you confirm my payment from yesterday 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

Also do you have an idea of final box size so I can print an international shipping label? They're bound to be a bit pickier about dimensions than domestic.

It's in the ledger: https://blockchain.info/tx/2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

so you should be all set.


As for the box size, I'm hoping medium box 2, Inside dimensions are 13 5/8" x 11 7/8" x 3 3/8"

Based on the assembled pictures, it is barely larger than 120mm (the fan size) in width/height. 120mm is 4.72in, lets say 5in. You could fit heatsinks/boards across. The question is when 2 are stacked will in be to tall. I'd wait until canary fiddles with it.
many things depend on packaging. for example, today I got the BE Ethernet controller with a few RockMiner T1 units.  the controller is in it's own foam packaging, thus increasing total volume it takes up in the box.  I suspect the rest of the components are going to have individual packaging too. so when all put together, medium might be dangerous.

I've had some conversations with Phasebird and he gave me a list of dimensions of components but the number of items on that list exceeds the number of items per friedcat's post.  so it's possible some components are packaged as two items etc... it was a list in Chinese, which he translated but it wasn't clear... I've not been able to get more info from ASICMiner on volume of 1 unit subsequently, so to give you a precise answer is not yet possible.

I did contact another forum member who has already received some units from fc.  His/her opinion is that 1 unit will be fine in a large box.  it may be unwise to squeeze everything into a medium box, per their opinion.  Once I have them, I'll know for sure but it could very well end up being a large box.

For multiple units, maybe region C would work, but there's a weight limit on C also... (exceeding that limit renders Priority shipping useless).
member
Activity: 69
Merit: 10
August 20, 2014, 04:48:33 PM
One more for me canary, Grin

tx:https://blockchain.info/tx/37bb92988569eec27a0cb3dff8faf9646acc3051b2dd6c68819409fe00ff26b5

Thanks!
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
August 20, 2014, 02:20:38 PM
Canary can you confirm my payment from yesterday 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

Also do you have an idea of final box size so I can print an international shipping label? They're bound to be a bit pickier about dimensions than domestic.

It's in the ledger: https://blockchain.info/tx/2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

so you should be all set.


As for the box size, I'm hoping medium box 2, Inside dimensions are 13 5/8" x 11 7/8" x 3 3/8"

Based on the assembled pictures, it is barely larger than 120mm (the fan size) in width/height. 120mm is 4.72in, lets say 5in. You could fit heatsinks/boards across. The question is when 2 are stacked will in be to tall. I'd wait until canary fiddles with it.

yeah I know if I order 2 and use a regional c box I would need a 33 dollar label with no extra insurance.

but if 1 fits in a region b box  it is about 9 + 9 = 18 for 2 units  .

I am delaying a 2nd miner due to this. I think I am going to order a 2nd  one .  He has about 60 paid for so far.
hero member
Activity: 843
Merit: 608
August 20, 2014, 01:33:36 PM
Canary can you confirm my payment from yesterday 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

Also do you have an idea of final box size so I can print an international shipping label? They're bound to be a bit pickier about dimensions than domestic.

It's in the ledger: https://blockchain.info/tx/2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

so you should be all set.


As for the box size, I'm hoping medium box 2, Inside dimensions are 13 5/8" x 11 7/8" x 3 3/8"

Based on the assembled pictures, it is barely larger than 120mm (the fan size) in width/height. 120mm is 4.72in, lets say 5in. You could fit heatsinks/boards across. The question is when 2 are stacked will in be to tall. I'd wait until canary fiddles with it.
legendary
Activity: 1022
Merit: 1003
August 20, 2014, 11:44:28 AM
Canary can you confirm my payment from yesterday 2e29590e184efc179b08c22d8c10a68da980727b20570293901b3c598e088bf1

Also do you have an idea of final box size so I can print an international shipping label? They're bound to be a bit pickier about dimensions than domestic.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
August 20, 2014, 11:37:28 AM
One more for hosting.

aec7e9e57f7c9db7d111de460ba631ea67852171df70ff6bc872d29a0efeb646-000

I have to reserve some space for a couple guys' minion boards, and have one more customer discussing a load, so I'm gonna have to say we're at capacity and won't be taking in any more Tubes to host.
hero member
Activity: 816
Merit: 1000
August 20, 2014, 11:29:05 AM
In for 1:
47bc1a992495cf981124ab72810e4d940d6e13d49b4c11c59ad51376980befa7
hero member
Activity: 843
Merit: 608
August 20, 2014, 11:25:03 AM

By the way, do you have any idea how long they might last?  Any ideas when you might run out?
I will post when I begin running out of them

Thinking  about ordering 1 more so when will this arrive at your place Wed or Thur ?


hopefully by Thursday, but once I know this for sure from DHL, I will post concrete dates here once I have them.

 Not trying to be pushy but I'm wondering if you will be able ship them out on the day you receive them?  I'm in the US until monday... I would love to be able to carry them over the border myself Wink
 


In his past group buys he has shipped out sameday.

Looks like most of us will get them by Monday.
full member
Activity: 140
Merit: 101
August 20, 2014, 04:41:15 AM
Can't believe I just saw this. Have to ask, any left Canary?
sr. member
Activity: 256
Merit: 250
Because it's sterile...
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
August 20, 2014, 01:31:05 AM
And another one for hosting

5387e1cc593e880e67c53df7ea6373e0bbec18acb5fa796d81a5772ee04fbad8-000
legendary
Activity: 3808
Merit: 7912
August 19, 2014, 09:16:05 PM

By the way, do you have any idea how long they might last?  Any ideas when you might run out?
I will post when I begin running out of them

Thinking  about ordering 1 more so when will this arrive at your place Wed or Thur ?


hopefully by Thursday, but once I know this for sure from DHL, I will post concrete dates here once I have them.

 Not trying to be pushy but I'm wondering if you will be able ship them out on the day you receive them?  I'm in the US until monday... I would love to be able to carry them over the border myself Wink
 
sr. member
Activity: 419
Merit: 250
August 19, 2014, 09:03:13 PM
This is getting exciting.

Ps. I love how he wanted funds by 8/16 and the majority roll in after the fact haha
hero member
Activity: 644
Merit: 500
Inspired
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
August 19, 2014, 07:23:06 PM
4 more for hosting here. I'll update the transaction once everything clears.

4.16BTC, txID 17e3a295fc4a757ddf9e9a836bd4b05ca704a86a48b396db67296ba7024945a7-000
donator
Activity: 2352
Merit: 1060
between a rock and a block!
August 19, 2014, 04:01:41 PM

By the way, do you have any idea how long they might last?  Any ideas when you might run out?
I will post when I begin running out of them

Thinking  about ordering 1 more so when will this arrive at your place Wed or Thur ?


hopefully by Thursday, but once I know this for sure from DHL, I will post concrete dates here once I have them.
donator
Activity: 2352
Merit: 1060
between a rock and a block!
August 19, 2014, 03:57:46 PM
Added a fourth miner Canary.  Tx: 1d42e4913204f1ca11c191369a727eef12256c51819699cef85770cafa851d78
Please confirm when you can.
thanks! it's on the ledger: https://blockchain.info/tx/1d42e4913204f1ca11c191369a727eef12256c51819699cef85770cafa851d78
donator
Activity: 2352
Merit: 1060
between a rock and a block!
August 19, 2014, 03:56:23 PM
Canary,
Just ordered a second
b833ef1843ea44410e2e3c57ec65bf1b152d9c4a281391a1f8d0a37bc87e195c
Please confirm.
Sure, it's on the ledger: https://blockchain.info/tx/b833ef1843ea44410e2e3c57ec65bf1b152d9c4a281391a1f8d0a37bc87e195c
Pages:
Jump to: