ASICPuppy.net - Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH - page 19.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Also, for those receiving their units today, I've been informed by Rockminer that the RKBOX cgminer build should work. I will be packaging my own stripped down Windows build and providing a Windows installer package tonight.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: philipma1957 on September 11, 2014, 10:45:56 AM

Quote from: CrazyGuy on September 11, 2014, 10:41:05 AM

Quote from: philipma1957 on September 11, 2014, 10:15:28 AM

Just got the r-box note not r-boxes the rPi the breakout board. all in a medium box.

So I am short 1 r-box and I paid 33 in postage for a medium flat rate.

I ship a lot and I know mistakes get made. So I figure I need a refund of 109.95 .

EDIT

Now I just went to post office website.
It looks like you sent 2 boxes 1 is lost.

At lease the one that came has the rasp pi in it.

I am going to make an effort to set this up tonight.

Get some flat rate regional a, b, c boxes Even though the regional c box costs more then it should . It would be just one box my zip is 07731 your zip is 75035

Yeh, I shipped in separate packages. Every once in a while USPS will split package buddies up and deliver on separate days.

Don't feel bad. but offering a larger little bit more expensive regional c is something to think about. (optional offer)

I will stop at the local post office with tracking info on both to

complain. If you can do the same on your end things speed up some of the time.
At least the one with the rasp pi and 1 r-box was the one that came. I can set it up tonight and wait for the second one tomorrow.

If your blood pressure is running dangerously low, I suggest the best natural method of getting a quick spike involves speaking over the phone with a USPS representative. After a 30 min to 1hr wait, they will tell you a priority package is only considered late after 5 days. You may get lucky going to your local post office if the package is sitting there, but I wouldn't waste my time calling them unless you are feeling faint and your Systolic is lower than 90. No worries though, if the second package is indeed lost, I'll refund you and deal with them directly on a claim.

Region C's were great for up to 7 Gen1 blades and a backplane, but I haven't had many instances lately where the cost benefit persuades me to use them. They may be perfect for 3-4 unit orders though.

Tonight I will create a coupon code for those that want to provide their own shipping label for Region C's and the like. Please note that I can not guarantee shipment within 24 hours when I am dependent on the customer for labels or carriers other than USPS are used.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: CrazyGuy on September 11, 2014, 10:41:05 AM

Quote from: philipma1957 on September 11, 2014, 10:15:28 AM

Just got the r-box note not r-boxes the rPi the breakout board. all in a medium box.

So I am short 1 r-box and I paid 33 in postage for a medium flat rate.

I ship a lot and I know mistakes get made. So I figure I need a refund of 109.95 .

EDIT

Now I just went to post office website.
It looks like you sent 2 boxes 1 is lost.

At lease the one that came has the rasp pi in it.

I am going to make an effort to set this up tonight.

Get some flat rate regional a, b, c boxes Even though the regional c box costs more then it should . It would be just one box my zip is 07731 your zip is 75035

Yeh, I shipped in separate packages. Every once in a while USPS will split package buddies up and deliver on separate days.

Don't feel bad. but offering a larger little bit more expensive regional c is something to think about. (optional offer)

I will stop at the local post office with tracking info on both to

complain. If you can do the same on your end things speed up some of the time.
At least the one with the rasp pi and 1 r-box was the one that came. I can set it up tonight and wait for the second one tomorrow.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: philipma1957 on September 11, 2014, 10:15:28 AM

Just got the r-box note not r-boxes the rPi the breakout board. all in a medium box.

So I am short 1 r-box and I paid 33 in postage for a medium flat rate.

I ship a lot and I know mistakes get made. So I figure I need a refund of 109.95 .

EDIT

Now I just went to post office website.
It looks like you sent 2 boxes 1 is lost.

At lease the one that came has the rasp pi in it.

I am going to make an effort to set this up tonight.

Get some flat rate regional a, b, c boxes Even though the regional c box costs more then it should . It would be just one box my zip is 07731 your zip is 75035

Yeh, I shipped in separate packages. Every once in a while USPS will split package buddies up and deliver on separate days.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Just got the r-box note not r-boxes the rPi the breakout board. all in a medium box.

So I am short 1 r-box and I paid 33 in postage for a medium flat rate.

I ship a lot and I know mistakes get made. So I figure I need a refund of 109.95 .

EDIT

Now I just went to post office website.
It looks like you sent 2 boxes 1 is lost.

At lease the one that came has the rasp pi in it.

I am going to make an effort to set this up tonight.

Get some flat rate regional a, b, c boxes Even though the regional c box costs more then it should . It would be just one box my zip is 07731 your zip is 75035

I would have paid you the 37 over the 33 to have it in one box. I just did this with canary when I got a tube from him I asked for 1 c and I paid 37 to have the one box.

you most likely used a pair of mediums that was around 30 bucks. Please contact your post office about the missing box. I will contact my post office. I find it helps missing shit get found.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: CanaryInTheMine on September 10, 2014, 04:31:58 PM

Just keep in mind that Rovkminer Pis should have little heatsinks on their chips. Maybe case design should take this into account, incase spacing is effected.

Can you post a pic? I don't think I got the beefed up RPis in this shipment. Fortunately, I haven't had any issues with reboots with the current gen Pis.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Just keep in mind that Rovkminer Pis should have little heatsinks on their chips. Maybe case design should take this into account, incase spacing is effected.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: CrazyGuy on September 10, 2014, 03:55:35 PM

Quote from: mstrongbow on September 10, 2014, 03:06:30 PM

Quote from: CanaryInTheMine on September 10, 2014, 02:53:13 PM

Quote from: mstrongbow on September 10, 2014, 02:46:11 PM

Quote from: ManeBjorn on September 09, 2014, 06:53:38 PM

Great work as always.
The look nice!

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

Dude! That is an excellent idea! Are all the Rockminer USB hubs the same ? I have one here with my RK-Box...I can get started on the design and get a couple your way pretty soon. Cool

You could hit the trifecta with the pi, usb hub, and Rockminer's PSU breakout board in one case. The usb hub is the same as the one that comes with the RK-Box, and the breakout board is similar to Blackarrow's. I'll get one out to you if you want to give it a shot.

Heck yeah bro, that would be awesome!
I saw their new breakout board and immediately had a couple ideas but none near as good as what you guys have suggested.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: mstrongbow on September 10, 2014, 03:06:30 PM

Quote from: CanaryInTheMine on September 10, 2014, 02:53:13 PM

Quote from: mstrongbow on September 10, 2014, 02:46:11 PM

Quote from: ManeBjorn on September 09, 2014, 06:53:38 PM

Great work as always.
The look nice!

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

Dude! That is an excellent idea! Are all the Rockminer USB hubs the same ? I have one here with my RK-Box...I can get started on the design and get a couple your way pretty soon. Cool

You could hit the trifecta with the pi, usb hub, and Rockminer's PSU breakout board in one case. The usb hub is the same as the one that comes with the RK-Box, and the breakout board is similar to Blackarrow's. I'll get one out to you if you want to give it a shot.

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: CanaryInTheMine on September 10, 2014, 02:53:13 PM

Quote from: mstrongbow on September 10, 2014, 02:46:11 PM

Quote from: ManeBjorn on September 09, 2014, 06:53:38 PM

Great work as always.
The look nice!

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

Dude! That is an excellent idea! Are all the Rockminer USB hubs the same ? I have one here with my RK-Box...I can get started on the design and get a couple your way pretty soon. Cool

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: mstrongbow on September 10, 2014, 02:46:11 PM

Quote from: ManeBjorn on September 09, 2014, 06:53:38 PM

Great work as always.
The look nice!

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

Maybe you can create a case that holds the Pi and the USB hub (that's shipped with rockminer) as 1 unit...

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Quote from: ManeBjorn on September 09, 2014, 06:53:38 PM

Great work as always.
The look nice!

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Thanks bro! I really enjoy designing and printing this type of stuff.

Packing these up now!

ManeBjorn

legendary

Activity: 1288

Merit: 1004

Great work as always.
The look nice!

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Thanks man, the basic model was fairly straight forward but getting it just right was a sweet challenge. I am still chasing a bug in the model but they still print well. Sometimes 3d modeling can really drive me crazy, heh.
I will be snapping some last minute pics of the lot this evening when packing them for tomorrows shipment.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: mstrongbow on September 09, 2014, 03:46:43 PM

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

Looks awesome, great work!

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Thanks for posting the pic bro, looks good! Runs fairly cool I'd imagine yeah?

mstrongbow

sr. member

Activity: 322

Merit: 250

3D Printed!

Here we go! First 10 units shipping tomorrow!

These will be a www.Asicpuppy.com EXCLUSIVE item for at least the first 50! I won't sell these direct.

Enjoy...

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I will run the 2 on a gold evga 1300 and on a pair of plats seasonic , antec

CrazyGuy

legendary

Activity: 1973

Merit: 1007

I've copied the code from Rockminer's RPi image and built for Windows. With a bronze rated PSU and only 1 unit, I am using 133 watts at 320 clock(120gh/s) and 143 watts at 350(129gh/s). I'm sure a more efficient PSU and multiple units would significantly lower avg power usage and I'm going to let Mr. Philip confirm. Also, I haven't tried lowering the clock freq yet.

320

350

ManeBjorn

legendary

Activity: 1288

Merit: 1004

That is great news!
Thanks again for the work on the software to run them. Cheesy

Quote from: CrazyGuy on September 08, 2014, 10:29:31 PM

I've tested at 320 and 350 freq in a very hot room and both frequencies are giving me around 110-124gh/s average over the past 10 minutes. 55 decibels measured from 3 feet away. I've been unable to find an official windows build of Rockminer's custom cgminer, but the code is present in the rpi image. I may pull it down and do my own windows build tonight if I have time.

Topic: ASICPuppy.net - Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH - page 19. (Read 105431 times)