Pages:
Author

Topic: ASICPuppy.net - Terminus, Moonlander 2, 2pacs in Stock! BTC,LTC,ETH,BCH - page 15. (Read 105431 times)

legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
USB-UART adapters are in! The adapter and two variants of an imaged RPI are now selectable add-ons during purchase.

I went to the site and did not see an sd card.

  I have the rpi you sold to me a month ago so I only need an sd card. and an usb adapter. If I order one . let me know if I can buy just the sd card with software.

Sent you a PM. I didn't order a bunch of extra SD cards to resell but I'll get a small batch for those looking for just the image.

going to buy the unit via asicpuppy.  will pay 599 + 6 for usb  adapter. + ? fpr shipping.

going to the site now.



I sent a payment for 1 prisma and 1 usb adapter.  did it on asicpuppy.com via paypal

sent a pm to you about sd card please let me know about it.

ORDER #100000251
legendary
Activity: 1288
Merit: 1004
Are you going to have a DL for your image?

USB-UART adapters are in! The adapter and two variants of an imaged RPI are now selectable add-ons during purchase.

I went to the site and did not see an sd card.

  I have the rpi you sold to me a month ago so I only need an sd card. and an usb adapter. If I order one . let me know if I can buy just the sd card with software.

Sent you a PM. I didn't order a bunch of extra SD cards to resell but I'll get a small batch for those looking for just the image.
legendary
Activity: 1973
Merit: 1007
USB-UART adapters are in! The adapter and two variants of an imaged RPI are now selectable add-ons during purchase.

I went to the site and did not see an sd card.

  I have the rpi you sold to me a month ago so I only need an sd card. and an usb adapter. If I order one . let me know if I can buy just the sd card with software.

Sent you a PM. I didn't order a bunch of extra SD cards to resell but I'll get a small batch for those looking for just the image.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
USB-UART adapters are in! The adapter and two variants of an imaged RPI are now selectable add-ons during purchase.

I went to the site and did not see an sd card.

  I have the rpi you sold to me a month ago so I only need an sd card. and an usb adapter. If I order one . let me know if I can buy just the sd card with software.
legendary
Activity: 1973
Merit: 1007
USB-UART adapters are in! The adapter and two variants of an imaged RPI are now selectable add-ons during purchase.
newbie
Activity: 12
Merit: 0
Got it up and running as of last night, so at least 8 hours and it's running flawlessly at a decent rate, averaging around 100GH/s.
Next step is to see if I can swap out the fans for something a bit quieter as I have my computer set up in my bedroom.
I'm thinking of getting another unit now as soon as I can sort out a PSU for it.   Grin
newbie
Activity: 12
Merit: 0
It's being detected now, not sure why, but the command window goes blank after a period of waiting for work to be allocated .... and there are no menu options shown on the top of that box as there was previously.  Huh
newbie
Activity: 12
Merit: 0

Haha, sorry. Check out step 3-6 on the the original box setup. I'll update instructions for the new one to re-iterate.
3) Run zadig_xp_2.1.0.exe from the dektop or start menu
4) Select your device in the top drop down (CP2102 USB to UART Bridge Controller) and select WinUSB in the bottom drop down
5) Click "Install Driver"
6) Close Zadig
Thanks, I'd used those instructions already and that was how I got the software installed to run, but in the CGMiner interface it isn't registering a USB device, although my computer detects it correctly.
Maybe that has something to do with it not hashing?
Also, during setup I didn't change any pool settings etc and left it so I could get it up and running for testing, figuring I can change that later, is the password and user number in that randomly generated or does it belong to someone?
Told you i'm not cluey when it comes to software.
If I can finally get it hashing, how do I set it up to solo mine, there isn't an option for that in the software to select that I can see?Huh
legendary
Activity: 1973
Merit: 1007
Prismas in stock and ready to ship. Please note that I did not receive any usb-uart adapters, and my BE controllers are reserved for group buy participants, so you will need to have these accessories beforehand. Prisma price is subject to change along with BTC exchange rate.

Oh well I waited for nothing.  Not blaming you but friedcat is not doing miners right .

Sorry bud, I know it's a let down. I'm doing everything I can to get ASICMiner to express the adapters to me. Hopefully I'll have them in within a couple days.

hope it happens.

Got ahold of AM and they are shipping the adapters express today. I should hopefully have them by the end of the week.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Prismas in stock and ready to ship. Please note that I did not receive any usb-uart adapters, and my BE controllers are reserved for group buy participants, so you will need to have these accessories beforehand. Prisma price is subject to change along with BTC exchange rate.

Oh well I waited for nothing.  Not blaming you but friedcat is not doing miners right .

Sorry bud, I know it's a let down. I'm doing everything I can to get ASICMiner to express the adapters to me. Hopefully I'll have them in within a couple days.

hope it happens.
legendary
Activity: 1973
Merit: 1007
Prismas in stock and ready to ship. Please note that I did not receive any usb-uart adapters, and my BE controllers are reserved for group buy participants, so you will need to have these accessories beforehand. Prisma price is subject to change along with BTC exchange rate.

Oh well I waited for nothing.  Not blaming you but friedcat is not doing miners right .

Sorry bud, I know it's a let down. I'm doing everything I can to get ASICMiner to express the adapters to me. Hopefully I'll have them in within a couple days.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Prismas in stock and ready to ship. Please note that I did not receive any usb-uart adapters, and my BE controllers are reserved for group buy participants, so you will need to have these accessories beforehand. Prisma price is subject to change along with BTC exchange rate.

Oh well I waited for nothing.  Not blaming you but friedcat is not doing miners right .
legendary
Activity: 1973
Merit: 1007
Prismas in stock and ready to ship. Please note that I did not receive any usb-uart adapters, and my BE controllers are reserved for group buy participants, so you will need to have these accessories beforehand. Prisma price is subject to change along with BTC exchange rate.
legendary
Activity: 1973
Merit: 1007
Make sure you are attaching the win usb drivers to that device. Which binary are you pointing to with guiminer? It should be no different than running straight from the command line.
Now if you can explain that in English I might have a chance of getting it running.
I'm competent with hardware, not software, so that is all Greek to me.
GUIMiner is basically set and forget, it installed, detects the hardware (GPU and CPU) and runs.
I expected CGMiner to be the same with the Rbox R2, but there are basically no instructions apart from plugging it in and downloading software.
I need step by step instructions for a NOOB to set this up, installing the software, changing settings, joining a pool or solo mining preferably.  Grin
Without basic instruction this unit is just an expensive paperweight.

Haha, sorry. Check out step 3-6 on the the original box setup. I'll update instructions for the new one to re-iterate.
3) Run zadig_xp_2.1.0.exe from the dektop or start menu
4) Select your device in the top drop down (CP2102 USB to UART Bridge Controller) and select WinUSB in the bottom drop down
5) Click "Install Driver"
6) Close Zadig
newbie
Activity: 12
Merit: 0
Make sure you are attaching the win usb drivers to that device. Which binary are you pointing to with guiminer? It should be no different than running straight from the command line.
Now if you can explain that in English I might have a chance of getting it running.
I'm competent with hardware, not software, so that is all Greek to me.
GUIMiner is basically set and forget, it installed, detects the hardware (GPU and CPU) and runs.
I expected CGMiner to be the same with the Rbox R2, but there are basically no instructions apart from plugging it in and downloading software.
I need step by step instructions for a NOOB to set this up, installing the software, changing settings, joining a pool or solo mining preferably.  Grin
Without basic instruction this unit is just an expensive paperweight.
legendary
Activity: 1973
Merit: 1007
Make sure you are attaching the win usb drivers to that device. Which binary are you pointing to with guiminer? It should be no different than running straight from the command line.
newbie
Activity: 12
Merit: 0
Rockminer RBox Rev 2

Update 9/12/2014: Windows installation package now includes new cgminer build for Windows that supports the second gen R-Box and frequencies up to 350

Download Windows Installation Package
Package is available in English, French, Spanish, Chinese(HK) and Chinese(Traditional)


Rockminer Rbox Rev 1
Package Instructions for Running on Windows:
1) Download CGMiner installation msi for your corresponding language:
     - Download Windows Installation Package
2) Run installation Package
3) Run zadig_xp_2.1.0.exe from the dektop or start menu
4) Select your device in the top drop down (CP2102 USB to UART Bridge Controller) and select WinUSB in the bottom drop down
5) Click "Install Driver"
6) Close Zadig
7) Run "Start Cgminer" from desktop or start menu

I've just spent the whole day trying to get my Revision 2 Rbox to work using the above instructions.
Using default settings for the pool and user (unchanged from settings as downloaded, just for testing),  CGMiner installed and starts but shows no activity on the top command line, ie no hashes although it finds the pool and detects blocks.
I also notice the status light on the unit does not light up  Huh
I'd like to get this up and running in a Windows environment and set it up for solo mining.
Any ideas, tips etc?
I'm currently mining albeit slowly through GUIMiner using the GPU in my system directed to my wallet.
I'd like to be able to do similar with CGMiner and direct that to the same wallet.  Cool
legendary
Activity: 966
Merit: 1003
Just put in for two!
legendary
Activity: 1973
Merit: 1007
Does, that still get a tracking number? It said standard shipping when I entered it.

Yes
legendary
Activity: 966
Merit: 1003
Does, that still get a tracking number? It said standard shipping when I entered it.
Pages:
Jump to: