Worst mobo ever...
Agreed! I hate it and I've had to use many tricks to get it to work and see all 13 cards and mine with stability. Crap Crap Crap!
Topic: ASrock H110 Pro BTC+ 13 GPU Board (Read 54645 times)
Agreed! I hate it and I've had to use many tricks to get it to work and see all 13 cards and mine with stability. Crap Crap Crap!
Also on my rx580's setups i never plugged the sata pow and got up to 10x cards detected and working..
Make sure when you re plugging your risers to do so in and order per one.
For example first plug the black slot. Boot windows and check everything..
Then start with the white slots one at a time..boot windows check..
If that works proceed like that until all your cards are detected.
Also. For the 13x setup you need 5x nvidia mining only cards and i think will only work with linux based OS.
Make sure when you re plugging your risers to do so in and order per one.
For example first plug the black slot. Boot windows and check everything..
Then start with the white slots one at a time..boot windows check..
If that works proceed like that until all your cards are detected.
Also. For the 13x setup you need 5x nvidia mining only cards and i think will only work with linux based OS.
I also had an issue with random GPU recognition. Setup was a mixture of different AMD cards 570/580.
When I install all 12 same Sapphire Nitro 570 (CSM disable), works perfect. Every restart pass normal.
When I install all 12 same Sapphire Nitro 570 (CSM disable), works perfect. Every restart pass normal.
I just fix it. I need to set in BIOS to use only one core from CPU, and works fine .. strange !
CPU : G3930
CPU : G3930
Have you tried increasing the boot delay? I set it to maximum for any motherboard with more than 6 gpu. Seems to let give the bus time to spin everything up.
Worst mobo ever...
Hello. I just replace my old Biostar TB250-BTC Pro with Asrock H110 Pro BTC+ and I have a problem.
System won`t boot ... after display Asrock logo, I see only one " - " in upper left corner
OS tested : Ethos and HiveOS
Boot : from USB ( i also try to boot from SSD )
VGA : Onbord ( and with 1 or 12 gpus, same problem )
The MB is connected with 2 molex + 1 sata from the same PSU
I made test with same USB in other rig and works fine, also all GPU`s/risers works without problems ... so problem is from MB. One hour tested diffrent BIOS settings without success ...
Thanks and I`m waiting some advices
System won`t boot ... after display Asrock logo, I see only one " - " in upper left corner
OS tested : Ethos and HiveOS
Boot : from USB ( i also try to boot from SSD )
VGA : Onbord ( and with 1 or 12 gpus, same problem )
The MB is connected with 2 molex + 1 sata from the same PSU
I made test with same USB in other rig and works fine, also all GPU`s/risers works without problems ... so problem is from MB. One hour tested diffrent BIOS settings without success ...
Thanks and I`m waiting some advices
Yes this is a very poor motherboard.
Hi
I bought this ASrock H110 Pro BTC + motherboard, my intention is to install 12 gpus (580 + 570) and leave the integrated graphic only for the monitor and avoid stress in mining gpu.
I have seen that many miners are using 13 gpus mining, is it possible to use the integrated graph for the monitor + 13 gpus mining? (14 gpus)
I suppose those who use 13 gpus mining do not use the integrated one, does the equipment remain stable?
Greetings guys!
I bought this ASrock H110 Pro BTC + motherboard, my intention is to install 12 gpus (580 + 570) and leave the integrated graphic only for the monitor and avoid stress in mining gpu.
I have seen that many miners are using 13 gpus mining, is it possible to use the integrated graph for the monitor + 13 gpus mining? (14 gpus)
I suppose those who use 13 gpus mining do not use the integrated one, does the equipment remain stable?
Greetings guys!
Is it possible to use the integrated graphics for the monitor + 13 GPUs mining? (14 GPUs)?
Yes.
I am having the exact same problem (doesn't see all GPUs, several reboots and it MIGHT see them all). Have you found a fix or solution?
Have you updated to the latest bios?
The latest is 1.10, correct? If so, yes, I have the latest BIOS.
I doubt there is a problem with the 110. My next step would be to replace risers on cards that don’t show up. There’s an old saying in the mining world... If you’re sure it’s not the riser, then it’s probably the riser.
The symptom is that each time the system boots, somewhere between 1 and 4 RANDOM GPUs (could be 1, could be 3, etc.) out of the 8 total GPUs, are not seen by the OS (smOS in this case). However, if you keep rebooting, eventually it will fire up all 8. Since it's a random number of random GPUs, I wouldn't suspect it would be a riser unless a bad riser is somehow interfering with the proper operation of other risers. It seems more likely to be BIOS settings and/or power-related.
Well, if you think it may be a power issue, disconnect power from 1 or 2 cards and see if the rest come up consistently.
I am having the exact same problem (doesn't see all GPUs, several reboots and it MIGHT see them all). Have you found a fix or solution?
Have you updated to the latest bios?
The latest is 1.10, correct? If so, yes, I have the latest BIOS.
I doubt there is a problem with the 110. My next step would be to replace risers on cards that don’t show up. There’s an old saying in the mining world... If you’re sure it’s not the riser, then it’s probably the riser.
The symptom is that each time the system boots, somewhere between 1 and 4 RANDOM GPUs (could be 1, could be 3, etc.) out of the 8 total GPUs, are not seen by the OS (smOS in this case). However, if you keep rebooting, eventually it will fire up all 8. Since it's a random number of random GPUs, I wouldn't suspect it would be a riser unless a bad riser is somehow interfering with the proper operation of other risers. It seems more likely to be BIOS settings and/or power-related.
I am having the exact same problem (doesn't see all GPUs, several reboots and it MIGHT see them all). Have you found a fix or solution?
Have you updated to the latest bios?
The latest is 1.10, correct? If so, yes, I have the latest BIOS.
I doubt there is a problem with the 110. My next step would be to replace risers on cards that don’t show up. There’s an old saying in the mining world... If you’re sure it’s not the riser, then it’s probably the riser.
I am having the exact same problem (doesn't see all GPUs, several reboots and it MIGHT see them all). Have you found a fix or solution?
Have you updated to the latest bios?
The latest is 1.10, correct? If so, yes, I have the latest BIOS.
I am having the exact same problem (doesn't see all GPUs, several reboots and it MIGHT see them all). Have you found a fix or solution?
Have you updated to the latest bios?
I can't be very good at it 
I am having the exact same problem (doesn't see all GPUs, several reboots and it MIGHT see them all). Have you found a fix or solution?
This is terrible board! I have seen so many problems with this board while making diagnostics to other people rigs. Then I had 2 for my own rigs. Nvidia went well but amd rig had this wierd PCIE not detected problem. After swaping half risers and wasting time repluging, cmos clearing, setting changes, various bioses I realised that this is just stupid board! Now my rig works but after every restart some cards are not detected, so I do restarts while rig works normally again!
I have never encountered such problems with biostar 12 slot board!
I have never encountered such problems with biostar 12 slot board!
Biostar looks better than this one however this is a nice board. I also manage other people rigs and I have seen really great stability with this board. The risers I use are always 009s which have at least 3 ways of connecting the riser and they are one of the best quality and this is one of the boards I have had the less problems with. It all depends on the configuration, I would put this board and the biostar in the same league.
This is terrible board! I have seen so many problems with this board while making diagnostics to other people rigs. Then I had 2 for my own rigs. Nvidia went well but amd rig had this wierd PCIE not detected problem. After swaping half risers and wasting time repluging, cmos clearing, setting changes, various bioses I realised that this is just stupid board! Now my rig works but after every restart some cards are not detected, so I do restarts while rig works normally again!
I have never encountered such problems with biostar 12 slot board!
I have never encountered such problems with biostar 12 slot board!
I’m using this mobo more than one year without any problems. I achieved to run only 12 AMD GPUs and as I understood it is related to Windows 10 restrictions. There is a perfect possibility to run 13 GPUs, but you have to use mix of AMD and NVidia GPUs. Good board with good quality.
Jump to: