This is deja vu - isn't it?
And these processes somehow survive after reboot!
http://i57.tinypic.com/2iu2tdg.jpg
Topic: Avalon ASIC users thread - page 27. (Read 438575 times)
I am using an Avalon 2nd Gen and in the admin panel, when I try to save cgminer settings it remains in loading mode... What is wrong?
Network - Diagnostics - check network
Status - Processes - check "cgminer" process
it should be long - cgminer --avalon-options 115200:24:10:41:300 -q -#poolname# ...
Also I have traced the cgminer boot process:
it starts with {S99cgminer} /bin/sh /etc/rc.common /etc/rc.d/S99cgminer boot
then {cgminer} /bin/sh /etc/rc.common /etc/init.d/cgminer start
and {cgminer-monitor} /bin/sh /usr/bin/cgminer-monitor
I am using an Avalon 2nd Gen and in the admin panel, when I try to save cgminer settings it remains in loading mode... What is wrong?
http://i.imgbox.com/QZwl4s8O.png
Cgminer API Log
SSH Error
http://i.imgbox.com/QZwl4s8O.png
Cgminer API Log
Code:
[Firmware Version] => 20131229
cgminer: 698d677
cgminer-openwrt-packages: 54d7569
luci: 346e3e7
Socket connect failed: Connection refused
SSH Error
Code:
root@OpenWrt:~# /etc/init.d/cgminer start
ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping
Excellent.
I will do that soon then.
Thanks.
I will do that soon then.
Thanks.
I have set up a flea market to buy / sell the Gen 1, 3 module avalons.
To sell a unit, post to the thread.
To make a bid, send the payment to the bid/escrow address 1JE7PkQSHEy66n3dHAqxJC62aBKzUmWMhz
https://bitcointalk.org/index.php?topic=392054.new#new
I am the auctioneer. All non-winning funds will be returned. Winning funds will be paid on proof of delivery. I will charge 1% escrow.
Details in the thread.
To sell a unit, post to the thread.
To make a bid, send the payment to the bid/escrow address 1JE7PkQSHEy66n3dHAqxJC62aBKzUmWMhz
https://bitcointalk.org/index.php?topic=392054.new#new
I am the auctioneer. All non-winning funds will be returned. Winning funds will be paid on proof of delivery. I will charge 1% escrow.
Details in the thread.
I have set up a flea market to buy / sell the Gen 1, 3 module avalons.
To sell a unit, post to the thread.
To make a bid, send the payment to the bid/escrow address 1JE7PkQSHEy66n3dHAqxJC62aBKzUmWMhz
https://bitcointalk.org/index.php?topic=392054.new#new
I am the auctioneer. All non-winning funds will be returned. Winning funds will be paid on proof of delivery. I will charge 1% escrow.
Details in the thread.
To sell a unit, post to the thread.
To make a bid, send the payment to the bid/escrow address 1JE7PkQSHEy66n3dHAqxJC62aBKzUmWMhz
https://bitcointalk.org/index.php?topic=392054.new#new
I am the auctioneer. All non-winning funds will be returned. Winning funds will be paid on proof of delivery. I will charge 1% escrow.
Details in the thread.
I was wondering if anyone knows where to get a Avalon ASIC Module Gen1?
Everywhere I look is sold out.
Everywhere I look is sold out.
Another question. Can I replace the TPLink module with a Raspberry Pi?
I am using an Avalon 2nd Gen and in the admin panel, when I try to save cgminer settings it remains in loading mode...
http://i.imgbox.com/QZwl4s8O.png
http://i.imgbox.com/QZwl4s8O.png
OK.
1. The network:
Using router ZTE 660 or mobile phone WiFi (less firewall - better works)
Lan 5 cat - static address.
I tried it many times - used only Lan, then only WiFi.
It works only, if I reflash or load defaults - only this time, after pushing "apply settings" - the process "cgminer" is vanished and "connection refused"
2. Startup tab:
cgminer process: I push stop, wait 10 sec, push start - go to process tab, see nothing
There are all the screens:
https://drive.google.com/folderview?id=0B0-eMVr6x9_0UXk0Z0h1VlZwM28&usp=sharing
1. The network:
Using router ZTE 660 or mobile phone WiFi (less firewall - better works)
Lan 5 cat - static address.
I tried it many times - used only Lan, then only WiFi.
It works only, if I reflash or load defaults - only this time, after pushing "apply settings" - the process "cgminer" is vanished and "connection refused"
2. Startup tab:
cgminer process: I push stop, wait 10 sec, push start - go to process tab, see nothing
There are all the screens:
https://drive.google.com/folderview?id=0B0-eMVr6x9_0UXk0Z0h1VlZwM28&usp=sharing
Help me.
I have some Avalon 230Ghs - I dont know the number of batch
What Tp-link do I have?
How can I find proper firmware.
Please, the "connection refused" - is constant problem.
I use that instruction:
But I connects only to with default pool settings (donating) stratum+tcp://stratum.ozco.in:80
But it doesnt mine.
I have some Avalon 230Ghs - I dont know the number of batch
What Tp-link do I have?
How can I find proper firmware.
Please, the "connection refused" - is constant problem.
I use that instruction:
Quote
Setup your laptop IP address 192.168.0.101
Open http://192.168.0.100
Make sure WR703N can access Internet, Configure WiFi: Network -> WIFI -> Scan(select your WIFI network) -> Join Network -> WPA passphrase -> Submit -> Save & Apply for connect to WIFI Internet
setup your mining worker: Status -> Cgminer Configuration.
Stop then Start the cgminer service (Restart not working. it's a known bug): System -> Startup,
Check your avalon status: Status -> Cgminer Status
Open http://192.168.0.100
Make sure WR703N can access Internet, Configure WiFi: Network -> WIFI -> Scan(select your WIFI network) -> Join Network -> WPA passphrase -> Submit -> Save & Apply for connect to WIFI Internet
setup your mining worker: Status -> Cgminer Configuration.
Stop then Start the cgminer service (Restart not working. it's a known bug): System -> Startup,
Check your avalon status: Status -> Cgminer Status
But I connects only to with default pool settings (donating) stratum+tcp://stratum.ozco.in:80
But it doesnt mine.
Please see the questions that I posted earlier today and yesterday.
In addition, what does the TP-Link connect to?
plz more pictures and cgminer config...
Help me.
I have some Avalon 230Ghs - I dont know the number of batch
What Tp-link do I have?
How can I find proper firmware.
Please, the "connection refused" - is constant problem.
I use that instruction:
But I connects only to with default pool settings (donating) stratum+tcp://stratum.ozco.in:80
But it doesnt mine.
http://i41.tinypic.com/54ht08.jpg
http://i39.tinypic.com/6jopaw.jpg
I have some Avalon 230Ghs - I dont know the number of batch
What Tp-link do I have?
How can I find proper firmware.
Please, the "connection refused" - is constant problem.
I use that instruction:
Quote
Setup your laptop IP address 192.168.0.101
Open http://192.168.0.100
Make sure WR703N can access Internet, Configure WiFi: Network -> WIFI -> Scan(select your WIFI network) -> Join Network -> WPA passphrase -> Submit -> Save & Apply for connect to WIFI Internet
setup your mining worker: Status -> Cgminer Configuration.
Stop then Start the cgminer service (Restart not working. it's a known bug): System -> Startup,
Check your avalon status: Status -> Cgminer Status
Open http://192.168.0.100
Make sure WR703N can access Internet, Configure WiFi: Network -> WIFI -> Scan(select your WIFI network) -> Join Network -> WPA passphrase -> Submit -> Save & Apply for connect to WIFI Internet
setup your mining worker: Status -> Cgminer Configuration.
Stop then Start the cgminer service (Restart not working. it's a known bug): System -> Startup,
Check your avalon status: Status -> Cgminer Status
But I connects only to with default pool settings (donating) stratum+tcp://stratum.ozco.in:80
But it doesnt mine.
http://i41.tinypic.com/54ht08.jpg
http://i39.tinypic.com/6jopaw.jpg
The USB Hub... in older batches, there was a usb connection problem between the controller and the tplink device...
i dont know...
But now... everything nice...
Many many thx to you and the whole community... this is great...
i dont know...
But now... everything nice...
Many many thx to you and the whole community... this is great...
WORKING!!!
YOU ARE GENIOUS!!!
THX so much... now i understand the problem... :-)
YOU ARE GENIOUS!!!
THX so much... now i understand the problem... :-)
Thanks.
Um, what did the problem turn out to be?
WORKING!!!
YOU ARE GENIOUS!!!
THX so much... now i understand the problem... :-)
YOU ARE GENIOUS!!!
THX so much... now i understand the problem... :-)
Here is the CgminerAPI Log...
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
It is connected over my home network (complete house is Cat6 cabled)
IP is static. Pic is also in the link above...
I have the controller connected to the tplink with a hub because without i cannot communicate with the webinterface... the hub is non powered... picture also above
thx
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
It is connected over my home network (complete house is Cat6 cabled)
IP is static. Pic is also in the link above...
I have the controller connected to the tplink with a hub because without i cannot communicate with the webinterface... the hub is non powered... picture also above
thx
To me, it looks like the TP-Link 703 n is connected to the internet, but I can't see any evidence that the controller board is connected to the TP-Link.
What does the cgminer api log say?
What does the cgminer api log say?
OK. I connected excatly like you told me, but its the same...
i only have 2 miner modules.
Is this correct?
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
and what about the stratumUrl in Status page? There is false... What about this?
Could it also be a firewall problem? The device has an integrated firewall i think... The firewall of my router is OK. i tested it...
thx for your help...
i only have 2 miner modules.
Is this correct?
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
and what about the stratumUrl in Status page? There is false... What about this?
Could it also be a firewall problem? The device has an integrated firewall i think... The firewall of my router is OK. i tested it...
thx for your help...
Now... I can connect to the webconfig of the miner...
The problem was the missing USB Hub between the TPLINK 703N and the FPGA... OMG ;-)
but
see the screenshot below: It does no hashing...
It has internet connection an the cgminer api log looks ok (doesnt it?)
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
(The CgMinerConfig files)
Please help me... This is f....ing hard... I need to start the device... What did i wrong???
thx
The problem was the missing USB Hub between the TPLINK 703N and the FPGA... OMG ;-)
but
see the screenshot below: It does no hashing...
It has internet connection an the cgminer api log looks ok (doesnt it?)
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
(The CgMinerConfig files)
Please help me... This is f....ing hard... I need to start the device... What did i wrong???
thx
Looks Like your powered up wrong. You need to power the EPS_12_V_1 and EPS_12_V_2 then PCIE_12V_1 PCIE_12V_2
EPS_12_V_1 needs the 8 pin off the power
EPS_12_V_2 needs the 4+4 pin
PCIE_12V_1 PCIE_12V_2 needs the 6+2 pin connectors
along with the 24 pin of course.
Then try it.
Now... I can connect to the webconfig of the miner...
The problem was the missing USB Hub between the TPLINK 703N and the FPGA... OMG ;-)
but
see the screenshot below: It does no hashing...
It has internet connection an the cgminer api log looks ok (doesnt it?)
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
(The CgMinerConfig files)
Please help me... This is f....ing hard... I need to start the device... What did i wrong???
thx
The problem was the missing USB Hub between the TPLINK 703N and the FPGA... OMG ;-)
but
see the screenshot below: It does no hashing...
It has internet connection an the cgminer api log looks ok (doesnt it?)
https://drive.google.com/folderview?id=0B-oHg9L2m0H5cGx6dGxsUDIzbXc&usp=sharing
(The CgMinerConfig files)
Please help me... This is f....ing hard... I need to start the device... What did i wrong???
thx
Jump to: