Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 285. (Read 703547 times)

Thanks for the suggestion. From what I can see this software doesn't provide any monitoring API. The command line is however more or less compatible with ccminer.

If you run into this issue, please send me your log file and configuration file and I will be able to investigate in more detail. Thanks!

who does hex XDNA show zero on profit details pages ?  I have it benchmarked but still see zero

Thankyou.. I try --gpu-platform 1 , now work all 5 gpu, but hashrate is very low, jump from 500kHz to 700kHz

Here is my settings..... Can you help me ?
sgminer.exe -k lyra2z -o stratum+tcp://eu.bsod.pw:2159 -u GgXc......................vd -p c=GIN -I 21 --gpu-platform 1

not AMD user myself, but check sgminer --help, my guess is something to do with --gpu-platform, or mapping.

i try lot of sgminer version, but all sgminer work only with one gpu ( i have 5 gpu )

Find a sgminer fork with supported kernels, ones included with AM doesn't seem to support Lyra2z.

or run TDXMiner on Linux

Nobody can help me, how mine GINCOIN with AMD card ?

I'm still getting massive delays in the UI. I noticed that it's fine for the first minute or two after I open the program, and then gets progressively worse, usually to the point where i need to force terminate AM and start from scratch. There's definitely something weird going on, Ive tried performance mode, Ive tried turning off my rules, beyond that I'm not sure what can be causing these UI freezes.

I noticed when I have a string in the command line that when I switch between managed miner and managed profit miner once or twice that the command line item disappears.  Intended?

Found the setting included in the pool configuration...

Can this be added to the Pool Group configuration possibly?

[Maybe this is in the software already, but I did not see it.

I am looking for a scaling factor for the monthly revenue/profits.
In my case, there are 4 hours M-F that I do not mine.  So I would like the profit/revenue calculation for the month to allow for a scaling factor from 0 through 1 so that I can adjust for the missing hours per month (or for any other reason, does not really matter why actually).

So if I assume a month is 28 days, this equals 24*7*4=672 hours.  If I know I will lose 20 hours a week mining, that would be 80 hours not mined out of the 672.  I would then want to put in (672-80)/672 as my scaling factor for the calculation for the monthly revenue/profit figure.

Where I live, my power rates are one low rate for weekends, and 3 different rates for M-F.  So what I do is to calculate the average rate for the times I mine and put that into the cost of a KW/h.  Another option would maybe have a field that asks how many hours are mined each day which may result in a more accurate figure since the number of days in a month varies which would calculate the total hours per month and I would still have to use my own calculated power average.  Just a thought.


Thanks for an Awesome piece of software, top notch!]

@patrike

An improvement.

Replace the 'window hashrate save' by hasrate and save power and extend also to save the power. So we can update the profiles more completely (new hashrate and new power)

https://i.imgur.com/EfOIbzN.jpg

it's happening to me after some research my config file was corrupt when update new version... so i start all from begining and erase all awesome folder before make new install

who said for lyra2z? Read please ! Lyra2v2 (Lyra2rev2)

mkxminer is not for Lyra2z (GinCoin) 

Please add mkxminer lyra2v2 for amd
Link >> https://bitcointalksearch.org/topic/mkxminer-fast-lyra2zlyra2rev2-miner-for-amd-gpu-zcoin-gincoin-vert-mona-2360168

Thanks

Hi all, and thanks @patrike for the awesome program.

One question.

When performing a benchmark, miners appear and test in algorithms that are disabled. Before, this did not happen, I think. I leave you some captures. Why it can be? Is it a problem with my configuration? For example, the ccminer-krnlx-xevan is configured as compatibility mode full on ccminer. The algo Allium is enabled due to the compatibility with ccminer but in the configuration of the krlnx is disable. By performing the benchmark, it appears and attempts to perform it giving a logical error. And so with almost all the software. Which makes Bencmark very tedious. Am I performing a bad configuration?

https://i.imgur.com/Z8omzO9.jpg

https://imgur.com/a/LAoKwPX

Hello !

I want mine GINCOIN (lyra2z) with AMD rx570/580 card.
I try tried many settings but does not work.
SGminer not start, i have error "failed to start miner process (Sgminer, Lyra2z) 1. Security or antivirus remove..... 2. Use diagnostic...."
In diagnistic i  see :
> [15:30:17] Global quota greatest common denominator set to 1
> [15:30:17] Setting pool 0 name to GINCoin
> [15:30:17] Setting pool 0 profile to AMD X-algorithm
> [15:30:17] Setting pool 0 N-factor to 10
> [15:30:17] Setting pool 0 algorithm to
> [15:30:17] Algorithm  not found, using ckolivas.
> [15:30:17] Setting profile 0 name to AMD X-algorithm
> [15:30:17] Unexpected extra commandline arguments
> [15:30:17] Algorithm  not found, using ckolivas.                   
> [15:30:17] Unexpected extra commandline arguments                   
Failed to start miner process: Process has exited, so the requested information is not available.
Failed to start miner in Diagnostics mode
Diagnostics completed


Can you please help me ?

Can someone tell me what is hashrate LYRA2Z for RX 570 4Gb on Windows ?
If i start sgminer i see only gpu0 ... ( i have 5 GPU)

I've never seen any indication that it would be slower. For ASIC and GPU mining the CPU load is typically low anyway, so consuming a few more CPU cycles on a separate thread should be fine.

I meant to say 5 seconds, but still every 5 seconds it opens a socket connection, sends an API command and disconnects the socket that must have some effect on the performance, have you done any performance benchmark