Topic: mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA... (Read 52770 times)

Dear miners!

I am locking this thread. Please use the new thread for Lyra2Z miner related questions: https://bitcointalksearch.org/topic/development-stopped-currently-mkxminer-5058058

If you are here because of Lyra2rev2 miner, then please think again: Lyra2rev2 ASICs now exist and it is very unprofitable to mine this algorithm with a GPU.
If you just need MONA/VTC/etc coins, then it makes more sense to mine other algorithm (say Lyra2Z, see link above) on a multipool with BTC payouts and then use BTC to buy MONA/VTC.

Thank you
WinMKX

Hello!

I just released a new version of mkxminer. Sorry, it took a little longer than I thought:

v4.1: 27 October 2018
    - Linux build + Windows build
    - About 5% speed increase

* Coming soon *
    - API support

Links in OP

Thanks

PS: I'm planning to create a separate thread for Lyra2z mkxminer, because the discussion above is mostly for Lyra2rev2 algo. But lyra2rev2 is now dead for GPUs (because of ASICs).

https://imgur.com/a/rtsEDEM

Not able to Go more than 7Mh/s In Vega64 how 7.40 Mh/s Advertising , please let us know how to reach up-to 7.40 Mh/s

Same results. After deep inspection, my 7x480 miner consumes little less energy with same OC settings (about 14-16 watt from wall whole system) on MKX instead TeamRED.

winmkx, continue your work on miner and maybe you will take the 4mhs height for 480\580

v4.0 beta: 9 September 2018
    - Added Lyra2z
    - Now 64 bit binaries only, no more 32 bit
    - Now only asm optimized kernels (removed --asm parameter)
    - Removed support for legacy Cards (prior to R9 290)
    - Reduced distribution size
    - Beta release: only windows and only lyra2z (linux and lyra2rev2 with some optimizations will be available in full release)

Hi there! Does -asm 1 work with Fury(X) for anyone using 4.0b to mine lyra2z? When I try it miner simply wont run whining "-a" parameter is wrong. Or asm simply isn't meant to work with Fury?

Tonga should be supported right?
Got a rig of 290x with one 380.
Miner does not initialize on the 380, works fine on several other miners.

[08:54:23 - 0 days 00:00:02] clBuildProgram: -11
[08:54:23 - 0 days 00:00:02] Error: AMD HSA Code Object loading failed.

[08:54:23 - 0 days 00:00:02] Device not supported: "Tonga". Only AMD GCN devices are supported currently. Please double check that you have AMD videocards.
[08:54:23 - 0 days 00:00:02] Connected!
[08:54:24 - 0 days 00:00:03] Failed to init cl state
[08:54:24 - 0 days 00:00:03] --- Detected Platforms ---
[08:54:24 - 0 days 00:00:03] *0 AMD Accelerated Parallel Processing OpenCL 2.0 AMD-APP (2442.12)
[08:54:24 - 0 days 00:00:03] --- Detected GPUs ---
[08:54:24 - 0 days 00:00:03] GPU#0: AMD Radeon(TM) R9 290X
[08:54:24 - 0 days 00:00:03] GPU#1: AMD Radeon(TM) R9 290X
[08:54:24 - 0 days 00:00:03] GPU#2: AMD Radeon R9 200 Series
[08:54:24 - 0 days 00:00:03] GPU#3: AMD Radeon(TM) R9 290X
[08:54:24 - 0 days 00:00:03] GPU#4: AMD Radeon R9 200 Series
[08:54:24 - 0 days 00:00:03] GPU#5: AMD Radeon R9 200 Series
[08:54:24 - 0 days 00:00:03] GPU#6: AMD Radeon (TM) R9 380 Series
[08:54:24 - 0 days 00:00:03]
[08:54:24 - 0 days 00:00:03] Press 'q' to exit application
[08:54:24 - 0 days 00:00:03]
> 0.00MH/s 0.00MH/s 0.00MH/s Off 0.00MH/s 0.00MH/s 0.00MH/s | Temp(C): 71 73 73 71 74 72 61 | Fan: 50% 50% 50% 50% 50% 50

Note regarding mkxminer:

- Please use beta blockchain driver. Link: https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

I use it myself on RX580 and Vega. Running absolutely rock solid.

There are reports, that latest 18.x drivers don't work properly.

- Do not use lyra2rev2 anymore, it is not profitable. Lyra2Z is much better.

- New version will have higher mining speed and Linux support. ETA: This month (October).

- There will be no more Lyra2rev2 support (does not make any sense, because of ASICs).

PS: If you need any comments from me, please send PM. Unfortunately, I don't have time to constantly monitor this forum.

Please compare mining speed of this miner with mkxminer v4 and reply.

My test on MSI RX580:
3.45Mhs on mkxminer 4.0b
3.37Mhs on teamred miner 0.3.2 (minus 3% their devfee) => effective 3.27Mhs
So my miner is 5% faster.

My test on FuryX:
3.61Mhs on mkxminer 4.0b
3.26Mhs on teamred miner 0.3.2 (minus 3% their devfee) => effective 3.16Mhs
So my miner is 14% faster.

Could not test on Vega, because redteam miner could not recognize my Vega64, so cannot publish my results unfortunately.

Best driver is a beta blockchain driver.

Have 7 x VEGA 64 myself, running rock solid.

Hello!

Lyra2rev2 ASICs are out: https://cryptomining-blog.com/10247-the-first-lyra2rev2-asic-miner-is-available-dayun-zig-z1/

And profitability of MONA/VTC is very low.

Please upgrade to mkxminer V4 with Lyra2Z support (links in OP) for a much better profit. Lyra2Z mining is now about 2-3 times more profitable than Lyra2rev2.

Thanks!

now there is finnaly teamred windows miner for lyra2z.  at least those guys do something and are releasing updates frequently.
https://bitcointalksearch.org/topic/ann-teamredminer-optimized-winlinux-amd-gpu-miner-for-lyra2z-and-phi2-5027811

the whole algo is a joke, nobody has any good miner for it.

sad there is no progress...

I think he needs to reduce the dev fee a bit. We need to get 6MH out of the Vega56 to be somewhat useful.

mistakes are not so bad, like, leave reviews, guys

Does this miner have an api?

--powertune - Set the GPU powertune percentage - one value for all or separate by commas for per card

so if I want to set the power at -5% from 100 it would be:
--powertune 95 ?

Would love to test this for you.  Have a few Vega 64s that I'd like to put to work on vert.

Run on my 7970.
Win 64.
Crimson relive 17.4.4.
Core clock 1125.
mkxminer 3.1.0
Lyra2re2 - 24,5 Mh/s.

A good alternative for replacing equihash for a rarity like 7970. How do you think?
Guys, what do you run on your old 7970/280?