[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 445.

OneHarryH

newbie

Activity: 2

Merit: 0

Had to use a restore point in windows 7 now AM has a start error of: error loading Data.bin

Is there a quick fix for this, tried reinstalling.

Thanks

(Claymore's Dual Ethereum Miner)

ordimans

full member

Activity: 162

Merit: 100

Can you explain me why when i define a pool coin on a nicehash scrypt pool (for Litecoin)
Each restart of AM, the coin is lost and it's undef ?

The coin is defined on the pool too.

IT's a bug ? Or not possible to define a pool on nicehash pool ? if yes why ?

thucar

newbie

Activity: 8

Merit: 0

Quote from: patrike on January 14, 2018, 04:55:45 AM

Quote from: pythus24 on January 13, 2018, 12:04:07 AM

Quote from: thucar on January 12, 2018, 11:21:56 PM

I've been using AM for a month now and I'm absolutely loving it. However, after the latest update (v4.3.2) my miners restart very often. Their Uptimes used to be in hours and even days, whereas now it's a rare occasion to see them reach one full hour.

Specifics:
Running Profit Miners with MPH as the only pool selected. Only allowing two algo's(cryptonight and equihash) And it's not that they would switch between the algos when they restart. They just stop mining Equihash and then start at it again.

I'm facing the same problem, but for me the miners restart exactly every 2.5 minutes and it would happen to all running miners at the same time (GPU and CPU). It's like something is forcing the miners to restart.

Profit switching still works though at the interval that I have set. So the restarts every 2.5 minutes is not due to switching to a different algorithm.

Even with profit switching is off and miners setup to mine one coin only, it would behave the same way.

The general answer first:
A later version of Awesome Miner often includes later versions of the mining software as well and these kind of crashes that happens after a while has often very little to do with Awesome Miner. To troubleshoot, is it a specific software like EWBF or Claymore Cryptonight that is crashing? Is it the only software that is instable, or what about the others?

I did see your previous post that you could see this for both CPU and GPU mining. I would recommend to take a look at the rules you have in Awesome Miner. Also, is this on a remote computer via Remote Agent?

I also noticed few lines of the log file in a previous post, but it was a little too short of information what happend just before those lines. Was it a crash that Awesome Miner detected and simply restarted the mining software? Was it a rule that triggered and forced a restart?

I see pythus got his issue resolved, unfortunately for me it seems to be a different cause.
I'm only using Claymore Zcash miner and Claymore Cryptonight miner. I have two dedicated mining rigs managed over the Remote Manager. They both get stopped/started at the same time. Looking at the log file, it seems to be happening just around the time Awesome Miner does profitability calculations.

Code:

18.01.2018 4:08:10.932 [031] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630
18.01.2018 4:08:16.049 [030] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630
18.01.2018 4:08:16.049 [020] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.109:9630
18.01.2018 4:08:21.150 [033] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.109:9630
18.01.2018 4:08:21.150 [037] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630
18.01.2018 4:08:26.236 [011] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.109:9630
18.01.2018 4:08:26.236 [010] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630
18.01.2018 4:08:28.030 [025] [S]Managed Profit Switching. Profile: AMD GPU - Miner1, type: Single
18.01.2018 4:08:28.030 [025] [S] Enabled mining software: ZecClayMiner,CnClayMiner
18.01.2018 4:08:28.030 [025] [S]PoolServiceManager.GetAsPools, pools: 99
18.01.2018 4:08:28.077 [025] [S]PoolServiceManager.GetAllEnabledPools, pools: 42
18.01.2018 4:08:28.077 [025] [S]PoolServiceManager.GetAllEnabledPools, SinglePoolCM predefined count: 116
18.01.2018 4:08:28.077 [025] [S] Enabled pools: count: 42, EnabledPools: Zpool, MiningPoolHub
18.01.2018 4:08:28.092 [025] [S]Profitability information:
MiningPoolHub [Equihash] [Zclassic (ZCL)], Url: stratum+tcp://europe.equihash-hub.miningpoolhub.com:17023, Profit: 0,00072000414218971, Priority: 0
Zpool [Equihash], Url: stratum+tcp://equihash.mine.zpool.ca:2142, Profit: 0,00056390852, Priority: 0
MiningPoolHub [CryptoNight], Url: stratum+tcp://europe.cryptonight-hub.miningpoolhub.com:17024, Profit: 0,0003396555888, Priority: 0

18.01.2018 4:08:28.092 [025] [S]Managed Profit Switching processing: Miner-1, IsRunning: False
18.01.2018 4:08:28.092 [025] [S] Profitability, poolChanged: False, Algorithm: Equihash -> Equihash, EngineType: ZecClayMiner ->ZecClayMiner, EngineSubType: Disabled ->Disabled, AutoDownload: True, EnginePath:

ruplikminer

jr. member

Activity: 504

Merit: 3

I would really need someone to explain me how the automatic switch works.

I am using coinwarz for statistics. I have bought a paid API key. I set the time to 5 minutes but with a minimum of 15% change.

In awesome miner there are 2 sections with statistics: the COINS and the ONLINE SERVICES. Wich of the 2 awesome miner uses to change and switch to another coin/algo?

Also, sometimes awesome miner starts mining a coin that is not the most profitable. I check on the COINS or on the ONLINE SERVICES sections and I see there that there is another more profitable coin to extract. Then I have to switch manually.

I already did a full Benchmark of my graphic card.

Any clarification would be really appreciated!

derbien

newbie

Activity: 12

Merit: 1

Quote from: soothaa on January 17, 2018, 02:31:44 PM

I've got my first version of my Masternode plugin working.. would this be useful to anyone out there?

https://i.imgur.com/iaUhVQ8.png
https://i.imgur.com/iaUhVQ8.png

Yes

ruplikminer

jr. member

Activity: 504

Merit: 3

Quote from: spinter on January 17, 2018, 04:16:29 PM

Quote from: ruplikminer on January 17, 2018, 01:32:55 PM

Quote from: spinter on January 17, 2018, 12:44:04 PM

Quote from: ruplikminer on January 17, 2018, 12:12:11 PM

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

Amazing thanks!!!!!!

Will this lower the perfromances with the other engines/algo?

im use Ccminer 8.18-KlausT CUDA9.1

How can I install the Ccminer 8.18-KlausT in Awesome miner?

ruplikminer

jr. member

Activity: 504

Merit: 3

Quote from: spinter on January 17, 2018, 12:44:04 PM

Quote from: ruplikminer on January 17, 2018, 12:12:11 PM

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

I tried to downgrade from 9 to 7.5 but even if I have installed the 7.5 it sitll shows 8.0... I tried removing all the drivers and reinstalling. Always the same. Seems like I can't downgrade more than 7.5
any help would be appreciated

acyclovir

newbie

Activity: 45

Merit: 0

Hello Patrike.

Is there any possibility to include Mining-Dutch.nl pool, in managed profit switching?

spinter

newbie

Activity: 44

Merit: 0

Quote from: ruplikminer on January 17, 2018, 01:32:55 PM

Quote from: spinter on January 17, 2018, 12:44:04 PM

Quote from: ruplikminer on January 17, 2018, 12:12:11 PM

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

Amazing thanks!!!!!!

Will this lower the perfromances with the other engines/algo?

im use Ccminer 8.18-KlausT CUDA9.1

snesterkov

newbie

Activity: 3

Merit: 0

Hello.
There are many TCP connections to the API port 4068 with External miner manager.

Quote

> netstat -ao | find "4068" | more
TCP 127.0.0.1:4068 apps:0 LISTENING 9800
TCP 127.0.0.1:4068 na1r:51016 TIME_WAIT 0
TCP 127.0.0.1:4068 na1r:51017 TIME_WAIT 0
TCP 127.0.0.1:4068 na1r:51018 TIME_WAIT 0
[...]

The same problem with Profit miner manager to the port 4030

Quote

> netstat -ao | find "4030" | more
TCP 0.0.0.0:4030 apps:0 LISTENING 8664
TCP 127.0.0.1:4030 na1r:50301 TIME_WAIT 0
TCP 127.0.0.1:4030 na1r:50302 TIME_WAIT 0
TCP 127.0.0.1:4030 na1r:50303 TIME_WAIT 0
[..]

This is very critical to CPU usage! With Standart miner manager there is no such a problems.

soothaa

hero member

Activity: 1151

Merit: 528

I've got my first version of my Masternode plugin working.. would this be useful to anyone out there?

https://i.imgur.com/iaUhVQ8.png

Thekingace

newbie

Activity: 22

Merit: 0

Is it possible to mine Neoscrypt with AMD gpus on the profit managed miner? I can't seem to get it to work.

ruplikminer

jr. member

Activity: 504

Merit: 3

Quote from: spinter on January 17, 2018, 12:44:04 PM

Quote from: ruplikminer on January 17, 2018, 12:12:11 PM

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

Amazing thanks!!!!!!

Will this lower the perfromances with the other engines/algo?

spinter

newbie

Activity: 44

Merit: 0

Quote from: ruplikminer on January 17, 2018, 12:12:11 PM

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

ruplikminer

jr. member

Activity: 504

Merit: 3

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

sergw

member

Activity: 159

Merit: 12

regarding "Progress field" of miners Tab customization:

1) how may convert status.SecondsSinceStart to hours/days/month, do you support complex conditions like:
if SecondsSinceStart < (60*5): show as seconds
else if SecondsSinceStart < (3600*3): show as minutes
else if SecondsSinceStart < (3600*24*3): show as hours
else if SecondsSinceStart < (3600*24*90): show as days
else : show as months

Basically the same way as you show Uptime in Status Field, or the way to show Uptime in Status in "Compact List" mode?

2) Is there a way to customize Speed Tab? say use different colors for speed value (yellow if less 10TH, red if less 5 TH)

Dalba

newbie

Activity: 92

Merit: 0

Quote from: patrike on January 16, 2018, 05:42:30 AM

Quote from: Dalba on January 16, 2018, 04:39:26 AM

Quote from: patrike on January 08, 2018, 04:12:42 AM

Quote from: Dalba on January 08, 2018, 03:50:06 AM

Hello Patrike,
I noticed something a little annoying regarding coins statistics. If i set AM to use 24h average statistics to decide what to mine, then the price of coins displayed in the bottom bar change to an average price on the last 24h too.
Would it be possible to have the coins listed in bottom bar to always list the current price even if i use 24h average for profit switching ?

That's a good point. This will consider making this change.

Hello Patrike,
Just for remember, could you please look at this small issue regarding statistics ?

I have a note about this already, so it has not been forgotten. I'm simply getting a very large number of questions and feature requests these days, so some feature request will take a little time to get implemented. I do however appreciate all feedback and comments, so let's continue working together on making the software even better. Thanks!

I'm very happy with AM as it is now, so if we can help make the program even better, i'll be even happier ! In this way, could you please give possibility to override profit switching in the profit profile group window too ? The one we can see below :

http://www.hostingpics.net/viewer.php?id=462130Rigpool.jpg

As you can see in the picture, i like to define a profit switching profile for each type of graphic card i own. As my rigs have different type of graphic cards, i then define a profit group to define my rigs. This way each rig has very accurate statistics regarding hashrates and profits. So in my case it would be better to be able to override profit switching settings at profit group level.

iceTony

copper member

Activity: 30

Merit: 0

Hello. cant see interface "Interface offline" Can anyone help me, i will pay

Telegram @Nebemires

jabchest

newbie

Activity: 11

Merit: 0

Do you plan to support Dragonmint once it's released?

chillware

newbie

Activity: 4

Merit: 0

@Patrike - Feature Suggestion

Can you add logic to detect when the currently mining coin/algo has dropped X% below whatever is currently at the top of the profit list? I have 30 min switching setup, but often coins/algo's are only profitable for a few minutes then drop waaaaaaaaay down the list, mining unprofitably for most of the time. It would be AWESOME for AwesomeMiner to detect this automatically and initiate a switch.

Thank you!

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 445. (Read 703512 times)