Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 460. (Read 703113 times)

I was trying to get profit switching info for my x11 asic miners for Granatgas. This support is in the release notes for v4.09, but I can't seem to get it working. Granatgas shows $0.00 for unspec x11. Only nicehash or zpool seem to show profit info for asics..
I have the Pro edition if that helps?

I've never used Hamachi before, but I have used Neorouter and OpenVPN on a personal level.  Of course at an enterprise level, I've setup and used much more advanced VPN implementations.

That being said, the instructions for Hamachi look like they have you change the metric of the network adaptor, using a 3rd party tool to create a mesh network, and adjusting your OS level firewall, and finally doing port forwarding on your edge firewall.  That's a lot of instructions... and seems like it's easy to miss something.

Have you tried Neorouter?  I haven't used it in a few years, but I remember it was pretty much plug and play.

These days I use OpenVPN, which requires a little more knowledge on how to set it up on your edge routers, but once it's setup... it just works too.  I use OpenVPN to remote back into my home network when I travel.  It's very robust.

Are your 2 rigs behind another router/firewall?  If so, then you might be able to setup a site-to-site OpenVPN tunnel between your two routers.  There are plenty of guides out on the internet for this.

NeoRouter free worked for me.

Are you getting the expected hashrate out of your 1060s considering the algorithm and over/underclocks you are running?  If so, then it may be that AM isn't able to read the activity of those cards well.  I've seen this on HWInfo as well.

What mining software, coin, and algorithm were you mining when you were getting crashes?  Using any over/underclocks?

It seems that the stratum implementations that a lot of pools use is not compatible with ccminer.  Just as a test, leave off the "stratum+tcp://" part... and just use the servername:port.

Or, try to use Excavator as your mining software, as Nicehash's miner would certainly be compatible with their own stratum one would think.

I bought premium edition awesome miner and very useful software, but I have a question.
I've a farm and 2 rig at home behind router. I read this link: http://www.awesomeminer.com/help/remotenetworks.aspx , but not working (hamachi). I tryed some ways, but nothing.
Can everyone help me how to set my 2 rig which is outside minig farm's LAN and behind router?

Guys a quick question, my GPUs have an indicated Activity level of between 4% and 10% each in AM. Is this as it should be? had a quick search but couldn't see any obvious threads on the subject. Example; right now I have 5x GTX 1060 6GBs mining NeoScript and AM states 7% Activity and 16% Intensity against each GPU. Any clarification appreciated.

Thanks ,is it stable? with like 1k+?

I see there is a version 2.2.4 of ccminer available.  When I click update software definitions it says there are no updates available.  Should it find the 2.2.4 and update automatically?

Guys, anyone having any issues with the latest version of AW (4.3.1) and Nvidia GPU mining ?

I loaded it up on my test rig with one GTX1070 a few days ago and the Nvidia drivers crash after a few hours and the machine eventually grinds to a halt. Throws the usual nvlddmkm errors in the windows system log.

I'm just running a base config profit mining on MPH, so nothing fancy.

I uninstalled and re-installed the old version I was running (4.2.3) and it seems stable again.

maybe just unlucky, MPH is a known issue and pool op probably ain't changing that. Nicehash is well...maybe still trying to get back on its feet.

I'm getting same error as you are on the NH EU servers, all other 5 locations USA,CHN,IND,BRZ,JPN all give me stratum_line_recv_failed....given the wallet has issues on one of the largest exchange for quite some time (and frequently)...can't really test on other pools such as nanopool without getting a sia address first...

MPH and nicehack at the same time?

your issue with Sia on MPH has been answered b4 on another thread
https://bitcointalksearch.org/topic/m.19115045

it's MPH's issue with the pool's implementation

i get something similiar from miningpoolhub, but i see it's only on sia algo:
Starting Diagnostics. Awesome Miner version: 4.3.1
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: CcAlexisMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Kfadrat\AppData\Local\AwesomeMiner\ccminer-alexis_1\ccminer alexis-1.0 windows\ccminer.exe
C:\Users\Kfadrat\AppData\Local\AwesomeMiner\ccminer-alexis_1\ccminer alexis-1.0 windows\ccminer.exe  -a sia -o stratum+tcp://hub.miningpoolhub.com:17022 -u kfadrat.kfadrat -p x -b 0.0.0.0:4028   (WindowMode: ConsoleFormat, EngineType: CcAlexisMiner, IsProfitMiner: True)
Configuration:

> *** ccminer alexis-1.0 for nVidia GPUs from alexis78@github ***
> *** Built with VC++ 2013 and nVidia CUDA SDK 7.5 (Recommended)
>
> *** Based on tpruvot@github ccminer
> *** Originally based on Christian Buchner and Christian H. project
> *** Include some of the work of djm34, sp, tsiv and klausT.
>
> [2018-01-06 09:30:48] Starting on stratum+tcp://hub.miningpoolhub.com:17022
> [2018-01-06 09:30:48] NVML GPU monitoring enabled.
> [2018-01-06 09:30:48] 1 miner thread started, using 'sia' algorithm.
Mining Engine Process started, PID: 9400

====================================================================================================
> [2018-01-06 09:30:49] Stratum extranonce answer id was not correct!

====================================================================================================
Stopping miner process ...
Stopping Mining Software
Diagnostics completed

ok so just read the path in the diag output.

did a copy/paste from a machine that was working to the broken machine... BAM!  works now.

WTF!   AM should have tried to redownload the app, maybe its a bug?  idk either way  thanks for pointing me to the diag file which helped solve the issue!

Says it can't find the file.   I've even deleted the remote app, rebooted, and reinstalled

It's probably not in the most eye-catchy place but it is on the site on the about page

http://www.awesomeminer.com/about.aspx

If you right-click the miner from the base station and select Diagnostics, what does it say?  Can you post it here?  Also, what kind of GPUs are you running?

Why does the website state they have email support, yet they provide no email address?

Anyways i guess ill post here for now...

The miner remote app is installed on the client

The miner base station on another machine is able to "Test Connection" to the client
The miner base station is able to see the video cards on the client
The miner base station can take console/desktop snapshots no error.

When i click start on the base station for said client i get the "Failed to start miner process"

I have two of these machines doing this.  my other 9 work just fine.

They were all built the same.

Firewall is off
Defender is disabled
no other AV running

I have the premium version so im allowed 20 miners...