https://imgur.com/a/K48Pv
Please allow password arguments for Hashrefinery so I can choose payout coin.
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 513. (Read 703113 times)
November 21, 2017, 08:25:25 PM
November 21, 2017, 05:54:54 PM
Hi, Patrick. the hashrefinery pool changed the percentage from 1% to 1.25%, does it need to change something in the settings to work on a more profitable pool?
November 21, 2017, 02:40:49 PM
Recently AwesomeMiner began to stop mining after switching to sgminer (I'm on AMDs). From logs it seems to try and restart it a few times, each time complaining about
Process already closed
and
No connection could be made because the target machine actively refused it 127.0.0.1:4028
and then it just gives up. Restart on offline detection didn't help.
From the logs, it doesn't try to switch back to other miners, like EthDcrMiner, it just keeps pounding at the Sgminer until it gives up. I am able to start Sgminer manually using the same command from the log and it works fine. Also I've seen it working fine before with AwesomeMiner. I've checked and Firewall isn't a problem. Access to sgminer.exe is allowed on all ports and I see it listening on 4028 when running.
I didn't find much on this on the net, so coming to the source. It goes down every day, with a 100% repro rate, so I'm loosing hours of mining. Any ideas? Here is the log snippet.
Process already closed
and
No connection could be made because the target machine actively refused it 127.0.0.1:4028
and then it just gives up. Restart on offline detection didn't help.
From the logs, it doesn't try to switch back to other miners, like EthDcrMiner, it just keeps pounding at the Sgminer until it gives up. I am able to start Sgminer manually using the same command from the log and it works fine. Also I've seen it working fine before with AwesomeMiner. I've checked and Firewall isn't a problem. Access to sgminer.exe is allowed on all ports and I see it listening on 4028 when running.
I didn't find much on this on the net, so coming to the source. It goes down every day, with a 100% repro rate, so I'm loosing hours of mining. Any ideas? Here is the log snippet.
Code:
[s][s]11/21/2017 8:36:06 AM.034 [005] [S][ManagedMiner#2 - My Profit Miner] Starting Mining Software
11/21/2017 8:36:06 AM.034 [005] [S][ManagedMiner#2 - My Profit Miner] Setting up Miner Engine. Instance: 1
11/21/2017 8:36:06 AM.034 [005] [S][ManagedMiner#2 - My Profit Miner] Engine Type: SgMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
11/21/2017 8:36:06 AM.034 [005] [S]EngineSetup: SgMiner
11/21/2017 8:36:06 AM.037 [005] [S][ManagedMiner#2 - My Profit Miner] Prepare Configuration for pool
11/21/2017 8:36:06 AM.037 [005] [S][ManagedMiner#2 - My Profit Miner] : GetStaticSortedPools, Enginetype: SgMiner, Algorithms: Scrypt, ScryptAN, X11, X13, X14, X15, Groestl, Nist5, NeoScrypt, SHA3, Lyra2RE, Qubit, WhirlpoolX, Quark, Axiom, Lyra2REv2, Decred, Blake2b, Lbry, Pascal, X11Gost
11/21/2017 8:36:06 AM.037 [005] [S][ManagedMiner#2 - My Profit Miner] : GetStaticSortedPools, ignoring pool:stratum+tcp://us-east.ethash-hub.miningpoolhub.com:17020, Ethereum
11/21/2017 8:36:06 AM.037 [005] [S][ManagedMiner#2 - My Profit Miner] : GetStaticSortedPools, ignoring pool:stratum+tcp://us-east.equihash-hub.miningpoolhub.com:17023, Equihash
11/21/2017 8:36:06 AM.037 [005] [S][ManagedMiner#2 - My Profit Miner] : GetStaticSortedPools, ignoring pool:stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:17024, CryptoNight
11/21/2017 8:36:06 AM.037 [005] [S][ManagedMiner#2 - My Profit Miner] Prepare Configuration for Device Profile
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, Intensity: 16
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, RawIntensity:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, XIntensity:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuEngine:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuFan:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuMemclock:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuPowertune:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuVoltage:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, Vectors:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, Worksize: 256
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, LookupGap:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, ThreadConcurrency:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, Shaders: 2048
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, TempCutoff:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, TempOverheat:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, TempTarget:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuThreads: 2
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuPlatform:
11/21/2017 8:36:06 AM.038 [005] [S]Preparing device setting, GpuDyninterval:
11/21/2017 8:36:06 AM.038 [005] [S][ManagedMiner#2 - My Profit Miner] Configuration preparations done
11/21/2017 8:36:06 AM.043 [005] [S]ChannelFactoryProvider: Create Channel Factory: IntelliBreeze.Maintenance.Service.Contracts.ServiceContracts.ISecurityService
11/21/2017 8:36:06 AM.074 [005] [S][ManagedMiner#2 - My Profit Miner] Added rule for: C:\Users\Michael\AppData\Local\AwesomeMiner\sgminer-5.6.1-nicehash-51-windows-i386_1\sgminer.exe
11/21/2017 8:36:06 AM.074 [005] [S][ManagedMiner#2 - My Profit Miner] C:\Users\Michael\AppData\Local\AwesomeMiner\sgminer-5.6.1-nicehash-51-windows-i386_1\sgminer.exe --config awesome.conf --algorithm neoscrypt (WindowMode: ConsoleFormat, EngineType: SgMiner, IsProfitMiner: True)
11/21/2017 8:36:06 AM.074 [005] [S][ManagedMiner#2 - My Profit Miner] Configuration:
{
"pools": [
{
"name": "MiningPoolHub [NeoScrypt]",
"nfactor": "10",
"algorithm": "neoscrypt",
"url": "stratum+tcp://hub.miningpoolhub.com:17012",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [Groestl]",
"nfactor": "10",
"algorithm": "groestlcoin",
"url": "stratum+tcp://hub.miningpoolhub.com:17004",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [SHA-3]",
"nfactor": "10",
"algorithm": "maxcoin",
"url": "stratum+tcp://hub.miningpoolhub.com:17003",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [Lyra2REv2]",
"nfactor": "10",
"algorithm": "lyra2rev2",
"url": "stratum+tcp://hub.miningpoolhub.com:17018",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [Blake 2b]",
"nfactor": "10",
"algorithm": "sia",
"url": "stratum+tcp://hub.miningpoolhub.com:17022",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [Qubit]",
"nfactor": "10",
"algorithm": "qubitcoin",
"url": "stratum+tcp://hub.miningpoolhub.com:17014",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [Scrypt]",
"nfactor": "10",
"algorithm": "zuikkis",
"url": "stratum+tcp://hub.miningpoolhub.com:17001",
"user": "micwebnet.dev",
"pass": "x"
},
{
"name": "MiningPoolHub [X11]",
"nfactor": "10",
"algorithm": "darkcoin-mod",
"url": "stratum+tcp://hub.miningpoolhub.com:17007",
"user": "micwebnet.dev",
"pass": "x"
}
],
"api-port": "4028",
"intensity": "16",
"worksize": "256",
"shaders": "2048",
"failover-only": true,
"gpu-threads": "2",
"api-listen": true,
"api-allow": "W:127.0.0.1/32",
"expiry": "120",
"log": "5",
"queue": "1",
"scan-time": "60",
"temp-hysteresis": "3"
}
11/21/2017 8:36:06 AM.381 [005] [S]Saving configuration to: C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml.tmp
11/21/2017 8:36:06 AM.394 [005] [S]--> C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml
11/21/2017 8:36:06 AM.396 [005] [S][ManagedMiner#2 - My Profit Miner] Mining Engine Process started, PID: 5096
11/21/2017 8:36:07 AM.661 [009] [E]Failed to process API request (time: 1003 ms): {"command":"config"}
No connection could be made because the target machine actively refused it 127.0.0.1:4028
11/21/2017 8:36:13 AM.688 [028] [E]Failed to process API request (time: 1003 ms): {"command":"config"}
No connection could be made because the target machine actively refused it 127.0.0.1:4028
11/21/2017 8:36:20 AM.399 [005] [W][ManagedMiner#2 - My Profit Miner] process not running. Too many restarts...
11/21/2017 8:36:20 AM.399 [005] [S][ManagedMiner#2 - My Profit Miner] Stopping...
11/21/2017 8:36:20 AM.399 [005] [S][ManagedMiner#2 - My Profit Miner] Executing API command: Quit
11/21/2017 8:36:21 AM.400 [005] [E]Failed to process API request (time: 1001 ms): {"command":"quit"}
No connection could be made because the target machine actively refused it 127.0.0.1:4028
11/21/2017 8:36:22 AM.402 [005] [S][ManagedMiner#2 - My Profit Miner] Performing stop
11/21/2017 8:36:22 AM.402 [005] [S][ManagedMiner#2 - My Profit Miner] Stopping Mining Software
11/21/2017 8:36:22 AM.402 [005] [S] Process already closed[/s][/s]
November 21, 2017, 12:13:25 PM
Please see the Variables section on this page:
http://www.awesomeminer.com/help/notifications.aspx
These variables works for any notifications and not only for Webhooks.
Excellent! Great! Exactly what is needed.http://www.awesomeminer.com/help/notifications.aspx
These variables works for any notifications and not only for Webhooks.
In the future it would be great to see a variable "event type"
November 21, 2017, 07:47:25 AM
On profit switching for external miners (antminers), what is the recommended switching interval(minutes)?
Granatgas shows $0 value for current profit(pool is alive but website is dead the last couple days), will the profit switcher still switch over if true value is higher than other pools?
Granatgas shows $0 value for current profit(pool is alive but website is dead the last couple days), will the profit switcher still switch over if true value is higher than other pools?
November 20, 2017, 08:47:14 PM
and make sure next time to delete all the folders including some folders in the hidden folders that could cause some of the corruption or been the real cause, the uninstall for windows doesn't all ways remove it all ...
https://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
it remembered all the settings. because of those files and folders in the hidden folders which btw you can save an use with a clean install of windows which i do it saves all your settings including the activation of Awesome miner.
The path is C:\Users\your username for windows\AppData\Roaming\AwesomeMiner/ConfigData.xml the xml file stores all your setting for Awesome miner. those folders are all ways hidden unless you customize you win 10 install.wim file or make them show. i have them showing all the time ....even after a clean install ..
Good to know this if it happens any other time. For precautions, I exported settings so I'm safe if it happens again https://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
it remembered all the settings. because of those files and folders in the hidden folders which btw you can save an use with a clean install of windows which i do it saves all your settings including the activation of Awesome miner.
The path is C:\Users\your username for windows\AppData\Roaming\AwesomeMiner/ConfigData.xml the xml file stores all your setting for Awesome miner. those folders are all ways hidden unless you customize you win 10 install.wim file or make them show. i have them showing all the time ....even after a clean install ..
check this out http://www.awesomeminer.com/help.aspx under Maintenance it's explained even better...
tips
November 20, 2017, 06:22:25 PM
Hi Patrike
Please add the ability to add a new pool and a group of pools in the selected group of miners. In the current version, there is only the possibility of replacing pools in the entire group of miners.
If you want add new pool to miner group with 20 devices, its a little difficult now)))
Regards
Please add the ability to add a new pool and a group of pools in the selected group of miners. In the current version, there is only the possibility of replacing pools in the entire group of miners.
If you want add new pool to miner group with 20 devices, its a little difficult now)))
Regards
November 20, 2017, 05:43:37 PM
Hi Patricke, thank you for wonderful program of yours.
We are using it on hundreds of miners now and expanding.
Can you please add this CUDA miner asap?
We were testing it thoroughly last couple of days and have to say, it is a bit faster 2 - 5% (GTX 1080ti), a bit less power hungry (-5 to 10%) and definitely more stable than EWBF.
Has API (telemetry server)
should be straightforward process
Thank you
We are using it on hundreds of miners now and expanding.
Can you please add this CUDA miner asap?
We were testing it thoroughly last couple of days and have to say, it is a bit faster 2 - 5% (GTX 1080ti), a bit less power hungry (-5 to 10%) and definitely more stable than EWBF.
Has API (telemetry server)
should be straightforward process
Thank you
what miner are you referring to?
November 20, 2017, 04:55:39 PM
Hi Patricke, thank you for wonderful program of yours.
We are using it on hundreds of miners now and expanding.
Can you please add this CUDA miner asap?
We were testing it thoroughly last couple of days and have to say, it is a bit faster 2 - 5% (GTX 1080ti), a bit less power hungry (-5 to 10%) and definitely more stable than EWBF.
Has API (telemetry server)
should be straightforward process
Thank you
*EDIT: Sorry....
dstm's ZCash Cuda miner
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765
We are using it on hundreds of miners now and expanding.
Can you please add this CUDA miner asap?
We were testing it thoroughly last couple of days and have to say, it is a bit faster 2 - 5% (GTX 1080ti), a bit less power hungry (-5 to 10%) and definitely more stable than EWBF.
Has API (telemetry server)
should be straightforward process
Thank you
*EDIT: Sorry....
dstm's ZCash Cuda miner
https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765
November 20, 2017, 03:35:45 PM
Anyone else having issues with upgrading to 4.2?
First, Awesome gave me a red notification in the "Menu" saying it's got an update, tried updating it and after update process I saw that it didn't run automatically. Tried running the shortcut and it said the file is missing. Tried fresh install and it says "The cabinet file 'media1.cab' is corrupt and cannot be used". Tried downloading several times, different download locations, etc and I can't install it. Is the package really corrupt or am I the only one with this issue? Win10, x64 setup.
Thanks
Edit: It seems there was something weird with the registry. I manually searched for Awesome miner registry entries and deleted them. After that, it installed normally, even remembered all the settings.
First, Awesome gave me a red notification in the "Menu" saying it's got an update, tried updating it and after update process I saw that it didn't run automatically. Tried running the shortcut and it said the file is missing. Tried fresh install and it says "The cabinet file 'media1.cab' is corrupt and cannot be used". Tried downloading several times, different download locations, etc and I can't install it. Is the package really corrupt or am I the only one with this issue? Win10, x64 setup.
Thanks
Edit: It seems there was something weird with the registry. I manually searched for Awesome miner registry entries and deleted them. After that, it installed normally, even remembered all the settings.
and make sure next time to delete all the folders including some folders in the hidden folders that could cause some of the corruption or been the real cause, the uninstall for windows doesn't all ways remove it all ...
https://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
it remembered all the settings. because of those files and folders in the hidden folders which btw you can save an use with a clean install of windows which i do it saves all your settings including the activation of Awesome miner.
The path is C:\Users\your username for windows\AppData\Roaming\AwesomeMiner/ConfigData.xml the xml file stores all your setting for Awesome miner. those folders are all ways hidden unless you customize you win 10 install.wim file or make them show. i have them showing all the time ....even after a clean install ..
November 20, 2017, 03:32:53 PM
How to hide my miner from Awesome Miner stats reading by IP?
November 20, 2017, 03:31:31 PM
Hi Patrike,
When this happens :
it leads to this issue :
Miner doesn't gets restarted as AwesomeMiner did not detect the crash.
Offline rules don't do anything, it just stays offline like this forever.
It's not a crash, but it should trigger the offline detection rule. It could probably be detected by the "Accept Progress" rule as well if enabled.When this happens :
it leads to this issue :
Miner doesn't gets restarted as AwesomeMiner did not detect the crash.
Offline rules don't do anything, it just stays offline like this forever.
Can you please share some details of how the Offline Detection rule is configured? That will help me understand why it didn't work as expected. Thanks!
November 20, 2017, 03:28:39 PM
Awesome Miner version 4.2
- Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.
Be so kind, where can I find the details?- Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.
Because on Notifications help page on the web site I found just one sentence and nothing new:
Code:
Webhooks
Webhooks will make a HTTP request to the specified URL for every notification. The default setting is to use POST, which is required to include the notification content in the HTTP body.
Thank you!
http://www.awesomeminer.com/help/notifications.aspx
These variables works for any notifications and not only for Webhooks.
November 20, 2017, 03:26:55 PM
Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.
all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..
I do get many requests for features and mining software, and I try to implement the most requested features. .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner.. Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?
That's just it, i'm not even getting ZM to launch via Awesome Miner. Do i have to enter all the command line options, filled out with the information entirely (like server/pool, workername etc)? How would that work if I want Awesome Miner to pass the information based on which coin I want to mine via Profit Switching? The documentation around importing custom mining software is lacking IMO, any resources you can point me to that have more detailed information?
When using a Generic Miner, you must specify the full command line yourself. Awesome Miner has no idea about how to set pools configuration or anything else. This is also stated in the documentation for the Generic Miner feature:
http://www.awesomeminer.com/help/genericminer.aspx
Please don't get me wrong here, I'm not saying that a Generic Miner is the best concept ever - but it's a working way to launch any mining software as long as you provide the correct command line parameters to it.
November 20, 2017, 11:42:06 AM
Hi Patrike,
When this happens :
it leads to this issue :
Miner doesn't gets restarted as AwesomeMiner did not detect the crash.
Offline rules don't do anything, it just stays offline like this forever.
When this happens :
it leads to this issue :
Miner doesn't gets restarted as AwesomeMiner did not detect the crash.
Offline rules don't do anything, it just stays offline like this forever.
November 20, 2017, 05:36:28 AM
Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.
all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..
I do get many requests for features and mining software, and I try to implement the most requested features. .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner.. Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?
That's just it, i'm not even getting ZM to launch via Awesome Miner. Do i have to enter all the command line options, filled out with the information entirely (like server/pool, workername etc)? How would that work if I want Awesome Miner to pass the information based on which coin I want to mine via Profit Switching? The documentation around importing custom mining software is lacking IMO, any resources you can point me to that have more detailed information?
download DTSM miners @ https://drive.google.com/file/d/1Zmq6ZuOStO-bNjK-4XKacKpe66hk1Qwt/edit unzip it .
Set up a Managed miner,if you don't know how to follow the help me here http://www.awesomeminer.com/help/managedwizard.aspx then
Highlight the managed miner you want to use with DTSM miners then right click it, click Properties, sense the miner can only use the Eqihash Algorithm set it to Eqihash for Algorithm then under software set that to either EWBF CUda Zcash miner or Generic miner for now we will use EWBF CUda Zcash miner to get it started .... for path check mark Specify existing installation path .. for path you can find the software miners two ways either use the Browse button or use the upload custom software at the top under tools in the main awesome miner window, find the DTSM miner folder and open it then click on the zm.exe then under mining pools you should have pools set up with your managed miner pick one it will only use pools that can mine coins from the Eqihash algorithm or Zcash type coins ....hit ok .. then right click the miner you just set up to use DTSM miners in the main AM window and hit start .. it should start mining with no states with Awesome miner that's because DTSM miners has Java for api access while awesome miner only uses API for api Access, if that's makes sense ....
and for DTSM miner to work you also might need this https://www.microsoft.com/en-us/download/details.aspx?id=48145
I did try with Generic miner but got a pop up error about it might be the wrong miner and you can add command lines for Generic miner by right clicking the managed miner you just set up to use DTSM miner then under mining engine for soft ware pick the Generic miner from the list ...but this time you might need to start it with bat file commands
some thing like this
zm --server your pool --port that pools port --user your user for that pool
in the bat file area listed under add command lines on the left hand side bar there is a list with links after you click Properties click add command lines . can't say for sure sense i do have it working as i type as a replacement miner for EWBF CUda Zcash miner, i did it the way i posted above but sense i can't see any stats at all unless i look at the black screen UI it mines in, I will stay with EWBF CUda Zcash miner for now ... Btw that's the same way it will work with Generic miner if you get it working with Generic miner with no states an basic features/function...you may be able to add it as a custom software miner if it has the right APi access which right now AM doesn't support Java API and i bet that can be a bitch to put in, so i don't blame Patrike if he doesn't do it right now ...
and Patrike here is the Diagnostics report you asked for using Generic miner, I'll be honest i have no plans to use DTSM miners unless it's added as one of the main software miners, so i won't brother trying to get it to work with Generic miner,i know why it won't an I can get it to work with Generic miner or know how to but sense i got it working as a replacement for EWBF's CUDA Zcash miner, no need to, so all good but will help TS auto switching with pools on a timer not using profit switching, if you need it ...
Code:
Starting Diagnostics
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: GenericMiner, Auto Download: False, EnginePath: C:\Users\Administrator\Desktop\zm_0.5.5_win\zm_0.5.5_win\zm.exe, Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Administrator\Desktop\zm_0.5.5_win\zm_0.5.5_win\zm.exe
C:\Users\Administrator\Desktop\zm_0.5.5_win\zm_0.5.5_win\zm.exe (WindowMode: ConsoleFormat, EngineType: GenericMiner, IsProfitMiner: False)
Configuration:
> ZM 0.5.5, dstm's ZCASH/Equihash Cuda Miner
>
> Usage:
> zm --server hostname --port port_nr --user user_name
> [--pass password] [options]...
>
> Stratum:
> --server Stratum server hostname
> prefix hostname with 'ssl://' for encrypted
> connections - e.g. ssl://mypool.com
> --port Stratum server port number
> --user Username / Workername
> --pass Worker password
>
> Options:
> --help Print this help
> --dev Space separated list of cuda devices
> --list-devices List available cuda devices
> --time Enable output of timestamps
> --logfile [=path] Append logs to the file named by 'path'
> If 'path' is not given append to 'zm.log' in
> current working directory.
> --noreconnect Disable automatic reconnection on network errors.
>
> --temp-target In C - If set, enables temperature controller.
> The workload of each GPU will be continuously
> adjusted such that the temperature stays around
> this value. It is recommended to set your fan speed
> to 100% when using this setting.
>
> --telemetry [=ip:port]. Starts telemetry server. Telemetry data
> can be accessed using a web browser(http) or by json-rpc.
> If no arguments are given the server listens on
> 127.0.0.1:2222 - Example: --telemetry=0.0.0.0:2222
> Valid port range [1025-65535]
> Example:
> zm --server servername.com --port 1234 --user username
Failed to start miner process: Process has exited, so the requested information is not available.
Failed to start miner in Diagnostics mode
Diagnostics completed
November 20, 2017, 04:44:32 AM
How to hide my miner from Awesome Miner stats reading by IP?
November 20, 2017, 03:49:42 AM
Awesome Miner version 4.2
- Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.
Be so kind, where can I find the details?- Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.
Because on Notifications help page on the web site I found just one sentence and nothing new:
Code:
Webhooks
Webhooks will make a HTTP request to the specified URL for every notification. The default setting is to use POST, which is required to include the notification content in the HTTP body.
Webhooks will make a HTTP request to the specified URL for every notification. The default setting is to use POST, which is required to include the notification content in the HTTP body.
Thank you!
November 20, 2017, 03:32:13 AM
* New trigger to detect low device count for a miner, to find out when a GPU is missing
After about 10 days I can report, that this future is not working properly. Often happens that miner falls, AM restarts them, all videocards are in place I see, but the trigger reports that there one GPU is missing.
But it was the other way around - first the trigger said that the card is lost and then the miner falls and restarted.
But anyway...
Maybe it's hard for me to explain it all. But the fact is that if the GPU is lost then it can not be restore without a full reboot of Windows. At least for Nvidia. I don't know about AMD.
Maybe you need to change the method of definition?
I used a different service earlier and never had false positives before.
Thank you!!
November 19, 2017, 10:26:13 PM
Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.
all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..
I do get many requests for features and mining software, and I try to implement the most requested features. .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner.. Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?
That's just it, i'm not even getting ZM to launch via Awesome Miner. Do i have to enter all the command line options, filled out with the information entirely (like server/pool, workername etc)? How would that work if I want Awesome Miner to pass the information based on which coin I want to mine via Profit Switching? The documentation around importing custom mining software is lacking IMO, any resources you can point me to that have more detailed information?
Jump to: