Author

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 509. (Read 703512 times)

hero member
Activity: 1151
Merit: 528
Any ETA for supporting XMR-Stak's new unified version?  That's pretty much all I'm running these days.  I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner.  But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.

I have this written and running well.

Please elaborate.

I threw together a quick app last night to emulate a Claymore API to serve as a bridge between AM and XMR-Stak.  Was quite easy actually and I think will work well enough for now.  It's pretty cool to control XMR-Stak and see hash rates and profit show up in AM.  I would like to also do the same for Cast XMR but I can't find any way to get hash rates out of it.
Same, just what you did there except I used the CCminer API.

CAST has no API to use, you're stuck using STAK for the time.
newbie
Activity: 12
Merit: 0

Does it run with out using Awesome miner ? ....if not what is the popup error it gives with out Awesome miner you may need to install something like:  vc_redist.x64.exe I have noticed in the past if something is not installed  on your PC Awesome won't work with some soft ware miner an not tell you why or everything, you many need to run it directly to see if there is a error of some kind the miner may still shut down without awesome running, if it does then it's a setting you need to find out what that is ... i have also had some pools not work well with awesome miner running but that same pool will if i don't use awesome miner with the same settings i used with awesome miner ..

This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3)below could be why the two PC don't have everything they need and the new one does ? .

Does it run with out using Awesome miner ? ....if not what is the popup error it may give with out Awesome miner you may need to install something like:  vc_redist.x64.exe on those two pc.

or wait for the next update of Awesome to come out with Dstm Zcash Miner support that software miner does work  better then EWBF software miner or seems to, the only reason i don't use it now is I like Using Awesome miner more .

I have a mix of 4 Nv cards with a 1070 ti coming some time next week.
an i have  two AMD rigs with 4 cards each i may add one more card each to sense the prices for Amd cards are dropping in the US again .


Hi,
It runs smooth even with AM when run manually. It only happen when Profit switcher changes from a coin to another with Equihash (not everytime).
Therefore I asked Patrike for his help.
But anyway thanks for your suggestion !!
I've identified a scenario where the Offline Detection didn't work for Managed Miners, and I think this was the scenario you were running into before. The next version will correct this.

Hi, I updated to ver. 4.2.1 but still facing same problem (I tried to set rule to find offline again, but didn't help).
Code:
2017/11/28 1:14:20.925 [019] [S]Managed Profit Switching processing: Rig01 Local, IsRunning: False
2017/11/28 1:14:20.925 [019] [S]  Profitability, poolChanged: False, Algorithm: Equihash -> Equihash, EngineType: ZecEwbfMiner ->ZecEwbfMiner, EngineSubType: Disabled ->Disabled, AutoDownload: True, EnginePath:
2017/11/28 1:14:20.925 [001] [S]CoinStore, Built in coin dictionary updated
2017/11/28 1:14:21.004 [001] [S]ServiceAdapter, trigger send settings
2017/11/28 1:14:21.035 [008] [S]Sending Miner Settings to Host: localhost
2017/11/28 1:14:21.035 [024] [S]Updating settings
2017/11/28 1:14:21.035 [024] [S]Current list of Managed Miners:
[ManagedMiner#2 - Rig01 Local]

2017/11/28 1:14:21.035 [024] [S]Current list of Clocking Profile:

2017/11/28 1:14:21.035 [024] [S]Current list of Active Miners:
[2] IsAttached: True, PID: 11240, InstanceId: 2

2017/11/28 1:14:21.035 [024] [S]Saving configuration to: C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml.tmp
2017/11/28 1:14:21.082 [024] [S]--> C:\ProgramData\AwesomeMinerService\ServiceDataIntegrated.xml
2017/11/28 1:14:37.959 [024] [E]Failed to process API request (time: 1016 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:14:44.101 [021] [E]Failed to process API request (time: 1031 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:14:50.180 [026] [E]Failed to process API request (time: 1031 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:14:56.384 [026] [E]Failed to process API request (time: 1141 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:02.494 [010] [E]Failed to process API request (time: 1031 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:08.558 [024] [E]Failed to process API request (time: 1016 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:14.781 [011] [E]Failed to process API request (time: 1089 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:21.021 [021] [E]Failed to process API request (time: 1012 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:27.276 [011] [E]Failed to process API request (time: 1152 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:33.488 [024] [E]Failed to process API request (time: 1179 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:39.547 [011] [E]Failed to process API request (time: 1005 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:45.616 [026] [E]Failed to process API request (time: 1004 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:51.678 [028] [E]Failed to process API request (time: 1003 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:15:57.739 [011] [E]Failed to process API request (time: 1008 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:16:03.871 [021] [E]Failed to process API request (time: 1097 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:16:10.072 [026] [E]Failed to process API request (time: 1131 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:16:16.166 [027] [E]Failed to process API request (time: 1010 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:16:22.213 [009] [E]Failed to process API request (time: 1003 ms): {"id":1, "method":"getstat"}

対象のコンピューターによって拒否されたため、接続できませんでした。 127.0.0.1:4029
2017/11/28 1:16:25.582 [001] [S]Saving configuration to: C:\Users\tailhead\AppData\Roaming\AwesomeMiner\ConfigData.xml.tmp
2017/11/28 1:16:25.658 [001] [S]CoinStore, Built in coin dictionary updated
2017/11/28 1:16:25.738 [001] [S]ServiceAdapter, trigger send settings
2017/11/28 1:16:25.746 [001] [S]--> C:\Users\tailhead\AppData\Roaming\AwesomeMiner\ConfigData.xml
2017/11/28 1:16:25.822 [008] [S]Sending Miner Settings to Host: localhost
2017/11/28 1:16:25.822 [009] [S]Updating settings
2017/11/28 1:16:25.823 [009] [S]Current list of Managed Miners:
[ManagedMiner#2 - Rig01 Local]
For the moment I changed miner software from EWBF to DSTM and it looks fine.
Just want to report.
full member
Activity: 675
Merit: 100
I found a workaround for AM not being able to launch XMR-Stak due to the elevated permissions requirements.  Need to set local group policy Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options -> User Account Control: Run all administrators in Admin Approval Mode to Disabled.  I don't like having to do that as it apparently weakens security but at least it works now.  Hopefully the Stak devs can find a permanent code fix.
full member
Activity: 675
Merit: 100
Any ETA for supporting XMR-Stak's new unified version?  That's pretty much all I'm running these days.  I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner.  But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.

I have this written and running well.

Please elaborate.

I threw together a quick app last night to emulate a Claymore API to serve as a bridge between AM and XMR-Stak.  Was quite easy actually and I think will work well enough for now.  It's pretty cool to control XMR-Stak and see hash rates and profit show up in AM.  I would like to also do the same for Cast XMR but I can't find any way to get hash rates out of it.
newbie
Activity: 32
Merit: 0
How do i set up my ASICs to do external profit switching? I think ive got the program configured right, not sure if i need the remote program too though? Awesome miner is so confusing :/
Hi,
Please follow this guide that both describes how the concept works and how to configure. It's basically just a click in a checkbox to setup:
http://www.awesomeminer.com/help/profitswitching.aspx#externalprofit

But how can it be just a click in a checkbox if it says in the documentation that it does not change the pools on the ASIC so you have to do this manually?  So what settings are needed on the ASICs? and why does it say in documentation "The setting for Nicehash, zpool and Mining Pool Hub in Options dialog, Profit switching section, should not be filled in for the External Profit Switcher"...

It underlines not to fill in some settings....so where do you fill in the information? what happens if you do fill in the info? will it not work lol, what information is it even talking about, this program and documentation is so confusing...
The main concept for the External Profit Switcher is actually very simple, and is described in in the very first point:
"For External Profit Switching, Awesome Miner will not add or change any pools on the miner. The profit switcher will only look at the pools already defined on the miner and change the priority of them. The priority is set based on profitability. "

What the External Profit Switcher is doing is to look at all the pools on the Antminer, and you can see these in the Pools tab at the bottom of the screen in Awesome Miner, and set priority based on profitability.

The pools you already defined on your Antminers (probably three of them) are already available, but you can of course add more. You can add them manually via Awesome Miner for example, where you define them via the "New pool" button in the toolbar. Then you can add it to your Antminer from the Pools tab at the bottom of the screen. All the pools you have on the Antminer will be considered by the profit switcher, but Awesome Miner will never do any add/remove pools operations automatically for you. The profit switcher is operating only by setting priorities that makes the Antminer change to the most profitable pool.

The settings about "Nicehash, zpool, ..." and so on are for the Managed Profit Switcher used for GPU mining, where you have many more complex scenarios because of multiple mining software and algorithms. None of these settings relate to profit switching on an Antminer. It doesn't matter if you fill in these settings, they will be completely ignored by the External Profit Switcher for your Antminer.


Ok thanks ive got it working for my L3+'s easily but when i try to add the default pools to my S9's no pools show up.  I know zpool has sha256, am i doing something wrong or?
hero member
Activity: 1151
Merit: 528
Any ETA for supporting XMR-Stak's new unified version?  That's pretty much all I'm running these days.  I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner.  But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.

I have this written and running well.
full member
Activity: 675
Merit: 100
Any ETA for supporting XMR-Stak's new unified version?  That's pretty much all I'm running these days.  I so desperately want to use Awesome Miner and XMR-Stak that I'm considering writing an adapter program to emulate Claymore so I can feed XMR-Stak's data back to Awesome Miner.  But I don't want to invest that time if support for XMR-Stak will be coming in the next month or two.

I have all implementation for connecting to it as an External Miner ready, but it's currently hidden.

For the moment I have given up on adding support for it as a Managed Miner because this mining software do so many strange things, for example:
- It requires running as Administrator, which creates all sorts of problems when you want to auto start it or launch it from another applications. It's probably the first mining software ever that has this behavior.
- It doesn't simply auto detect devices like other mining software. It looks like it tries to detect the first time and then update the configuration file, but it would be too complex for Awesome Miner to know if it will work or now. I can just imagine all the support question I will get around how this software handles its configuration file and prompting the user for input on the command line when something is missing.

Even if I only support it as an External Miner, you could still add your own Managed Software, point to the XMR-Stak for API compatibility and then create a Managed Miner for this where you point to your xmr-stak.exe file. As long as Awesome Miner is running as Administrator (or you have some configuration of Windows to bypass this), it will behave like any other Managed Miner - but you are in charge of all configuration yourself.

Any thoughts on how to get the AM Remote to be able to launch xmr-stak because of the elevated permissions issue?    That is the only thing holding me back from getting this all working.  I thought I had it working by having AM launch my adapter app and the app then launches XMR-Stak and that does work but the problem is when I stop the miner in AM it only shuts down my app and not XMR-Stak as well.  

If I'm not mistaken this XMR mining pool has a nice how to on how to set up XMR-Stak miner or Sgminer and use it with Windows, it tells you how to set up Group Policity's in windows 10 ... not sure if this is what you mean or are looking for .

I mine XMR with my GPU's from time to time.

 https://www.usxmrpool.com/#easy_mining_guide

This might help some I hate UAC i mean i  hate it and have it completely off Disabling it Through Group Policy's with no side effects ... with a clean install of Windows 10 Work station Pro.

https://community.ivanti.com/docs/DOC-16594




Thanks for the info.  I already had the "lock pages in memory" user added and UAC is off.
legendary
Activity: 1754
Merit: 1007
New version 4.2.1 crashing after 2-3 min. !!!

Please send me the log file that you can access via the toolbar: Tools -> Log File.


PM sent
full member
Activity: 154
Merit: 100
Would you look into adding ahashpool.com as a supported Mining pool?

It is very similar to zpool.ca with autoexchange, but doesn't take the significant cut in the exchange fees.  They fixed the bug in the Yiimp software that I pointed out elsewhere on the forums.   The setup is almost identical to zpool.  Would be very interested in seeing it in the profit switching compared to the other pools.

Using multipoolminer I am seeing an average of $7-8/day on my 1080Ti compared to the $5 that I see using Zpool.

Also it seems that Bitcore, Xevan, Phi, and Hsr would be good algorithms to add since they do offer some decent profit over others at times.
full member
Activity: 558
Merit: 194
Does Awesome Miner support remote controlling miners running nvOC (Ubuntu)?

My farm of nvOC based miners is growing and being able to centrally manage 1bash, 3main and the watchdog scripts (or perhaps in case of the watchdog script) be a replacement for it, would be very nice.

I'm running DSTM ZM Miner 0.5.6 on all rigs.  I know that Awesome Miner recently added support for it, but it is not clear to me if Awesome Miner is only capable of interfacing with the ZM miner's API, or if it can manipulate GPU clock rates, power level, coins mined, etc, which are all normally selected within the 1bash script on each rig.
legendary
Activity: 3346
Merit: 1094
New version 4.2.1 crashing after 2-3 min. !!!

Please send me the log file that you can access via the toolbar: Tools -> Log File.

Have the same Error and send you the link to the log in PM,
looks like it crash when profitswitching, change the pool.

There is a bug in the new Profit Threshold check. If you disable that one for the moment, it should work. I will release a correction for this soon.
full member
Activity: 158
Merit: 100
mine safe o/
One more happy user there  Grin Wink
full member
Activity: 218
Merit: 100
New version 4.2.1 crashing after 2-3 min. !!!

Please send me the log file that you can access via the toolbar: Tools -> Log File.

Have the same Error and send you the link to the log in PM,
looks like it crash when profitswitching, change the pool.
full member
Activity: 173
Merit: 100
patrike,

add please one more column to display the profit, so that the current profit and 24 hour profit are simultaneously visible.
I'm already very tired of constantly going to the settings and switching the time period from the current to 24h and back. I want to always see both results.
In the settings we need to leave it only for the profit switching calculation.

something like this:



Thank you very much in advance!
legendary
Activity: 3346
Merit: 1094
Did AM ever get support for the eBit miners?   
I actually don't know. Awesome Miner supports most miners that runs cgminer or compatible software with a monitoring API. If you have any of these miners, please give it a try with Awesome Miner and let me know.

Hi Patrike,

Here is the API Report for an eBit 9t miner.   It uses CgMiner.   It does not have a configuration option to enable anything API related.

Version: 4.2.1
API command: config

API command: summary

API command: privileged

API command: devs

API command: pools

API command: coin

API command: notify

API command: stats

If this miner is running Cgminer (are you sure?), it has not been enabled for API calls. Do you have any configuration on this miner to enable it? Or any other settings related to Cgminer or maybe even an cgminer.conf file?
legendary
Activity: 3346
Merit: 1094
New version 4.2.1 crashing after 2-3 min. !!!

Please send me the log file that you can access via the toolbar: Tools -> Log File.
legendary
Activity: 3346
Merit: 1094
Did anybody successfully run DSTM miner on 1080ti? It never starts for me, strangest thing ever.
First try what puwaha suggested above, because that's probably the solution.
If it still doesn't work, please use the Diagnostics button in the toolbar to get more details from the mining software why it isn't starting.
legendary
Activity: 1274
Merit: 1000
Did AM ever get support for the eBit miners?    
I actually don't know. Awesome Miner supports most miners that runs cgminer or compatible software with a monitoring API. If you have any of these miners, please give it a try with Awesome Miner and let me know.

Hi Patrike,

Here is the API Report for an eBit 9t miner.   It uses CgMiner.   It does not have a configuration option to enable anything API related.

Version: 4.2.1
API command: config

API command: summary

API command: privileged

API command: devs

API command: pools

API command: coin

API command: notify

API command: stats


dig a little deeper it's there in a few spots you can send API commands if i understand what you asking for right with GPU cards even with external miners ... under tools, i think is were i saw it... or you want a GUI with API links ? .....


Toptek - I'm not sure what you are asking or suggesting.   This is an ASIC machine, a bitcoin miner that I am hoping AwesomeMiner can support so that it can at least be viewed or managed through the GUI.  Patrike asked earlier for someone to post the results of API Report in AwesomeMiner.  

Thanks

Misunderstood my bad my excuse on the internet to much no life or that's what i get for not reading it all .... 
newbie
Activity: 32
Merit: 0
Did AM ever get support for the eBit miners?   
I actually don't know. Awesome Miner supports most miners that runs cgminer or compatible software with a monitoring API. If you have any of these miners, please give it a try with Awesome Miner and let me know.

Hi Patrike,

Here is the API Report for an eBit 9t miner.   It uses CgMiner.   It does not have a configuration option to enable anything API related.

Version: 4.2.1
API command: config

API command: summary

API command: privileged

API command: devs

API command: pools

API command: coin

API command: notify

API command: stats


dig a little deeper it's there in a few spots you can send API commands if i understand what you asking for right with GPU cards even with external miners ... under tools, i think is were i saw it... or you want a GUI with API links ? .....


Toptek - I'm not sure what you are asking or suggesting.   This is an ASIC machine, a bitcoin miner that I am hoping AwesomeMiner can support so that it can at least be viewed or managed through the GUI.  Patrike asked earlier for someone to post the results of API Report in AwesomeMiner.   

Thanks
legendary
Activity: 1274
Merit: 1000
Never hit 7.5 Msol/s before (always check from pool side) but now things change , with DSTM 0.5.6 and awesome miner  4.2.1 above 7+++ for usual and hit 8.5 Msol/s sometimes  Shocked

Merry christmas

yup, DSTM 0.5.6 is nice ..   one rigs I'm building that only has two NV GTX cards a 1070 and 1080 with 1070 Ti due here this week coming some time ..when i was using EWBF's CUDA Zcash miner with the 1070 and 1080 no ti's yet


I was getting 980 h/sol some thing between the two OC, an using DSTM 0.5.6, i went up to 1.05 KH or higher same settings and it runs cooler ...
Jump to: