Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 562. (Read 703113 times)

I'm still kinda confused about this program.

I spent a good few days manually benchmarking each algo for my card, entering dcri values for dual mining etc but after running it for a week it's made the equivalent of £7. I can't actually withdraw £2 of that as it doesn't reach MPH's minimum withdrawl.

Using Nicehash on it's own is still making me a consistent £2 a day, so £14 in a week (single card mining, currently running almost 24/7)

It seems like every time AM switches algos it grossly overestimates the amount I can make, sometimes suggesting £4-£5 and then within five minutes I check and it's down to £0.50-£0.80.

Am I missing something obvious? Even with the recent spike in bitcoin this week I've barely made half what I do with Nicehash alone.

Hi,

Thank you the demo linces, after a day I really thinking about the buy!

I have couple question.

How can I setup the mail smtp with gmail? I tryed in every way but I had no mail notification at all.
When the mail sender is working fine do I will recive email if just the remote agent working? I mean if my main PC with AwesomeMiner is off.


Ballance..
I have a couple coins and some doesent have wallet (or just I dont need), so I mining to the exchange. How can I track those coins ballance?
Example I have Signatum ( I am on dev version) and I mining directly to cryptopia. There is a way to track?

Many Thanks

Thank you.

I just witnessed how a switch from EHT+SIA to ETH+DCR didn't include the correct command line, even using my single profile. I checked the log and found where this happens. Only included the relevant part to see that it came from ETH+SIA (line 4, command at line 57), profitability for DCR got higher and then the switch happens at line 291 (command at line 330).

https://pastebin.com/99jGt4tA

Thank you I sent a pm for you

Hi,

Could the deleted post have been some forum issue? I don't have any permissions to moderate or delete posts from this thread - which is actually a good thing.

Please contact me via PM or e-mail to get a time limited trial license. I need to generate a license based on your e-mail address.

For Ethereum the value is correctly higher on the single profile, as it also includes SIA for dual mining, while it's not for the group profile. I will have to investigate if there is a problem with group profiles not including secondary coins correctly - that's the only scenario I can think of right now. I will get back to you on this.

I had a post reply here, why was deleted?

I just ask , there is any demo linces to try Premium edition before i pay for it?

I switched to another pool (CoinMine.pl) and now Dualmining with Claymore and single coin mining is working again. Looks like there is a problem with Supernova and wallet / workername.

No, calculations seemed correct. The profits for the profile group were much higher than for the single profile (I didn't sum it up though). It was only that the command line didn't include a secondary coin. (see edit)

I left AM working overnight with the sinlge profile and it seems to switch correctly to other coins. I saw some succesful switches to Pascal and Decred.

That was with 3.2.4 and I'm writing this hours after 3.2.5. I'll keep an eye out for this.

EDIT: Nope, issue is still there. Checked what you asked and yes, the profit switching tab value is wrong (only checked ethereum). Everything is on screenshot:

https://i.imgur.com/W0eH3d0.jpg

Maybe AM is ignoring secondary coins on group profiles? Judging by the command line it is also ignoring device profiles (missing -dcri value in group profile command line)

The solo mining issue sounds similar to what was reported by another user above. Have you investigated this from a Claymore miner point of view?

For the second question you need to provide more information. What mining software being used, parameters and so on. You can use the Diagnostics button in Awesome Miner to verify the command line sent to the mining software.

Version 3.2.5 (Development preview of 3.3 - Not for production use)

- More flexible algorithm configuration. New algorithms can be defined by user and configured for each mining software.
- More flexible Online Service and profit switching configuration
- Managed Software can be added and used by both Managed Miners and by the Managed Profit Switcher. Define custom command line arguments for new algorithms per mining software.
- Profit switching improvements, including configuration to disable individual algorithms per pool and separate dual mining hashrates
- Web interface includes secondary hashrate if available, coin information in smart phone mode and corrections to notification display in multi-user environments
- New HTTP API's: Perform operations on a single notification. Includes Group Id information for miners. Get list of Managed Templates and apply templates to a miner.
- Custom e-mail address can be set for a notification action, to override the global e-mail address to send notifications to
- Rule triggers to detect when the computer is idle and used, to support start of mining when the computer is idle
- Execute action can use the variable "[Host]" for the parameters, to launch external applications with the hostname/ip of the miner as a parameter.
- The coins listed with exchange rate in the statusbar can be customized
- Moved e-mail server configuration to a separate section in the Options dialog
- New algorithms and coins added
- Add user defined WhatToMine coins not listed in the main API
- Antminer R1-LTC hashrate correction
- Display Claymore miner invalid shares as HW errors
- Claymore Ethereum Miner 9.8
- Claymore Zcash Miner 12.6
- Ccminer 2.1 replaces older Ccminer SP-mod
- Corrections to SMTP library to support Office 365 accounts
- Correction of Block Explorer request for zcash for the Balance feature
- General improvements and corrections

Important: The Remote Agent must also be upgraded.

Development Previews can be enabled from the Options dialog, General section. Then Menu -> Check for updates. If you need access to the MSI files for manual installation:
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteAgent.msi

Don't downgrade to version 3.2 once you installed the new development versions.

New guide on the web site about Managed Software:
http://www.awesomeminer.com/help/managedsoftware.aspx

Note when upgrading to 3.2.5: User defined Managed Software that was introduced in a previous development release has a new way of defining algorithm support together with command line arguments per algorithm. Settings made in previous development version on which algorithm the User defined Managed Software supports will not be upgraded and needs to be specified again in the new configuration once upgraded to 3.2.5.

- Unable to mine dual with clayore latest 9.8, allways "solo mining ethereum".

 - i have crated Bitcore algo to mine in zpool.ca, but it never shares, the same as skunkhash, miner starts but no shares

No changes for that in Awesome Miner. Maybe in the new Claymore version?

The API isn't enabled. It looks like you start sgminer with your own batch commands (please correct me if I'm wrong here), and that's not really what they are intended for because Awesome Miner will not be able to setup API ports and similar. What if you just take your command line arguments and put them int the command line section, and let Awesome Miner launch sgminer?

Hi,

i can solomine LBRY but i get "LBC: Authorization failed" with new Claymore 9.8. Something changed?

Hello!
API file: https://fex.net/#!172661889546

OK, I will take a look. Did you have any information from the Profit switching tab to share as well? Where the actual calculations incorrect?

I would think just having a ruleset or a rule trigger would be good enough for our scenarios right now and would satisfy much of the needs at the moment.  The remote part I feel would be something you can look into later.

Something weird is happening with the managed profit mining profile groups. I made 1 profile for a GTX 1060 with all my benchmarks and then I made a profile group with 4 of these profiles (I have a rig with 4 identical gtx1060). Using the single profile works fine with Claymore Dual, AM correctly calls Claymore Dual with a secondary coin (well, at least for ETH+SIA, no other coin has been auto switched yet). However if I use the profile group AM calls Claymore Dual with no secondary coin:

https://i.imgur.com/zGkSgL8.jpg

I assume you also see the GPU's perfectly fine in the System tab, which indicates that Awesome Miner can get GPU information without any problems.

On the GPU that it's also required that the mining software reports GPU's with hashrate and more, and that is totally missing here. Could you select the miner with this problem and send me the API report (toolbar: Tools -> API report).