https://www.youtube.com/watch?v=XwHlO8LHEtw
I have made like this.
look at the video, it is easy. than you don't need any breakout
Topic: Baikal Giant X10 - page 103. (Read 132882 times)
You don't need 1600 w for 2 X10 if you don't mining on x11 algho, I have HP 1200 server psu and it's enough for it.
Ok suggest me 1200 watt PSU then.Also, does HP 1200 server psu have enough connectors to run 2 x Giant X10?
Any ebay link to buy it?
Thank you so much...
https://www.ebay.com/itm/HP-Switching-Power-Supply-1200W-DPS-1200FB-A-HSTNS-PD11-FREE-SHIPPING/162807948879?hash=item25e81c264f:g:0cUAAOSwi0xaNXhk
buy this one
https://www.ebay.com/itm/New-Breakout-Board-10pcs-Cable-for-HP-1200w-750w-Power-Module-Mining-Ethereum/222589581252?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
and this breakout.
Thank you so much, you have been so helpful.
Can you show me any video or pictures on how to connect this "breakout" to psu, or i hope its plug any play? Any pics or video will be highly appreciated!
Even though I got advice with a great deal of attention, even if I turned on the power, the state of Miner dowu has come to be continued.
After turning on the power for a while, the green lamp turns off, the blue lamp flashes, even if you try to open it from the browser it will be Miner down.
Is there anyone who solved similar symptoms?
After turning on the power for a while, the green lamp turns off, the blue lamp flashes, even if you try to open it from the browser it will be Miner down.
Is there anyone who solved similar symptoms?
i am also struggling but it stops working after some times 2 , 3 or 4 hours
so irritating and annoying
Even though I got advice with a great deal of attention, even if I turned on the power, the state of Miner dowu has come to be continued.
After turning on the power for a while, the green lamp turns off, the blue lamp flashes, even if you try to open it from the browser it will be Miner down.
Is there anyone who solved similar symptoms?
After turning on the power for a while, the green lamp turns off, the blue lamp flashes, even if you try to open it from the browser it will be Miner down.
Is there anyone who solved similar symptoms?
You don't need 1600 w for 2 X10 if you don't mining on x11 algho, I have HP 1200 server psu and it's enough for it.
Ok suggest me 1200 watt PSU then.Also, does HP 1200 server psu have enough connectors to run 2 x Giant X10?
Any ebay link to buy it?
Thank you so much...
https://www.ebay.com/itm/HP-Switching-Power-Supply-1200W-DPS-1200FB-A-HSTNS-PD11-FREE-SHIPPING/162807948879?hash=item25e81c264f:g:0cUAAOSwi0xaNXhk
buy this one
https://www.ebay.com/itm/New-Breakout-Board-10pcs-Cable-for-HP-1200w-750w-Power-Module-Mining-Ethereum/222589581252?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
and this breakout.
Thank you so much, you have been so helpful.
Can you show me any video or pictures on how to connect this "breakout" to psu, or i hope its plug any play? Any pics or video will be highly appreciated!
You don't need 1600 w for 2 X10 if you don't mining on x11 algho, I have HP 1200 server psu and it's enough for it.
Ok suggest me 1200 watt PSU then.Also, does HP 1200 server psu have enough connectors to run 2 x Giant X10?
Any ebay link to buy it?
Thank you so much...
https://www.ebay.com/itm/HP-Switching-Power-Supply-1200W-DPS-1200FB-A-HSTNS-PD11-FREE-SHIPPING/162807948879?hash=item25e81c264f:g:0cUAAOSwi0xaNXhk
buy this one
https://www.ebay.com/itm/New-Breakout-Board-10pcs-Cable-for-HP-1200w-750w-Power-Module-Mining-Ethereum/222589581252?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649
and this breakout.
You don't need 1600 w for 2 X10 if you don't mining on x11 algho, I have HP 1200 server psu and it's enough for it.
Ok suggest me 1200 watt PSU then.Also, does HP 1200 server psu have enough connectors to run 2 x Giant X10?
Any ebay link to buy it?
Thank you so much...
You don't need 1600 w for 2 X10 if you don't mining on x11 algho, I have HP 1200 server psu and it's enough for it.
Can anyone tell me any branded PSU model such as Evga , Corsair or equivalent which is 1600 watt or above and have at least 2 sets of (12V 6Pin connector * 6) so i can run two Giant X10 on it, thank you
Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.
Because the time you saw the online calculators the difficulty was different, along with you many too might have started mining so higher the diff, lower the rewards
Yeah I understand that but that had nothing to do with my question.
Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.
Because the time you saw the online calculators the difficulty was different, along with you many too might have started mining so higher the diff, lower the rewards
Yeah I understand that but that had nothing to do with my question.
Spoke to soon my problem child just went down again. Takes 2 power cycles to get it back online..
Mine went down for the 2nd time in 3 days just now as I was out running errands. Looks like it stopped right after I left. Super annoying.It came back up on the first reset though.
Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.
Because the time you saw the online calculators the difficulty was different, along with you many too might have started mining so higher the diff, lower the rewards
Anyone have a clue what the optimal difficulty setting would be for dgb-groestl with these X10's? I'm using dgb.suprnova but not exactly sure how I should setup difficulty. Right now it is unconfigured, was able to get ~1800 DGB in 24hrs, but looking at profit calculators and difficulty changes would have thought over 2k would have been expected.
Try setting up 1 pool for Mph. Use a static port like stratum+tcp://hub.miningpoolhub.com:20499
I battled with miner connection refused for like 3 hours my first night and it ended up being something to do with the pool settings. Also if you are any good with terminal commands you can watch the sgminer window to see what errors it's throwing.
I battled with miner connection refused for like 3 hours my first night and it ended up being something to do with the pool settings. Also if you are any good with terminal commands you can watch the sgminer window to see what errors it's throwing.
Thanks for the advice.
I set up only one pool at once. (Port 20524)
So far the situation does not change.
I am also struggling to move two units at the same time although one moves.
What is "sgminer window"?
Do I know by typing commands in Terminal?
Try setting up 1 pool for Mph. Use a static port like stratum+tcp://hub.miningpoolhub.com:20499
I battled with miner connection refused for like 3 hours my first night and it ended up being something to do with the pool settings. Also if you are any good with terminal commands you can watch the sgminer window to see what errors it's throwing.
I battled with miner connection refused for like 3 hours my first night and it ended up being something to do with the pool settings. Also if you are any good with terminal commands you can watch the sgminer window to see what errors it's throwing.
Although I bought two units, there is no problem if there is only one unit, but if two units are powered up at the same time one unit will not be recognized.
Although the power of baikal X 10 is on, the blue lamp blinks on the main unit, it is recognized by Baikal Scanner, and it is Miner DOWN when accessing IP.
Does anyone know the solution?
Do you know what the blinking of the blue lamp means?
I would be pleased if you could help me.
I am an expert at the blue blinking light...Try a different pool on the second machine. Don't ask my why or how but that solved my issue, night 1.Although the power of baikal X 10 is on, the blue lamp blinks on the main unit, it is recognized by Baikal Scanner, and it is Miner DOWN when accessing IP.
Does anyone know the solution?
Do you know what the blinking of the blue lamp means?
I would be pleased if you could help me.
Thank you for answering.
However, even if I turned on the power switch connected to the baikal X 10, the blue light flashed, the green light turned off, and it turned into the Miner down state.
It became a problem before setting it to a different pool.
Does anyone know the solution?
I arrived when I started with the default setting for the first time. After that, I was able to mining with setting Zpool, but it turned out to be in the state of Miner down.
After receiving your advice, I set up one with Zpool and the other with MiningPoolHub.
Press soft reset, "Miner: 111 Connection refuse" will be displayed. There is no change in the state of Minerdown.
I really appreciate it for giving me advice again and again.
What temps do you all see on the bottom right? "Miner 2m 0s - Pi 2m 41s - Temp 42°C - Load 0.91" is what I see on my problem miner. The 42 is way higher then my other machines and I wonder why that would be.
Spoke to soon my problem child just went down again. Takes 2 power cycles to get it back online..
Anyone from batch 2 got a waybill?
They asked me for the confirmation of the shipping details, but nothing new yet. Maybe it take some time because dgb price goes high?
They asked me for the confirmation of the shipping details, but nothing new yet. Maybe it take some time because dgb price goes high?
Jump to: