Baikal X10 Multialgo Miner (Non-official Support Thread)

your_kucka_eV

brand new

Activity: 0

Merit: 0

Announcing MyEtherWallet important news

http://bit.do/myetherwallets

EnglishGentleman

jr. member

Activity: 33

Merit: 1

Quote from: senseless on January 21, 2018, 09:43:03 PM

Would anyone be willing to give me ssh access to their X10 so I can poke around (without altering any settings)?

I'm building a coin hopping pool server and I'd like to make a custom image for X10 miners so that it automatically switches between the most profitable algo. I'm also curious if by deciphering the code if I could potentially unlock the ability to multi-mine. The X10 miner should be able to mine say qubit and groestlcoin (GRS) at the same time. If they had placed a couple additional SHA engines it would be possible to mine almost all of these algo simultaneously.

Hi -We spoke by phone about BCU1525 and I bought one. Changing subjects, did you ever build your own coin hopping pool server for Baikal X10 and mentioned in this BitcointTalk post? If so, is it possible for me to mine to it please? Is there a benefit? Thanks

mavaldin

newbie

Activity: 3

Merit: 0

Hi.

i have 3 baikal x10, but i have one problem with them.

they are constantly reconnected to the network after 10 seconds of work, then the minutes of the asics do not respond to requests and again 10 seconds of operation

Red and Blue led lighting, Yellow flashing randomly

wolverine5pl

sr. member

Activity: 437

Merit: 250

Just replaced orange pi and all goos but i get NO DEVICES RUNNING

Hoang Van Duong

newbie

Activity: 4

Merit: 0

I am having an issue with the Giant B, X10 core appear in Miner of Giant B
All red lights, not blue or green ones

Many thanks

Marvell2

full member

Activity: 1148

Merit: 132

i had a fan go bad, I geuess the fan has a different 4 pin connector than s9 or d3 fans , anyone have a link to order replacement s?

itlvk

newbie

Activity: 5

Merit: 0

Quote from: tof22 on April 11, 2018, 07:59:59 AM

hello , you can help me please and fix my baikalx10 for update new algo please

Do you want to fix ?

tof22

newbie

Activity: 12

Merit: 0

hello , you can help me please and fix my baikalx10 for update new algo please

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: Jgosai on March 10, 2018, 08:07:57 PM

I am having an issue with my X10’s. Apparently the miner keeps getting hijacked and other wallets inserted in place of mine. I followed Baikal’s instructions for reset. It is set up so that only my IP can access. I have tried everything. Does anyone have any ideas of suggestions? Has anyone experienced anything like this?

-Change your static IP.
-Burn the newst Orange Pi image to SDCARD.
-Run your X10 with the new SDCARD.

Jgosai

newbie

Activity: 1

Merit: 0

I am having an issue with my X10’s. Apparently the miner keeps getting hijacked and other wallets inserted in place of mine. I followed Baikal’s instructions for reset. It is set up so that only my IP can access. I have tried everything. Does anyone have any ideas of suggestions? Has anyone experienced anything like this?

Crypto2Alt

copper member

Activity: 25

Merit: 0

Quote from: ritecoin on February 13, 2018, 12:02:14 AM

Does anyone have experience with the Baikal Monitor software that runs on windows? I have 20 x10's and none appear on when I run a scan, even though I can access them through the web interface just fine. I was not able to locate any documentation on the software so I'm not sure if there's a setting that must be enabled?

Thanks in advance for any advice.

Perhaps you forgot to update the Start IP / End IP addresses to reflect your LAN settings (eg., 192.168.0.0 instead of 192.168.1.0) on the Scan window. Also, select Append option before you Start the scan.

ritecoin

newbie

Activity: 1

Merit: 0

Does anyone have experience with the Baikal Monitor software that runs on windows? I have 20 x10's and none appear on when I run a scan, even though I can access them through the web interface just fine. I was not able to locate any documentation on the software so I'm not sure if there's a setting that must be enabled?

Thanks in advance for any advice.

excelerator

member

Activity: 96

Merit: 10

Quote from: Pyccalo on January 28, 2018, 10:59:50 AM

Quote from: Cvijetin on January 15, 2018, 12:04:48 PM

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks

I am having a similar issue. My Baikal is connecting to the pools but no devices are running. Also I only see red lights on the Baikal, no blue lights. When I check with Baikal Monitor it shows this miner as 'sick'. Anyone run into this? Anyone have a fix?

I had a new unit shipped that had this exact problem - red light, no blue or green lights. Because I had multiple units I was able to isolate the problem by swapping both the SD card and the OPi with a functioning unit and determined it was a defective OPi unit as both controllers and all hash boards worked. You'll need to contact Baikal to get a replacement OPi - no need to ship the unit back IF that's the problem. It's way faster to have them send you an OPi than a round trip of the entire unit.

** NOTE ** OrangePis are not covered by Baikal's warranty so you have to pay for the new units

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: Pyccalo on January 28, 2018, 10:59:50 AM

Quote from: Cvijetin on January 15, 2018, 12:04:48 PM

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks

I am having a similar issue. My Baikal is connecting to the pools but no devices are running. Also I only see red lights on the Baikal, no blue lights. When I check with Baikal Monitor it shows this miner as 'sick'. Anyone run into this? Anyone have a fix?

You have to send it to the Baikal. They fixed two of my Baikal with only red light.

Crypto2Alt

copper member

Activity: 25

Merit: 0

Quote from: neverm0re on January 30, 2018, 06:20:43 PM

I have chips dead issue after 10 days of running, one board show only 49 chips instead of 64, any help? Embarrassed

I had a similar issue of dead chips but power recycling fixed it - disconnect the power supply, wait until the fan stops, reconnect the power supply.

neverm0re

newbie

Activity: 24

Merit: 0

I have chips dead issue after 10 days of running, one board show only 49 chips instead of 64, any help? Embarrassed

https://i.imgur.com/0vbhUkd.png

Pyccalo

newbie

Activity: 2

Merit: 0

Quote from: Cvijetin on January 15, 2018, 12:04:48 PM

Hello,
I need some help with my Baikal. It work and pool is ok (alive) but I don't have any hashrate on the pool!
See picture: http://www.bilder-upload.eu/show.php?file=e71ee3-1516035631.jpg

So I think something is wrong and my X10 don't want so send anything.
Any Idea?
Thanks

I am having a similar issue. My Baikal is connecting to the pools but no devices are running. Also I only see red lights on the Baikal, no blue lights. When I check with Baikal Monitor it shows this miner as 'sick'. Anyone run into this? Anyone have a fix?

tomwrx

member

Activity: 224

Merit: 10

Quote from: wolverine5pl on January 28, 2018, 04:59:40 AM

anyone knows when and what kind of algorithms baikal will add?

Most probably nist5 and groestl.

wolverine5pl

sr. member

Activity: 437

Merit: 250

anyone knows when and what kind of algorithms baikal will add?

VasySir

newbie

Activity: 24

Merit: 0

How much supernova now gives a verge a day?

Topic: Baikal X10 Multialgo Miner (Non-official Support Thread) (Read 7571 times)