Baikal X10 Multialgo Miner (Non-official Support Thread) - page 4.

denax

newbie

Activity: 46

Merit: 0

Quote from: bitcoinexplorer on December 27, 2017, 02:57:54 PM

Here you go, it lookslike a stable pool, i know the owner he is honest and not cheater like idcray
http://s2.altcoinix.com/xvg/public/

Cool

lets mine XVG

Looks like a stable Pool? Its up for not even 1h. Probably your own pool or of one of your friends. There is nothing wrong with opeing own pool, but not to say it and to act like its already an esablished pool and call it "stable" after not even 1h uptime is shady to me. No thanks.

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Here you go, it lookslike a stable pool, i know the owner he is honest and not cheater like idcray
http://s2.altcoinix.com/xvg/public/

Cool

lets mine XVG

denax

newbie

Activity: 46

Merit: 0

Quote from: bitcoinexplorer on December 27, 2017, 01:55:07 PM

Finally found XVG-Myriad pool, this one i know is a honest pool operator and not cheater like idcray.
Hope it works fine. Cool

will let you know guys after test completes.

Name?

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Finally found XVG-Myriad pool, this one i know is a honest pool operator and not cheater like idcray.
Hope it works fine. Cool

will let you know guys after test completes.

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Any good pool of Verge Myriad Groestl?

Because the pool http://xvg-mg.idcray.com which previously lost some coins and denied to pay some of my coins which it lost just paying 500 coins for 24 hours where in it should be
769 coins.
http://whattomine.com/coins/218-xvg-myriad-groestl?utf8=%E2%9C%93&hr=10000&p=450.0&fee=0.0&cost=0.1&hcost=0.0&commit=Calculate

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

I am a big fan of Baikal but the support is getting very slow, which i did not expected from Baikal.

Trying reinstall of software does not bring any change.

I hope they reply soon because every day i am loosing several hours of mining and BTC revenues.

It clearly seems like a Ethernet port or Orange pi issue, i hope they reply soon because it is really annoying to keep baby sitting a miner which is supposed to work 24/7 without interruptions.

denax

newbie

Activity: 46

Merit: 0

Since idcray is down, which Pool do you guys recommend for digibyte? MiningPoolHub, BlacksFactory, or suprnova? (and maybe: why do you recommend that pool and not the others?)

tomwrx

member

Activity: 224

Merit: 10

Quote from: crytotronik on December 21, 2017, 12:00:44 PM

Quote from: denax on December 21, 2017, 07:55:03 AM

Quote from: slanislaw on December 20, 2017, 12:03:07 AM

Quote from: denax on December 19, 2017, 02:22:36 PM

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

I guess "different" should be "difficulty". I mined with VarDiff on idcray and the assigned diff was around 30-70. So the port for diff=50 should be fine. Maybe they added the 50 for Baikal X10 owners. All you have to do is to use port 10064 for a fixed difficulty at 50.

but isn't better to mine on 10063 port with var diff and let pool set a diff for your miner?

denax

newbie

Activity: 46

Merit: 0

Quote from: crytotronik on December 21, 2017, 12:00:44 PM

Quote from: denax on December 21, 2017, 07:55:03 AM

Quote from: slanislaw on December 20, 2017, 12:03:07 AM

Quote from: denax on December 19, 2017, 02:22:36 PM

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

I guess "different" should be "difficulty". I mined with VarDiff on idcray and the assigned diff was around 30-70. So the port for diff=50 should be fine. Maybe they added the 50 for Baikal X10 owners. All you have to do is to use port 10064 for a fixed difficulty at 50.

Okay did that but now my hashrate on idcray is around 6GH/s, even tho on my miner it still shows me 10GH/s. Is this right?

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: Jluyt123 on December 21, 2017, 12:25:26 PM

I want to double-check, what site did you guys order from, baikalminer.com?

That's correct !

Jluyt123

newbie

Activity: 22

Merit: 0

I want to double-check, what site did you guys order from, baikalminer.com?

VasySir

newbie

Activity: 24

Merit: 0

Verge how many times a day brings?

crytotronik

member

Activity: 147

Merit: 10

Quote from: denax on December 21, 2017, 07:55:03 AM

Quote from: slanislaw on December 20, 2017, 12:03:07 AM

Quote from: denax on December 19, 2017, 02:22:36 PM

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

I guess "different" should be "difficulty". I mined with VarDiff on idcray and the assigned diff was around 30-70. So the port for diff=50 should be fine. Maybe they added the 50 for Baikal X10 owners. All you have to do is to use port 10064 for a fixed difficulty at 50.

mano237

member

Activity: 168

Merit: 10

Quote from: denax on December 21, 2017, 07:55:03 AM

Quote from: slanislaw on December 20, 2017, 12:03:07 AM

Quote from: denax on December 19, 2017, 02:22:36 PM

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

Because many switched over to mine Verge coin>more miner>higher hashrate>higher diff>less profit for all.

denax

newbie

Activity: 46

Merit: 0

Quote from: slanislaw on December 20, 2017, 12:03:07 AM

Quote from: denax on December 19, 2017, 02:22:36 PM

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

Thanks alot. That helped!

Anyways, I got one more problem now:
I started to mine Verge 2 days ago on idcray. Yesterday when I looked in "Earnings" the last 24h I made over 1110 XVG but today its only 800. That is over 25% less. Do you know why that is? Also: Do I have to set the difficulty on my Baikal or some other properties or settings? All I did was pointing it at the pool adresse and put in my username.
And what does the idcray site mean by "mining different was changed for X10 ,plz check your miner."?

Thanks for helping!

slanislaw

member

Activity: 107

Merit: 11

Quote from: denax on December 19, 2017, 02:22:36 PM

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

You are mining on Mining Pool Hub's Auto-switching Groestl port.

Port 17005 is their auto-switching Groestl port. It automatically switches to mine the most profitable groestl coin.

Mine to port 20499 to only mine DGB-Groestl.

cashen

sr. member

Activity: 434

Merit: 251

I have 10 X10s

A couple issues i'm working through.

- Hash rate of miner is much less pool side
- Getting a "Miner down" error. It appears it is connected, but the miner is not started
- Boards sometimes stop working
- The units not currently working I'm getting a "Miner: 111 Connection Refused" error when I try to remotely reboot it.

denax

newbie

Activity: 46

Merit: 0

Received my miner today. So far (over 8h running) it made around 400 DGB, which is alot less than I expected or whattomine says.
I'm mining on Mining Pool Hub, since it was easy to setup und I'm pretty new to mining in general.
Am I doing something wrong? Do I have to do special settings except to point my miner on the pool? Like do I have to set the difficulty or something like that? And if so, how exactly do I do that?
Also sometimes my Dashboard on MPH shows that my hashrate is down to like 8GH/s or 5GH/s or once even 1GH/s but in the settings of the Miner it was constantly on over 10GH/s and I dont have auto switching activated so it cannot switch to other coins.. Why is that?

EDIT:
I just saw that sometimes when the hashrate on Digibyte-Groestl goes down I get hashrate on Myriadcoin-Groestl even tho I didnt allow my miner/worker to mine that coin. Why is that? Did anyone ever have a similar problem on Mining Pool Hub?

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: Fran78 on December 17, 2017, 04:43:24 PM

Thanks!

What i did: i first formatted the SD card with SD formatter. Then used diskpart to clean it intirely, using this tutorial https://www.[Suspicious link removed]s/www.windowscentral.com/how-clean-and-format-storage-drive-using-diskpart-windows-10%3famp

After that i could write the X10 file to the SD card succesfully. Put it in one of the baikals.....and tadaaaaa!! It's working again! Cheesy

Thanks for your help. Tomorrow i will do the same with the rest of the baikals and give an update when they are all on air.

You are welcome.

Quote from: maleemk on December 17, 2017, 04:50:11 PM

I am getting my x10 miners pretty soon. I want to know that is daisy Chain 2-3 these miners in possible or not. Right now I have Daisy Chained my Baikal X2 miners in 3 each and they are working like a charm.

it s not possible.

Quote from: tomwrx on December 18, 2017, 04:54:25 AM

great! when you formated sd card, which file allocation system did you use? fat32, ntfs or some other?

I prefer fat32

Fran78

newbie

Activity: 16

Merit: 0

Quote from: tomwrx on December 18, 2017, 04:54:25 AM

great! when you formated sd card, which file allocation system did you use? fat32, ntfs or some other?

NTFS. If you click the link in my previous post, you can see. Some of the defect cards i could directly
clean with diskpart, but some of them gave an error. These cards i first formatted with SD formatter,
and after that i could run diskpart without any error. I just formatted all the defect cards with succes.
Now installing the X10 file on the cards.

1 of the X10's is finally running perfectly now! Cheesy

The others i will know in a few hours. Hope to have them all up
and running by then.

Topic: Baikal X10 Multialgo Miner (Non-official Support Thread) - page 4. (Read 7573 times)