We re online again all issues fixed
http://s2.altcoinix.com/xvg/public/
you need register
Topic: Baikal X10 Multialgo Miner (Non-official Support Thread) - page 3. (Read 7573 times)
Igo i noticed you have two "sick" miner as well shown on baikal monitor because of the lower hashrate.
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.
Any idea if this can be fixed or need to get replaced by baikal?
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.
Any idea if this can be fixed or need to get replaced by baikal?
You have to send it to Baikal.
Igo i noticed you have two "sick" miner as well shown on baikal monitor because of the lower hashrate.
One of my devices hashboard, BKLU ID:0 has only total 48 out of the 64 chips active, therefore also shown as "sick" because the total hashrate is only ~9.3 GH/s.
Any idea if this can be fixed or need to get replaced by baikal?
To all who have Problems with their Baikal X10:
I got one x10 from Batch2 a week ago and had severe problems with the miner. Allways got the error "Miner 111 Connection refused". Tried everything, different pools, configs, updated the Software several times,... no use. Baikal support not responding till now.
A few ours ago they uploaded a new software for the x10 on their site.
See: https://www.baikalminer.com/support04.php
Direkt Link: https://drive.google.com/drive/folders/1Guf6L8Zd6IXcmPHKxA_oTHo6p1QJovtU?usp=sharing
Download, Update, Everything works fine for me since a few hours... new record for my x10!
I got one x10 from Batch2 a week ago and had severe problems with the miner. Allways got the error "Miner 111 Connection refused". Tried everything, different pools, configs, updated the Software several times,... no use. Baikal support not responding till now.
A few ours ago they uploaded a new software for the x10 on their site.
See: https://www.baikalminer.com/support04.php
Direkt Link: https://drive.google.com/drive/folders/1Guf6L8Zd6IXcmPHKxA_oTHo6p1QJovtU?usp=sharing
Download, Update, Everything works fine for me since a few hours... new record for my x10!
is there any new algo in this update ?
To all who have Problems with their Baikal X10:
I got one x10 from Batch2 a week ago and had severe problems with the miner. Allways got the error "Miner 111 Connection refused". Tried everything, different pools, configs, updated the Software several times,... no use. Baikal support not responding till now.
A few ours ago they uploaded a new software for the x10 on their site.
See: https://www.baikalminer.com/support04.php
Direkt Link: https://drive.google.com/drive/folders/1Guf6L8Zd6IXcmPHKxA_oTHo6p1QJovtU?usp=sharing
Download, Update, Everything works fine for me since a few hours... new record for my x10!
I got one x10 from Batch2 a week ago and had severe problems with the miner. Allways got the error "Miner 111 Connection refused". Tried everything, different pools, configs, updated the Software several times,... no use. Baikal support not responding till now.
A few ours ago they uploaded a new software for the x10 on their site.
See: https://www.baikalminer.com/support04.php
Direkt Link: https://drive.google.com/drive/folders/1Guf6L8Zd6IXcmPHKxA_oTHo6p1QJovtU?usp=sharing
Download, Update, Everything works fine for me since a few hours... new record for my x10!
Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?
Restart your miner.
Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?
Restart your miner.
Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?
Restart your miner.
if you interested to rent me your miner via mining rig rentals with the price that satisfy you , pm me.
Hi. I have problem with baikal interface. Miner works well and I see my hashrate on pool but baikal interface dont work. What to do?
https://xvg-mg.suprnova.cc for myriad-groestl
That is great, so good to see a reputable pool launching in XVG. 
https://xvg-mg.suprnova.cc for myriad-groestl
I have 10 X10s
A couple issues i'm working through.
- Hash rate of miner is much less pool side
- Getting a "Miner down" error. It appears it is connected, but the miner is not started
- Boards sometimes stop working
- The units not currently working I'm getting a "Miner: 111 Connection Refused" error when I try to remotely reboot it.
https://i.imgur.com/JOTNnJr.png
https://i.imgur.com/Q8kJ0i3.png
https://i.imgur.com/BrcG55K.png
A couple issues i'm working through.
- Hash rate of miner is much less pool side
- Getting a "Miner down" error. It appears it is connected, but the miner is not started
- Boards sometimes stop working
- The units not currently working I'm getting a "Miner: 111 Connection Refused" error when I try to remotely reboot it.
https://i.imgur.com/JOTNnJr.png
https://i.imgur.com/Q8kJ0i3.png
https://i.imgur.com/BrcG55K.png
Have you had any luck with zpool? I haven't been able to get it working either. I'm currently on miningpoolhub.
Good effort, but i personally prefer MPOS based pools as it gives idea of how much coins i am going to get 
Hi. Does anyone know how to set up baikal interface to mine XVG on idcray? I mean stratum server and what to write on user and password. Thanks
Its simpleclick "Help--> Getting Started"
you will find stratum servers
And under "Workers" you can create the username and password.
Hope it helps
Hi. Does anyone know how to set up baikal interface to mine XVG on idcray? I mean stratum server and what to write on user and password. Thanks
BLINKING BLUE LIGHT FIX
I may have just stumbled on a fix for the blinking blue light issue. I haven't had a problem with it until last night. I restored one of my miners' settings from a backup and forgot to change the username under the pool configs, so two of my machines were hashing on the same pool with the same username. Got the blinking blue light. Reset the machines to have different usernames and everything has been working fine. This was mining on idcray-xvg pool, haven't observed the issue with other pools.
Hope this helps someone!
-Iron
Tips:
LTC - LMP2zZQpgcb3HQk364vjSAgC1po5yYFQ2G
Update: just tried switching to MPH and got blinking blue on every machine. Checked the "Extranonce" box and did a power cycle, and so far, so good. Will post again if I continue to get errors on MPH.
I may have just stumbled on a fix for the blinking blue light issue. I haven't had a problem with it until last night. I restored one of my miners' settings from a backup and forgot to change the username under the pool configs, so two of my machines were hashing on the same pool with the same username. Got the blinking blue light. Reset the machines to have different usernames and everything has been working fine. This was mining on idcray-xvg pool, haven't observed the issue with other pools.
Hope this helps someone!
-Iron
Tips:
LTC - LMP2zZQpgcb3HQk364vjSAgC1po5yYFQ2G
Update: just tried switching to MPH and got blinking blue on every machine. Checked the "Extranonce" box and did a power cycle, and so far, so good. Will post again if I continue to get errors on MPH.
Hello Everyone,
I've received my niner yestersay and been fighting with it since then.
I performed the SD card erase and the uploaded the software.
Inserted the card, started the miner, and then everything was working fine until I've started to update the pools (Nicehash). Then the miner went offline and gave me this error 111.
Anyone has an idea?
Performed multiple resets by turning off miner with no help....
Thanks guys.
I've received my niner yestersay and been fighting with it since then.
I performed the SD card erase and the uploaded the software.
Inserted the card, started the miner, and then everything was working fine until I've started to update the pools (Nicehash). Then the miner went offline and gave me this error 111.
Anyone has an idea?
Performed multiple resets by turning off miner with no help....
Thanks guys.
Here you go, it lookslike a stable pool, i know the owner he is honest and not cheater like idcray
http://s2.altcoinix.com/xvg/public/
lets mine XVG
http://s2.altcoinix.com/xvg/public/
lets mine XVGLooks like a stable Pool? Its up for not even 1h. Probably your own pool or of one of your friends. There is nothing wrong with opeing own pool, but not to say it and to act like its already an esablished pool and call it "stable" after not even 1h uptime is shady to me. No thanks.
He setup because i told him idcray cheater and community needs a stable honest pool.
Its upto you to use or not
but definitely worth a try
Jump to: