Baikal X10 Multialgo Miner (Non-official Support Thread) - page 7.

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: percy_tc on November 28, 2017, 05:45:44 AM

Have anyone tried to swap Giant+ and X10 (and vice-versa) software on SD card?

I did it. No device running error code.
So it doesnt work.

Quote from: Steven3iii on November 28, 2017, 07:30:41 AM

I think these guys may actually be from Baikal. There. I said it out loud. Grin

ç

I m not the part of the Baikal Team. I live in Turkey.
I m a Baikal customer and trying to help the community for free.

Quote from: tonnynguyen on November 28, 2017, 09:04:32 AM

@Igotek : You answered a lot of questions in my heart. Thanks very much . I am waiting 30 baikal X10 from seller Vietnam. They said they would send it to us from 10th November, but then it was delay to 9th December, I was very sad.

I hope you will receive your miners soon. If you have any questiions, feel free to ask. I m here to help.

tonnynguyen

hero member

Activity: 658

Merit: 500

@Igotek : You answered a lot of questions in my heart. Thanks very much . I am waiting 30 baikal X10 from seller Vietnam. They said they would send it to us from 10th November, but then it was delay to 9th December, I was very sad.

craigh

member

Activity: 159

Merit: 10

Quote from: Steven3iii on November 28, 2017, 07:30:41 AM

I think these guys may actually be from Baikal. There. I said it out loud. Grin

ç

Not sure how I prove I'm not? Huh

Maybe I just got lucky! This is my first foray into mining. I did consider buying a D3, but I'm glad I didn't as X11 isn't very profitable now.

I'll post profitability results after my first full 24 hours of mining (I spent some time playing with trying to set-up solo mining as a learning exercise, but failed!).

C.

Steven3iii

full member

Activity: 238

Merit: 100

I think these guys may actually be from Baikal. There. I said it out loud. Grin

ç

percy_tc

full member

Activity: 584

Merit: 106

Have anyone tried to swap Giant+ and X10 (and vice-versa) software on SD card?

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: Dlikrot on November 27, 2017, 05:33:46 PM

If someone got x13 working on these it would be amazing.... It’s probably left out on purpose

X13 algorithm will not work on Baikal X13.

Quote from: n00bsaibot on November 27, 2017, 07:47:57 PM

When will this units be available for purchase again?

There is no any announcement about it. I m looking forward to getting new miners on the next batch.
Baikal X10 is the best miner that I have ever seen.

GunsN

full member

Activity: 262

Merit: 100

Quote from: n00bsaibot on November 27, 2017, 07:47:57 PM

When will this units be available for purchase again?

nobody knows about it

n00bsaibot

member

Activity: 98

Merit: 10

When will this units be available for purchase again?

craigh

member

Activity: 159

Merit: 10

Quote from: miropp on November 27, 2017, 07:03:59 PM

I have the same question about your payment date, you did not answered it.
Most of customer did not received any miner, you and some people yes and I do not understand why.

Quote from: igotek on November 26, 2017, 10:18:35 AM

Quote from: charles2k on November 26, 2017, 10:03:23 AM

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.

i paid on 13th September. Payment confirmation email 15th September. Waybill email on 22nd November. Delivered to UK on 25th November.

My order was for 1 x Baikal Giant X10 directly from Baikal for $1188 via wire transfer.

miropp

full member

Activity: 810

Merit: 101

I have the same question about your payment date, you did not answered it.
Most of customer did not received any miner, you and some people yes and I do not understand why.

Quote from: igotek on November 26, 2017, 10:18:35 AM

Quote from: charles2k on November 26, 2017, 10:03:23 AM

When exactly did you order and pay?
My friend paid 13th September in BTC a still has no shipping details, I paid 15th September ans also nothing...

Did you pay to Baikal directly or asicminermarket ?
I paid the first day to directly Baikal. I also paid the shipping fee immediately when they request it.
I think there is some problems on the customs. You should receive the miner soon.

Dlikrot

full member

Activity: 230

Merit: 101

If someone got x13 working on these it would be amazing.... It’s probably left out on purpose

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: tomwrx on November 27, 2017, 03:53:08 PM

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

Check this link

I use the same break out board for the PSU.
I have 2400 Watt Paltinum PSU and it can be connected to two breakout board.
Each breakout board has 9 X 6 PIN power connector.
I have total 8 X 6 PIN power cables on a PSU.
Just calculate your power needs then connect it.
Be careful whlie connecting multiple X10 to a PSU.

Quote from: mano237 on November 27, 2017, 04:19:41 PM

Hello!
I can call myself a happy one because I also got mine today & already tried out nicehash quark and dgb myr griestl.

But what I am thinking about is mining poolhub. Its possible there to mine every algo on miningpoolhub which the X10 supports if I am right.
So it would be a great choice to go with miningpoolhub because the miner switches to the coin which is the profitablest one atm. (I read something about that, thats right?) Furthermore I can auto exchange it to any coin I want.
Is there any disadvantage with miningpoolhub?
Somebody alrdy tested ?

I have never trid miningpoolhub with X10. But I have used their pool with Cube and mini miners Baikal.
It was good. Not bad.

The profitable coin mining is possible for Quark, Qubit, and X11 with Nicehash.
Myriad groestl with zpool
Skein with zpool
I dont like zpool. it give less coin than the other pools.

DGB Myriad-Gorestl: https://dgb-groestl.theblocksfactory.com
VERGE Myriad-Groestl: http://xvg-mg.idcray.com/

I use these two pools which are the best pools now for Baikal X10.
There are different pools around. Just try them and post your results here.

mano237

member

Activity: 168

Merit: 10

Hello!
I can call myself a happy one because I also got mine today & already tried out nicehash quark and dgb myr griestl.

But what I am thinking about is mining poolhub. Its possible there to mine every algo on miningpoolhub which the X10 supports if I am right.
So it would be a great choice to go with miningpoolhub because the miner switches to the coin which is the profitablest one atm. (I read something about that, thats right?) Furthermore I can auto exchange it to any coin I want.
Is there any disadvantage with miningpoolhub?
Somebody alrdy tested ?

tomwrx

member

Activity: 224

Merit: 10

igotek, are you using these adapters with your hp psu https://www.ebay.com/itm/DPS-1200FB-800GB-Power-Supply-Breakout-Board-Adapter-Fur-Ethereum-Mining-/222593665370?hash=item33d39dc95a ?

i see only 9 pci-e slots in it. How can you connect two x10 to one psu, when one x10 needs 6 pci-e slots?

craigh

member

Activity: 159

Merit: 10

Quote from: RfBTC on November 27, 2017, 09:06:08 AM

Hello

Baikal X10, at 10 GH/s Quark mines 0,004 BTC / day (around 40$/day) with only 180w ? thats true ? could you upload screenshot with Wattage comsuption & mined amount ? thanks

P.D. Past week the profit was around 60$ / day , now its 40$ / day

Quark runs at 360W according to the specification: https://pbs.twimg.com/media/DNYbXcfV4AA2LO7.jpg:large

I'm going to test real-world wattage when my electricity monitor arrives later this week.

I think Quark is more like $35 a day profit after electricity costs. Still too early for me to tell for sure!

C.

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: ZenoDiac on November 27, 2017, 07:05:46 AM

Hi Igotek

Thanks for your post and the pictures. Very nice!
Could you confirm if these direct Baikal banking details are correct? Because this is what they sent me:

"USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001."

I have some trust issue sending money off to a beneficiary in the Marshall Islands...
THanks in advance

USD account number: 451-906-071-4
Beneficiary: VITCORE HOLDINGS LIMITED
Ajeltake Road, Ajeltake Island, Majuro
Tel: 692 247 3018
Fax: 692 247 3017
Bank Details:
Bank Name: United Overseas Bank Limited
Branch Name: UOB Main
Branch Address: 80 Raffles Place UOB Plaza
1 Singapore 048624
Bank Code: 7375
Swift Code: UOVBSGSG
Branch Code: 001

This is their bank account.
I paid to this bank account.
Trust Baikal, they ship the miners.

Quote from: craigh on November 27, 2017, 08:04:06 AM

Hey

Got my X10 and running well on zpool. I have been playing with solo mining directly to a local wallet, but I can't get it to work. Has anyone managed to achieve solo mining? I know it may be less profitable, but I want to be able to mine new coins that aren't in pools.

Thanks

C.

The solo mining with ASIC is not possible at the moment.
If anyone find it, it will be perfect.

Quote from: GunsN on November 27, 2017, 07:30:21 AM

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

Please be sure you connect one miner to this PSU and set the pools. (Dont set any X11 pools.)
Then do the same for the second miner.
All done !
You can connect two Baikal X10 to HP 1200 Watt.
And one miner is enough for two Baikal X10.

If you want to mine X11 coins, only use one PSU to one miner.

Quote from: Shorty2520 on November 27, 2017, 08:34:25 AM

First of all great post igotek!

I have a question that baikal can‘t answer (misunderstanding in the meaning).

1.
Are the miners updated when they arrive? (I have 2nd batch)
If not .. what is the official source?

2.
And does the orange pi need a extra SD-Card, or is it included?

Can you please tell igotek? Thanks

1. It s not clear now. They didnt announce the time of the other two algorithms yet.
2. Yes, there is an Orange Pi Zero with a SDCARD on each miner.

Quote from: RfBTC on November 27, 2017, 09:06:08 AM

Hello

Baikal X10, at 10 GH/s Quark mines 0,004 BTC / day (around 40$/day) with only 180w ? thats true ? could you upload screenshot with Wattage comsuption & mined amount ? thanks

P.D. Past week the profit was around 60$ / day , now its 40$ / day

Quark algorithm needs 360 Watt for 10 GH/s. Tested with wattmeter.
I have only tested and checked all algorithms and voltage and fan loud.
The profit is good. For Quark algo, Nicehash gives the best profit.
The daily profit is around 40 USD now.

RfBTC

member

Activity: 68

Merit: 10

Hello

Baikal X10, at 10 GH/s Quark mines 0,004 BTC / day (around 40$/day) with only 180w ? thats true ? could you upload screenshot with Wattage comsuption & mined amount ? thanks

P.D. Past week the profit was around 60$ / day , now its 40$ / day

jb7032

full member

Activity: 182

Merit: 100

Quote from: GunsN on November 27, 2017, 07:30:21 AM

Quote from: igotek on November 26, 2017, 01:51:57 PM

Quote from: bigal82 on November 26, 2017, 01:06:47 PM

hey igotek,
which kind of PSUs are you using?

alex

2.5 mm2 3500 Watt 220 volt Power cable.
%94 efficiency Platinum Quality 2400 Watt PSU. (it is so good.)
16AVG 6PIN cables.

If you dont use X11 algorithm, you can connect up to 5 Baikal X10 miner.
When you have received your miner, connect it to the PSU and delete all of the default pools.
Then you can connect up to 5 miners on a PSU.
I will never use X11, so it is ok for me.

@jb7032
@GunsN

When you get your miners, you will be ready for mining.

I will receive miners (2) tomorrow or after tomorrow, I have 2X HP 1200w power supply, is it ok?
thanks

For sure, Depending on which algo you are mining you could easily power both units off of a single 1200w server psu. Assuming you won't be mining X11 the most they will pull is 390w according to the website. In a million years when they ship mine I will do at least 2 of my 3 from a single 1200w hp unit.

Shorty2520

member

Activity: 165

Merit: 11

First of all great post igotek!

I have a question that baikal can‘t answer (misunderstanding in the meaning).

1.
Are the miners updated when they arrive? (I have 2nd batch)
If not .. what is the official source?

2.
And does the orange pi need a extra SD-Card, or is it included?

Can you please tell igotek? Thanks

craigh

member

Activity: 159

Merit: 10

Hey

Got my X10 and running well on zpool. I have been playing with solo mining directly to a local wallet, but I can't get it to work. Has anyone managed to achieve solo mining? I know it may be less profitable, but I want to be able to mine new coins that aren't in pools.

Thanks

C.

Topic: Baikal X10 Multialgo Miner (Non-official Support Thread) - page 7. (Read 7573 times)