Pages:
Author

Topic: [banned mixer] - Premium Bitcoin Mixer | Launched in 2018 🛡️ - page 2. (Read 25047 times)

hero member
Activity: 1540
Merit: 744
See, this is why I thought it's better to ask cygan Smiley
Well, he's the boss, I'm merely dropping my two cents  Grin
legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
to get the private key it is sufficient to remove the hologram with e.g. a carpet knife or another sharp and pointed object. only the part around the hologram will be 'destroyed'. between the holo and the pk (as qr-code) there is a piece of paper to provide further protection

Ohhh, okay, okay! Thank you cygan! I am glad I did not insist on trying to un-stick the laminated part Smiley

the card is laminated on both sides
If the glue is too strong I'd use a hairdryer or heatgun to gently melt the glue and remove it. It should work

See, this is why I thought it's better to ask cygan Smiley
legendary
Activity: 3122
Merit: 7618
Cashback 15%

What I noticed though is the fact that the card is protected with a transparent plastic which is supposed to be removed (at least, in case the owner wants to have access to the private key). But the protection seems impossible to be removed. I am afraid that if I'll try to scratch it with my fingernail or something sharp I may damage the card. Any idea about how to remove that transparent protection? (Perhaps cygan knows more about this technicality?)

the card is laminated on both sides and to get the private key it is sufficient to remove the hologram with e.g. a carpet knife or another sharp and pointed object. only the part around the hologram will be 'destroyed'. between the holo and the pk (as qr-code) there is a piece of paper to provide further protection

btw i'm glad you like the card and that it arrived without any problems Smiley
legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
Is it like a plastic film similar to the ones new screens have?

Yes, it's like a plastic film... It's not very visible in my pictures but it can be seen better in the picture posted above by MoparMiningLLC:



If the glue is too strong I'd use a hairdryer or heatgun to gently melt the glue and remove it. It should work, but don't use it on very high heat or too close as you run the risk of burning the plastic instead.

That seems like a good suggestion and I thank you for it, but I'd rather wait for MixTum's or cygan's input on this, as I'd really not want to damage the card Smiley
hero member
Activity: 1540
Merit: 744
The cards are definitely a success! I just received today "my card" and it looks incredible! It's so shiny that it was actually difficult to take a proper photo, as so much light was reflected by the card!

MixTum, if you want, you can add now the 0.001 BTC on this card, as it arrived at destination.

I said "my card" between quotation marks because, in fact, it is DYING_S0UL's card Smiley He won it at your third raffle but he was very nice and allowed me to have his prize, due to crypto ban from his country. He did not want to risk having the card confiscated (or face other unpleasant situations) and allowed me to receive the card instead. Thank you DYING_S0UL for your generosity! And thank you MixTum for these raffles!
~Snipped~
What I noticed though is the fact that the card is protected with a transparent plastic which is supposed to be removed (at least, in case the owner wants to have access to the private key). But the protection seems impossible to be removed. I am afraid that if I'll try to scratch it with my fingernail or something sharp I may damage the card. Any idea about how to remove that transparent protection? (Perhaps cygan knows more about this technicality?)
It does look good indeed. Is it like a plastic film similar to the ones new screens have? If the glue is too strong I'd use a hairdryer or heatgun to gently melt the glue and remove it. It should work, but don't use it on very high heat or too close as you run the risk of burning the plastic instead and possibly wrap the card as well.
legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
It seems our cards are a success!  Smiley

The cards are definitely a success! I just received today "my card" and it looks incredible! It's so shiny that it was actually difficult to take a proper photo, as so much light was reflected by the card!

MixTum, if you want, you can add now the 0.001 BTC on this card, as it arrived at destination.

I said "my card" between quotation marks because, in fact, it is DYING_S0UL's card Smiley He won it at your third raffle but he was very nice and allowed me to have his prize, due to crypto ban from his country. He did not want to risk having the card confiscated (or face other unpleasant situations) and allowed me to receive the card instead. Thank you DYING_S0UL for your generosity! And thank you MixTum for these raffles!

Here are some pictures:



What I noticed though is the fact that the card is protected with a transparent plastic which is supposed to be removed (at least, in case the owner wants to have access to the private key). But the protection seems impossible to be removed. I am afraid that if I'll try to scratch it with my fingernail or something sharp I may damage the card. Any idea about how to remove that transparent protection? (Perhaps cygan knows more about this technicality?)
legendary
Activity: 3248
Merit: 3098
It seems our cards are a success!  Smiley


It looks like an interesting collector's item.

Two questions, you don't have any direct contact other than via email, telegram or any other chat?
What is happening with the Telegram bot, the link is on the site. There is no response.
full member
Activity: 157
Merit: 170
Premium Bitcoin Mixer
It seems our cards are a success!  Smiley

Received my card today! Thank you @[banned mixer]


hero member
Activity: 504
Merit: 816
Top Crypto Casino
This time all spots were occupied in only 13 minutes! I guess it's a new record.

The winner was announced also in a quite short time.

Congratulations! We have a winner!

Quote
4 - tweetious

00000000000000000001c6b1dc3db3f46858c5c1fb8710235437dcc91ed6f8e4
legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
This time all spots were occupied in only 13 minutes! I guess it's a new record.
As usual, I was having my beauty sleep at that moment so I missed the raffle Again.
legendary
Activity: 1456
Merit: 5874
light_warrior ... 🕯️
Friends, hurry up! MixTum has published a new competition! ([Free Raffle] Exclusive MixTum collectible card №6).  Wink
hero member
Activity: 504
Merit: 816
Top Crypto Casino
And this reason was not also applied to other mentioned translation, some of which has even more letters in their names. For example, "Indonesian" as a word is longer than "Romanian", and "Russian" only 1 character shorter than "Romanian", but those names wasn't shortened.
I believe this is because some other words are much more difficult to shorten (more precisely, in their shortened form they may not convey the underlying meaning).

You have a point on this matter, now I also see that Portuguese translation was also shortened to "Portug". However, I find it not so common as, for example, "rus" which is shortened for Russian and is familiar almost to everyone.
legendary
Activity: 1456
Merit: 5874
light_warrior ... 🕯️
And this reason was not also applied to other mentioned translation, some of which has even more letters in their names. For example, "Indonesian" as a word is longer than "Romanian", and "Russian" only 1 character shorter than "Romanian", but those names wasn't shortened.
I believe this is because some other words are much more difficult to shorten (more precisely, in their shortened form they may not convey the underlying meaning).
hero member
Activity: 504
Merit: 816
Top Crypto Casino
As far as I understand, this was done in order to save space in the navigation bar.  Smiley

I understand the reason but, however, this will not help too much if other translations will appear, right?

And this reason was not also applied to other mentioned translation, some of which has even more letters in their names. For example, "Indonesian" as a word is longer than "Romanian", and "Russian" only 1 character shorter than "Romanian", but those names wasn't shortened.
legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
As far as I understand, this was done in order to save space in the navigation bar.  Smiley

I understand the reason but, however, this will not help too much if other translations will appear, right?

In any case, I think there's still a lot of space remaining for not using those abbreviations and also for future translations to be listed. This is how the OP looks like on 1080p resolution, which is one of most used nowadays:



The empty space remaining can be seen highlighted. And, on bigger resolutions, the remaining space is even bigger, so there's no worry about the text not fitting the screen correctly Smiley
legendary
Activity: 1456
Merit: 5874
light_warrior ... 🕯️
If you look carefully, you can notice that Romanian and Portuguese appear as "Rom" and "Portug", instead of having their entire name displayed. Can you fix that too, please?
As far as I understand, this was done in order to save space in the navigation bar.  Smiley
legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
Thanks for pointing this out. The OP has just been updated.

Thank you for this update! However, I spotted a small inconsistency:

[quote=" MixTum in [Russian][Arabic][Indonesian][French][Rom][German][Portug][Filipino] Try Testing /?mix=free][Mix Free] & /][Tor]

If you look carefully, you can notice that Romanian and Portuguese appear as "Rom" and "Portug", instead of having their entire name displayed. Can you fix that too, please?
sr. member
Activity: 336
Merit: 292
RESERVED THIS PLACE FOR URDU LANGUAGE TRANSLATION OF [banned mixer]

I considered it's better to mentioned these ones as well, in case thepeterson and HONDACD125 forgot about their reservations.

Thanks Gazeta for reminding. I had completely forgotten about my reserve post. actually once I intended to start work on transaltion all Mixers ANN but due to some reasons I could not complete the work. Later I forgot about it but your reminder worked for me and I posted my first ANN translation in local boards. I have updated the reserved post and request OP to add my translation also in main page.


RESERVED THIS PLACE FOR URDU LANGUAGE TRANSLATION OF [banned mixer]

UPDATE

Successfully translated Main thread. you can check it in thr below link

https://bitcointalksearch.org/topic/m.63073725

Special thanks to GazetaBitcoin for reminding me.


hero member
Activity: 504
Merit: 816
Top Crypto Casino
Moreover, the MixTum mixing service is now available directly through the telegram bot. Find @mixtum_bot and follow the instructions. Very easy to use. Requires no more additional steps on your end.

Hey, I was trying to use the Telegram Bot, for no specific reason, just wanted to see who it works exactly. And it seems to me that nothing really happened, no instructions were provided. I started, but no options came out. Maybe I did something wrong, although I tried to reach it from different accounts, using links from the official site, from the message sited above and also by just finding the bot in the Telegram search. I am pretty sure this is the official bot, that is why everything should be legit. But I am still waiting for the command to operate but got no response so far (it has been 12 minutes now)

legendary
Activity: 1680
Merit: 6524
Fully-fledged Merit Cycler|Spambuster'23|Pie Baker
Hooooray!

And, meanwhile, a second raffle has also been launched Smiley

I am glad because I caught an empty slot at the second raffle Smiley It was incredible to see how fast the spots got occupied: 40 minutes for the first raffle and 22 minutes for the second one! Amazing!
Pages:
Jump to: