[BBR] Boolberry: Privacy and Security - Guaranteed Since 2014 - page 11.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: hashappliance on November 10, 2018, 09:34:19 PM

Quote from: crypto_zoidberg on November 05, 2018, 07:33:11 AM

Quote from: tbearhere on November 05, 2018, 07:22:45 AM

Anyone have a 1050 gtx mining. Please .. what hashrate do you get. Thx.

hashappliance can you give some numbers?

Here is a link to a spreadsheet that was created a while back.

https://docs.google.com/spreadsheets/d/1sYgIYu_31avZJdvJVkIltu2jk8LvH2BC84j9oyceTdU/edit?usp=sharing

If you guys want to fill in what your results are, once they are confirmed, I will add them to the top section.

Hope this is helpful, but I do not have any experience with a GTX 1050.

Also, you can probably get much faster responses in our telegram chat for miners at:

https://t.me/BBR_miners

Johnny

Thx hashappliance

On the chart...I think people are putting total watts used for Total Dissipated Power. TDP is in % of total power used and not total watts used. Wink

~~Need a column that says Total power used in watts.~~
Thx

EDIT: Ok I see...you're going by the manufacturers TDP.

hashappliance

copper member

Activity: 51

Merit: 0

Quote from: crypto_zoidberg on November 05, 2018, 07:33:11 AM

Quote from: tbearhere on November 05, 2018, 07:22:45 AM

Anyone have a 1050 gtx mining. Please .. what hashrate do you get. Thx.

hashappliance can you give some numbers?

Here is a link to a spreadsheet that was created a while back.

https://docs.google.com/spreadsheets/d/1sYgIYu_31avZJdvJVkIltu2jk8LvH2BC84j9oyceTdU/edit?usp=sharing

If you guys want to fill in what your results are, once they are confirmed, I will add them to the top section.

Hope this is helpful, but I do not have any experience with a GTX 1050.

Also, you can probably get much faster responses in our telegram chat for miners at:

https://t.me/BBR_miners

Johnny

hashappliance

copper member

Activity: 51

Merit: 0

Quote from: blacksunmun on November 10, 2018, 07:33:56 PM

hi this coin is algorithm wild keckak or X11? many webs says this coin is X11 included binance
PD: my english is bad sorry

Boolberry uses Wild Keccak.

Here is the link to miner thread that most people are using.

https://bitcointalksearch.org/topic/wildrig-new-miner-for-wild-keccak-algo-4589691

Here is a guide to get started at mining.blue:

http://mining.blue/#getting_started

We have a chat on Telegram specifically for miners, and there are people of all languages there:

https://t.me/BBR_miners

Hopefully this helps, and join the mining group on telegram if you need any assistance.

Johnny

blacksunmun

newbie

Activity: 14

Merit: 0

hi this coin is algorithm wild keckak or X11? many webs says this coin is X11 included binance
PD: my english is bad sorry

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: tbearhere on November 05, 2018, 07:22:45 AM

Anyone have a 1050 gtx mining. Please .. what hashrate do you get. Thx.

hashappliance can you give some numbers?

tbearhere

legendary

Activity: 3164

Merit: 1003

Anyone have a 1050 gtx mining. Please .. what hashrate do you get. Thx.

cryptonotefund

newbie

Activity: 48

Merit: 0

Boolberry is considered for adding to CryptoNote Index Fund assets

Already approved 6 coins:
Monero, Bytecoin, Karbo, Turtlecoin, Electroneum, DigitalNote.

Community need to select another 7 coins to the fund. Proposed for voting:
Masari, Bitcedi, Sumokoin, Qwertycoin, Dero, AEON, Stellite, Loki, Alloy Project, INTUcoin,
Fonero, Newton, Boolberry, Flakechain and Bitsum.

You can vote in telegram on our group http://t.me/cryptonotefund .
Just ask bot for /vote command, and he will send you voting options in pm.

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: dwarf0 on November 01, 2018, 09:27:58 AM

User 'crypto_zoidberg' has not chosen to allow messages from newbies
...

Alowed now

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: dwarf0 on November 01, 2018, 09:27:58 AM

User 'crypto_zoidberg' has not chosen to allow messages from newbies

Please name all the needed files and where to upload them

I`m running windows 7.
You may send all instructions to my pm.

Mail me please to zoidberg at boolberry c0m.
I need boolbd.log file (or Boolberry.log if you running GUI) which is located in "C:\Users\UserName\AppData\Roaming\boolb"

Thanks

dwarf0

newbie

Activity: 49

Merit: 0

User 'crypto_zoidberg' has not chosen to allow messages from newbies

Please name all the needed files and where to upload them

I`m running windows 7.
You may send all instructions to my pm.

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: dwarf0 on November 01, 2018, 02:43:43 AM

Sync process stuck at 1086236

2018-Nov-01 09:27:17.818053 [P2P4]Connecting to 207.154.240.198:10101(white=0, last_seen: d0.h0.m0.s34)...
2018-Nov-01 09:27:18.975076 [P2P7][207.154.240.198:10101 OUT]Sync data returned unknown top block: 1086236 -> 1165655 [79419 blocks (110 days) behind]

I have got several connections and huge incoming traffic but no futher movement for 2 days. I think I maybe need fresh blockchain.

.....

crypto_zoidberg , could you please refresh http://boolberry.com/downloads/blockchain.zip

Can you pm me log-file, i'll try to figure out why it not sync. Sorry for all these issues, and thank you for your patience!

dwarf0

newbie

Activity: 49

Merit: 0

Sync process stuck at 1086236

2018-Nov-01 09:27:17.818053 [P2P4]Connecting to 207.154.240.198:10101(white=0, last_seen: d0.h0.m0.s34)...
2018-Nov-01 09:27:18.975076 [P2P7][207.154.240.198:10101 OUT]Sync data returned unknown top block: 1086236 -> 1165655 [79419 blocks (110 days) behind]

I have got several connections and huge incoming traffic but no futher movement for 2 days. I think I maybe need fresh blockchain.

.....

crypto_zoidberg , could you please refresh http://boolberry.com/downloads/blockchain.zip

dwarf0

newbie

Activity: 49

Merit: 0

My ISP made my connection horribly slow. Now I`m thinking about changing the ISP. I spent 2 days for getting to 200000 from 0 blocks. I did not know the file was there all the time Cheesy

. If I knew it I would complete the synchronization by this time.

Thank you crypto_zoidberg and best luck to you too

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: dwarf0 on October 28, 2018, 02:31:24 PM

Could somebody please upload the blockchain folder with data.mdb inside. I`m running windows if it matters.
Zip it before upload please.

We still work on GUI able to pre-download blockchain, but if you run boobd from your package it will do all the work automatically, just wait until pre-download phase is completed.
Or simply download this: http://boolberry.com/downloads/blockchain.zip

Best luck!

dwarf0

newbie

Activity: 49

Merit: 0

Could somebody please upload the blockchain folder with data.mdb inside. I`m running windows if it matters.
Zip it before upload please.

gigabyted

hero member

Activity: 906

Merit: 500

Quote from: skygonga on October 22, 2018, 02:37:20 PM

Ravencoin's recent price increase is very big, I think BBR is better! I believe that BBR will rise!

You think? BBR is definitely better than raven, raven would go under radar if it wasn't of those celebrities...

skygonga

newbie

Activity: 52

Merit: 0

Ravencoin's recent price increase is very big, I think BBR is better! I believe that BBR will rise!

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: dobriydimka on October 19, 2018, 03:46:53 PM

Quote from: crypto_zoidberg on October 19, 2018, 02:47:47 PM

Quote from: dobriydimka on October 19, 2018, 01:04:15 PM

Quote from: crypto_zoidberg on October 17, 2018, 01:23:40 PM

You are using very old build bro, please download the latest release https://github.com/cryptozoidberg/boolberry/releases/tag/v0.3.0.80 , it should work perfect!

"22841 blocks behind"
and no connections 2 days (((

Please try to stop it, remove p2pstate.bin file and re-run, this should help with connectivity.

Thank you. Its work!

My pleasure!

crypto_zoidberg

hero member

Activity: 976

Merit: 646

Quote from: versprichnix on October 19, 2018, 05:08:47 PM

Quote from: clintar2 on October 19, 2018, 03:25:15 AM

...
Try just doing

Code:

make daemon

and

Code:

make simplewallet

so it skips the tests that fail. Maybe

Code:

 make qt-boolbd

if you are trying to make that.
In tests/CMakeLists.txt, the ones that are failing need

Code:

zlibstatic

added to their target_link_libraries lines

It's running fine now. Did change the following three lines in "tests/CMakeLists.txt":

Quote

target_link_libraries(functional_tests zlibstatic currency_core wallet common crypto upnpc-static ${CMAKE_THREAD_LIBS_INIT} ${Boost_LIBRARIES}) target_link_libraries(unit_tests zlibstatic currency_core common wallet crypto gtest_main lmdb ${CMAKE_THREAD_LIBS_INIT} ${Boost_LIBRARIES}) target_link_libraries(exchange_test zlibstatic ${CMAKE_THREAD_LIBS_INIT} ${Boost_LIBRARIES})

Thanks a lot for posting solution, we were quite busy these days, I just pushed this update which fixes the issue.
Anyone is welcome to pull-request in this situations.

versprichnix

sr. member

Activity: 876

Merit: 291

Quote from: clintar2 on October 19, 2018, 03:25:15 AM

...
Try just doing

Code:

make daemon

and

Code:

make simplewallet

so it skips the tests that fail. Maybe

Code:

 make qt-boolbd

if you are trying to make that.
In tests/CMakeLists.txt, the ones that are failing need

Code:

zlibstatic

added to their target_link_libraries lines

It's running fine now. Did change the following three lines in "tests/CMakeLists.txt":

Quote

target_link_libraries(functional_tests zlibstatic currency_core wallet common crypto upnpc-static ${CMAKE_THREAD_LIBS_INIT} ${Boost_LIBRARIES}) target_link_libraries(unit_tests zlibstatic currency_core common wallet crypto gtest_main lmdb ${CMAKE_THREAD_LIBS_INIT} ${Boost_LIBRARIES}) target_link_libraries(exchange_test zlibstatic ${CMAKE_THREAD_LIBS_INIT} ${Boost_LIBRARIES})

Topic: [BBR] Boolberry: Privacy and Security - Guaranteed Since 2014 - page 11. (Read 1210779 times)