Pages:
Author

Topic: [BCN] Bytecoin. Secure, private, untraceable since 2012 - page 41. (Read 1070272 times)

newbie
Activity: 108
Merit: 0
Wallet synchronized. Top block height: 1593614 / Received: Less than 1 minute ago.
Synchronization: 700 blocks left (2 minutes ago)
Wallet synchronized. Top block height: 1593616 / Received: Less than 1 minute ago.
Wallet synchronized. Top block height: 1593617 / Received: 1 minute ago.
Synchronization: 699 blocks left (1 minute ago)
Wallet synchronized. Top block height: 1593618 / Received: 1 minute ago.

Damn it! Bytecoin Wallet v3.2.3 (developing version) does not work properly. There are still 700 blocks left.
newbie
Activity: 108
Merit: 0
Bytecoin Wallet v3.2.3
i don't know bro.
if you have a fast connection, test that version.

i'm downloading v3.1.1
from 1227000 blocks to 1062000 blocks the second hour.

I'm not sure. Let's see.

Step #1
Backup blockchain data.mdb (from v3.2.2)

Step #2
Installing, restore data.mdb

The synchronization of the last 130000 blocks (last 6 months) was started. It looks like it overwrites what is not properly synchronized.

Note: This may not be a stable version but is available for download.
newbie
Activity: 108
Merit: 0
Hello! I'm using the version 3.1.1. Everything works fine!
Over the past two days, I repeatedly withdrew money from exchanges to a local wallets, then sent money back to the stock exchanges.
Everything works VERY FAST AND GOOD!
Synchronization occurs very quickly too.
I really like this 3.1.1 version.
i don't remember why I tried with v3.2.2

testing with v3.1.1.
nope... it doesn't work with remote node:
Quote
--bytecoind-remote-address=107.6.143.228:8081

it says:
Quote
synchronization: 1593213 blocks left (unknown)

and it stays there doing nothing.
and i'm not going to download blockchain again for nothing.


Only 10 minutes ago I synchronized 2 local wallets. I just transferred money from Binance to two local wallets. Everything was done very quickly. Just a few minutes.
I'm using Windows 7 64bit.


It does not solve the problem. The problem is deeper.

Please, dont write with bold letters. Thanks
member
Activity: 295
Merit: 10
We are sorry to hear about this issue but I have been assured by the dev team that they are working to get it fixed as soon as possible. Thank you for your patience in the meantime!
and... what do you recommend?
because i don't wanna waste a few days downloading +23GB for nothing.

Fresh installation/sync from scratch, yes.
ok.
so... same error connecting to a remote node or downloading the blockchain.
the wallet v3.2.2 doesn't sync completely.

I would hold off re syncing the blockchain until you hear from me / the devs as to not waste your time. They are working on a solution to this and should announce something very soon.
newbie
Activity: 108
Merit: 0
And these 700+ blocks at the end of synchronization are not synchronized. Blocks just add up.
Did you download again the blockchain with the new wallet v3.2.2? +23GB?

Fresh installation/sync from scratch, yes.
member
Activity: 236
Merit: 12
And these 700+ blocks at the end of synchronization are not synchronized. Blocks just add up.
Did you download again the blockchain with the new wallet v3.2.2? +23GB?
the same here, and yep new installation with nothing in the data directory. Blockchain is not downloading connected to remote node. Only last 2+ months need to be synced in this mode and still about 700+ last blocks missing - wallet never sync to the latest block. Wallet still keeps the gap of 700+ blocks from the last in this mode.
member
Activity: 295
Merit: 10
What does magic number 728 mean? Eg.

Stuck on 199509 blocks, back to 200237,
synchronizing,
... etc, synchronizing, two steps forward, one back.

I do not know what wallet does (Bytecoin Wallet GUI v3.2.2, Windows 7, 64-bit). In any case for me this is a waste of time. I do not know how synchronizing (in this way) can be successfully completed at all.

In addition, during the synchronization, the wallet occupies the PC (and I do not have a weak machine). At that time, I can not do anything if I want to sync as soon as possible.

I believe in Bytecoin and I do not lose hope but I'm a little disappointed. We and still have a problem with the Bytecoin network and wallet. And that is the cause of all of our problems.

And these 700+ blocks at the end of synchronization are not synchronized. Blocks just add up.

What now?

We are sorry to hear about this issue but I have been assured by the dev team that they are working to get it fixed as soon as possible. Thank you for your patience in the meantime!
newbie
Activity: 108
Merit: 0
What does magic number 728 mean? Eg.

Stuck on 199509 blocks, back to 200237,
synchronizing,
... etc, synchronizing, two steps forward, one back.

I do not know what wallet does (Bytecoin Wallet GUI v3.2.2, Windows 7, 64-bit). In any case for me this is a waste of time. I do not know how synchronizing (in this way) can be successfully completed at all.

In addition, during the synchronization, the wallet occupies the PC (and I do not have a weak machine). At that time, I can not do anything if I want to sync as soon as possible.

I believe in Bytecoin and I do not lose hope but I'm a little disappointed. We and still have a problem with the Bytecoin network and wallet. And that is the cause of all of our problems.

And these 700+ blocks at the end of synchronization are not synchronized. Blocks just add up.

What now?
jr. member
Activity: 280
Merit: 4
Community's concern and demand should be addressed without any delay.
Do not trust this shady development team, they will not even tell you the actual amount of Premined coins, I have asked over 5 times here with zero replies, that tells me they have something to hide.

They are just profiting from pumping and dumping their own, I assume HEAVILY premined BCN.
member
Activity: 236
Merit: 12
I found out that this is ok, it is synced the way that wallet will be 2-4 minutes (700+ blocks) behind the newest block using remote node. You can see log that wallet is syncing when new blocks are generated but still keep the gap of 700+ blocks back. It is not the best solution and the tx outputs are processed hours but it is working this way. Devs?
Are you sure of this?
yes, when I read a log during this sync, it is accepting new blocks but still keeps a gap about 700+ blocks behind. Just let it run and you will see, it will still be at several minutes behind current block.
member
Activity: 236
Merit: 12
using a remote node:

wallet v3.2.2 stops at "~760 blocks left".
tested on windows and linux.

I found out that this is ok, it is synced the way that wallet will be 2-4 minutes (700+ blocks) behind the newest block using remote node. You can see log that wallet is syncing when new blocks are generated but still keep the gap of 700+ blocks back. It is not the best solution and the tx outputs are processed hours but it is working this way. Devs?
copper member
Activity: 449
Merit: 2
web3 developer | Youtuber
Byte coin soon   10s


Angry
NewBie!

pls wait till 31st august and then make comment so that would be more solid.
and that will decide BCN =100 or 10 SAT.
member
Activity: 236
Merit: 12
Do you want to fuck up your Bytecoin Wallet and download +23GB of blockchain again?
upgrade from v3.1.1 to v3.2.2

testing with a fresh installation of Bytecoin Wallet v3.2.2 and a remote Bytecoin Node.
connecting the wallet to a remote node, you don't need to download all the whole blockchain.
How connect to remote Bytecoin Node
Code:
--bytecoind-remote-address=107.6.143.228:8081




I updated to 3.2.2 version and have been waiting for 20 hours without any progress in sync. Total broken wallet. The exchange wallet is more secure and stable than your uncompleted "wallet" devs. Sorry but this is not really good job. Previous version needed 3 days to full sync from the scratch and this 1 is not able to continue in sync with old data folder. It needs something to do with old chain data, but it seems that it is going to process it more than new sync.
I understand Poloniex now ... It is not working at all and now I know why Poloniex has put BCN under maintenance and disabled deposits/withdraws.

using your remote address still needs sync for more than 2 months back. Who is the owner of this node 107.6.143.228:8081 ? Is it secure to connect direct to non-official nodes which are not in the devs announcement?
NrX
sr. member
Activity: 770
Merit: 254
Here developers need to payment attention to make available some light version of wallet. Lot of people are coming here and have common issue with wallet to store their coins. For example I also have nought recently and left my coins on exchange which is undesirable action but there is no alternative. Community's concern and demand should be addressed without any delay.
newbie
Activity: 108
Merit: 0
Problem with Bytecoin Wallet GUI v3.2.2, Windows 7, 64-bit.

I began to doubt that the blockchain file in some way coruppted. How and why, I do not know. I do not get any error. Synchronization goes from 1000+ to 736 and here it all stops.

I have now made a new installation. This is the third fresh installation. Everything from the beginning. Synchronization has started. Surprisingly fast. For now everything is fine. We'll see how this will end.
newbie
Activity: 20
Merit: 0
Byte coin soon   10s

newbie
Activity: 108
Merit: 0
What happens to Bytecoin Wallet (GUI v3.2.2, Win 7)? For the last 24 hours, sync is a terrible slow. I have 700 and some blocks to sync. And it just does not work.

A few days ago, everything was normal.

The problem is not on my side. That's something on the Bytecoin network. Take a look at https://hitbtc.com/system-health

I'm interested in what's going on? Can we expect a wallet update soon?

How did you get yours to work I keep getting error 3

Frankly, I do not know what is Error #3.

First
I installed v3.2.2 and made a restore from the blockchain data.mdb file. Then I uninstalled everything. I thought, it's better to go from the start.

Second
On August 7, I installed fresh v3.2.2 and left sync from the beginning. On my internet speed (slow), the synchronization lasted for about 48 hours.

Everything was fine by yesterday. I usually do synchronization at least once a day. Today, sync is completely dead. The blocks just pop up.
member
Activity: 128
Merit: 11
What happens to Bytecoin Wallet (GUI v3.2.2, Win 7)? For the last 24 hours, sync is a terrible slow. I have 700 and some blocks to sync. And it just does not work.

A few days ago, everything was normal.

The problem is not on my side. That's something on the Bytecoin network. Take a look at https://hitbtc.com/system-health

I'm interested in what's going on? Can we expect a wallet update soon?

How did you get yours to work I keep getting error 3
member
Activity: 295
Merit: 10
We have made a review of the most recent additions and improvements to the Bytecoin software. You can read it here:

https://bytecoin.org/blog/the-bytecoin-software-review/


Pages:
Jump to: