BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 497.

fjavi

newbie

Activity: 11

Merit: 0

Quote from: ?? on ??

Quote from: inblue on April 24, 2018, 08:27:31 AM

Quote from: slovakia on April 24, 2018, 12:27:43 AM

every new user/miner add these nodes to config with peerers problem

addnode=node.biblepay.org:40000
addnode=biblepay.inspect.network
addnode=node.biblepay-explorer.org

Don't recommend this, the second and third node are both dead, and the first node line isn't needed, it's already hard coded in the wallet.

For syncing issues, I would try going to the last pages of http://explorer.biblepay.org:3001/network , finding 1.1.2.1+ IP addresses and then in the console window type:

Code:

addnode "x.x.x.x:x" "onetry"

The problem with the node.biblepay.org being the master, it is contributing to the sync/crash issues.

Since it was down, many users were unable to use the client. this is a huge centralization issue

Lesson: if you want to take down bbp only go after 1 node.

This would only affect new nodes. After a node connects for the first time, it keeps a list of possible peers so even if the original master is down it can keep on working.

And this is not a "problem" of BBP, it happens with all Bitcoin-like coins.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: inblue on April 24, 2018, 08:27:31 AM

Quote from: slovakia on April 24, 2018, 12:27:43 AM

every new user/miner add these nodes to config with peerers problem

addnode=node.biblepay.org:40000
addnode=biblepay.inspect.network
addnode=node.biblepay-explorer.org

Don't recommend this, the second and third node are both dead, and the first node line isn't needed, it's already hard coded in the wallet.

For syncing issues, I would try going to the last pages of http://explorer.biblepay.org:3001/network , finding 1.1.2.1+ IP addresses and then in the console window type:

Code:

addnode "x.x.x.x:x" "onetry"

Correct, and you don't need the port, and the client needs network access to sync, and the client auto-manages the peers.dat file anyway, so its completely bad advice.

There is only one sentence needed with biblepay for addnodes:

"If you are going to be syncing outside the US in a DMZ zone, please add an addnode from that country manually" or "if node.biblepay.org is down add node.biblepay-explorer.org"

I just tested node.biblepay-explorer and it works:

telnet node.biblepay-explorer.org 40000

UP

inblue

full member

Activity: 462

Merit: 103

Quote from: slovakia on April 24, 2018, 12:27:43 AM

every new user/miner add these nodes to config with peerers problem

addnode=node.biblepay.org:40000
addnode=biblepay.inspect.network
addnode=node.biblepay-explorer.org

Don't recommend this, the second and third node are both dead, and the first node line isn't needed, it's already hard coded in the wallet.

For syncing issues, I would try going to the last pages of http://explorer.biblepay.org:3001/network , finding 1.1.2.1+ IP addresses and then in the console window type:

Code:

addnode "x.x.x.x:x" "onetry"

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: ?? on ??

WCG questions

I increased WCG RAC significantly and it seems to stay with old value for more than one day now.

Questions:
1) when "exec getboincinfo" query WCG site for RAC data ?
2) how WCGRAC is calculated ? is it same as : WCG->MyContributionHsitory->PointsGenerated ?

Its updated once per day at 00:00 UTC. If you have a Sanctuary, I can point you to the grep command to retrieve the source WCG RAC.

West said that WCG Points = 2.5 RAC. Honestly best thing to do in this case is the following:
- Install BOINC manager with its UI on your machine
- Click the Project ROW
- Log down the WCG "Recent Average Credit" value
- Reconcile this value with the WCG web portal

This should equal that mysterious 2.5* conversion.

Note that we use BOINC's WCG value for our RAC intake.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: slovakia on April 24, 2018, 07:20:34 AM

bible_pay and you must deleting my posts about bugs? are you OK?

PPL stop sending your BBP to CCEX+SOUTH= all BBP will be lost ..they have to fix it

Please re-read my posts and stop posting illegitimate information, and please, try to be a Christian.

slovakia

full member

Activity: 770

Merit: 100

bible_pay and you must deleting my posts about bugs? are you OK?

PPL stop sending your BBP to CCEX+SOUTH= all BBP will be lost ..they have to fix it

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: coin_analyst on April 24, 2018, 04:27:29 AM

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

Fixed - all we needed was a reboot of the seed node.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: Lichtsucher on April 24, 2018, 02:26:23 AM

Quote from: dave_bbp on April 24, 2018, 01:01:31 AM

I copied a wallet.dat from a Pi to the tinker board and it immediately started syncing. Strangely enough when I copied the whole core folder from the same Pi to the tinker it didn't work...

I had a similar problem on one system, to get it syncing again, I had to delete the blockchain.

This is because we mark blocks as dirty, and there is no way to reconsider the block once its dirty. Im taking a look at that in addition to the crash during the reorg today.

I went ahead and told C-CEX to upgrade in skype (they are not in the office though). I notified SouthXChange via freshdesk.

coinsinspect

newbie

Activity: 164

Merit: 0

1) I clean install 1.1.2.2 on Linux
2) put in .biblepaycore folder only 1 file: my wallet.dat
3) ran ./biblepayd -daemon
4) getwalletinfo show me 0 balance for ~ 2 hours
5) decided to run ./biblepay-cli stop
6) ran again: ./biblepayd -daemon
7) see correct balance after few minutes

coin_analyst

newbie

Activity: 39

Merit: 0

Quote from: bible_pay on April 24, 2018, 04:59:04 AM

Quote from: coin_analyst on April 24, 2018, 04:27:29 AM

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

I dont believe there is a problem with 1.1.2.2+, just delete the peers.dat, the banlist.dat, the chainstate and the blocks and resync.

I believe our two exchanges do have a problem, because of the small governance object size. I believe we have been creating superblocks larger than they will accept.

I just contacted both to upgrade, but unfortunately ccex ticket queue is full, so I sent an e-mail.

"just delete the peers.dat, the banlist.dat, the chainstate and the blocks and resync."
I had tried a few times this step but not work, still can't sync and stopped 0 block. Tested in Ubuntu 16.04 system.

vahtis

newbie

Activity: 153

Merit: 0

Quote from: ?? on ??

bible_pay i tried 1123 on new machine and its problem with wallet, both EXCHANGES got problem with BBP too = not syncing

check it with new wallet and youll see, dont be little boy and fix it Roll Eyes

im sent 5 bbp to CCEX and didnt received, it looks that exchanges is on FORK

https://explorer.biblepay-central.org/tx/f92d3601f233b942f1193f26c233836bde7446d905ca6d068ec40c997e5773f5

Windows wallet is syncing from scratch.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: SVK Noko on April 24, 2018, 05:13:28 AM

Quote from: bible_pay on April 24, 2018, 04:59:04 AM

Quote from: coin_analyst on April 24, 2018, 04:27:29 AM

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

I dont believe there is a problem with 1.1.2.2+, just delete the peers.dat, the banlist.dat, the chainstate and the blocks and resync.

I believe our two exchanges do have a problem, because of the small governance object size. I believe we have been creating superblocks larger than they will accept.

I just contacted both to upgrade, but unfortunately ccex ticket queue is full, so I sent an e-mail.

Rob try to do like that yourself and you will see.

Noko, I don't come on and make things up, I see, I did, its done. Re-read the post (about seed nodes - and node.biblepay.org), and try again.

And please confirm once you complete.

Id appreciate if someone would explain to the user a page back that no coins can be lost unless they are mined on a fork - explain how to track the coins to point A or B.

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: bible_pay on April 24, 2018, 04:59:04 AM

Quote from: coin_analyst on April 24, 2018, 04:27:29 AM

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

I dont believe there is a problem with 1.1.2.2+, just delete the peers.dat, the banlist.dat, the chainstate and the blocks and resync.

I believe our two exchanges do have a problem, because of the small governance object size. I believe we have been creating superblocks larger than they will accept.

I just contacted both to upgrade, but unfortunately ccex ticket queue is full, so I sent an e-mail.

Rob try to do like that yourself and you will see.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: SVK Noko on April 24, 2018, 04:58:53 AM

Quote from: bible_pay on April 24, 2018, 04:55:44 AM

Quote from: SVK Noko on April 23, 2018, 11:41:56 PM

Quote from: GaryH on April 23, 2018, 05:41:21 PM

saw that my wallet was old this morning after I had to restart it, guess it had shut down which it's never done.

The new wallet was running all day and no updates so I removed the blocks, chainstate, everything except the wallet and biblepay.conf.

Still no block source to sync to. I can ping node.biblepay.org so I'm lost at this point.

I've tried removing, reinstalling, trying the 32 bit version, nothing seems to work. Rosetta @ home works fine but the wallet is a mystery.

Guess I'll try my other computer and see if I have any luck. I like BBP but a guy has to be a IT tech to keep all of this running and setting it all up.

GaryH

Maybe I have some progress. I copied the old peers.dat from previously function wallet (version 1.1.1.9) to the datafolder for a new wallet (1.1.2.3). After restart wallet I made reindex (without deleting files from folders) and it started to sync. It looks now Im completely synchronized, but I dont know how long :-) man never knows here. Try it, if you dont have old peers. dat, I can send you mine. I dont know if this was the solution, but I didnt made anything else this Morning. Send feedback if it works.

Technically you can just delete peers.dat, and you dont need an addnode in the biblepay.conf. It should sync without those.
Most likely you just had to delete banlist.dat.

Thats nice but Rob please understand that it doesnt work even when you delete almost all files and generate new via reindex.

It was our seed node (node.biblepay.org) was down. It actually wasn't the wallet.
Now new users can still sync on 1.1.2.3 without an addnode and without peers.dat.

So I see the reason for the forks forming, now that we have a supermajority on 1.1.2.1+, the large governance object is being honored and I believe this has forked the exchanges. We'll get them to upgrade- its a pity we were not able to schedule a mandatory in the middle of our release schedule, but it is what it is.

I'm still looking at our reorg code that marks a block as bad and then crashes during a reorg. Thats why things go south when we have a chain fork. These two issues go hand-in-hand.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: coin_analyst on April 24, 2018, 04:27:29 AM

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

I dont believe there is a problem with 1.1.2.2+, just delete the peers.dat, the banlist.dat, the chainstate and the blocks and resync.

I believe our two exchanges do have a problem, because of the small governance object size. I believe we have been creating superblocks larger than they will accept.

I just contacted both to upgrade, but unfortunately ccex ticket queue is full, so I sent an e-mail.

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: bible_pay on April 24, 2018, 04:55:44 AM

Quote from: SVK Noko on April 23, 2018, 11:41:56 PM

Quote from: GaryH on April 23, 2018, 05:41:21 PM

saw that my wallet was old this morning after I had to restart it, guess it had shut down which it's never done.

The new wallet was running all day and no updates so I removed the blocks, chainstate, everything except the wallet and biblepay.conf.

Still no block source to sync to. I can ping node.biblepay.org so I'm lost at this point.

I've tried removing, reinstalling, trying the 32 bit version, nothing seems to work. Rosetta @ home works fine but the wallet is a mystery.

Guess I'll try my other computer and see if I have any luck. I like BBP but a guy has to be a IT tech to keep all of this running and setting it all up.

GaryH

Maybe I have some progress. I copied the old peers.dat from previously function wallet (version 1.1.1.9) to the datafolder for a new wallet (1.1.2.3). After restart wallet I made reindex (without deleting files from folders) and it started to sync. It looks now Im completely synchronized, but I dont know how long :-) man never knows here. Try it, if you dont have old peers. dat, I can send you mine. I dont know if this was the solution, but I didnt made anything else this Morning. Send feedback if it works.

Technically you can just delete peers.dat, and you dont need an addnode in the biblepay.conf. It should sync without those.
Most likely you just had to delete banlist.dat.

Thats nice but Rob please understand that it doesnt work even when you delete almost all files and generate new via reindex.

bible_pay

full member

Activity: 1176

Merit: 215

Jesus is the King of Kings and Lord of Lords

Quote from: SVK Noko on April 23, 2018, 11:41:56 PM

Quote from: GaryH on April 23, 2018, 05:41:21 PM

saw that my wallet was old this morning after I had to restart it, guess it had shut down which it's never done.

The new wallet was running all day and no updates so I removed the blocks, chainstate, everything except the wallet and biblepay.conf.

Still no block source to sync to. I can ping node.biblepay.org so I'm lost at this point.

I've tried removing, reinstalling, trying the 32 bit version, nothing seems to work. Rosetta @ home works fine but the wallet is a mystery.

Guess I'll try my other computer and see if I have any luck. I like BBP but a guy has to be a IT tech to keep all of this running and setting it all up.

GaryH

Maybe I have some progress. I copied the old peers.dat from previously function wallet (version 1.1.1.9) to the datafolder for a new wallet (1.1.2.3). After restart wallet I made reindex (without deleting files from folders) and it started to sync. It looks now Im completely synchronized, but I dont know how long :-) man never knows here. Try it, if you dont have old peers. dat, I can send you mine. I dont know if this was the solution, but I didnt made anything else this Morning. Send feedback if it works.

Technically you can just delete peers.dat, and you dont need an addnode in the biblepay.conf. It should sync without those.
Most likely you just had to delete banlist.dat.

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: coin_analyst on April 24, 2018, 04:27:29 AM

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

Yes, question and issue are Exchanges wallets as well. When you try to send BBP from C-cex, system just write you address you specified for withdrawal is invalid. Bye bye.

coin_analyst

newbie

Activity: 39

Merit: 0

Hi Rob,

Tested BBP program seem can't SYNC in first time run that, even tried to add many node.

Please fix it ASAP , exchange wallet also offline as SYNC ERROR, thanks.

znffal

full member

Activity: 364

Merit: 102

Quote from: znffal on April 23, 2018, 04:35:57 PM

Please continue to vote. We want to surpass 1500 votes. We have been moving up the rankings!

https://nextexchange.featureupvote.com/suggestions/3384/biblepay-bbp

Please vote! Your help needed to get to 1500.

We are a coin not an ERC20 token so we need 1500 votes (ERC20 tokens need only 1000)

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 497. (Read 243386 times)