BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 498.

Lichtsucher

jr. member

Activity: 219

Merit: 3

Quote from: afeno on April 23, 2018, 03:39:45 PM

Light, did you remove the 150% rule from PurePool? Is the pool now aligned with the mining rules only?
Sorry if I missed the post. But I noticed that the comment about 150% has been removed.

Hi afeno,

the rules are still there, but with the integration of the better CPID checks in the last weeks, nearly all miners are in the "good" zone. And the rest seems only have bad luck at times, or good luck. So I disabled the view for now and replaced it with the error view (if errors do exist for the user).

Lichtsucher

jr. member

Activity: 219

Merit: 3

Quote from: znffal on April 23, 2018, 11:04:36 PM

Quote from: fahq420 on April 23, 2018, 11:01:41 PM

and how do i get rid if Illegal CPID on purepool?

Not sure about purepool. Hopefully the guy that runs the pool can answer when he sees the question.

Having a valid CPID with Magnitude

The Checks onthe CPID are done by the biblepay client and are the same that are required to find a block.

Lichtsucher

jr. member

Activity: 219

Merit: 3

Quote from: dave_bbp on April 24, 2018, 01:01:31 AM

I copied a wallet.dat from a Pi to the tinker board and it immediately started syncing. Strangely enough when I copied the whole core folder from the same Pi to the tinker it didn't work...

I had a similar problem on one system, to get it syncing again, I had to delete the blockchain.

jaapgvk

full member

Activity: 574

Merit: 104

There is a fake BiblePay Twitter account that is trying to scam people. If many people report the account I'm sure it will soon be deleted by Twitter:
https://twitter.com/BiblePai

dave_bbp

jr. member

Activity: 405

Merit: 3

Quote from: dave_bbp on April 23, 2018, 04:46:24 PM

I (also) have a strange problem with the daemon: My "heat" miners are 3 Raspberry Pi and 1 ASUS tinker board, all running Ubuntu 16.04 LTS (ARM version). Since today (not sure if it's connected to some update, it might be...) the Pis work but the tinker board always shows "blocks: 0". [...]

Well, that was easy...
I copied a wallet.dat from a Pi to the tinker board and it immediately started syncing. Strangely enough when I copied the whole core folder from the same Pi to the tinker it didn't work...

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: slovakia on April 24, 2018, 12:49:07 AM

ROB wallet 1123 is broken..... i tried sync with 1123 on new machine and w/chance, cant find peers ... can you fix it? thx

Agree 100% sure is broken. Not possible to run this wallet without old backed up files.

slovakia

full member

Activity: 770

Merit: 100

ROB wallet 1123 is broken..... i tried sync with 1123 on new machine and w/chance, cant find peers ... can you fix it? thx

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: slovakia on April 24, 2018, 12:27:43 AM

every new user/miner add these nodes to config with peerers problem

addnode=node.biblepay.org:40000
addnode=biblepay.inspect.network
addnode=node.biblepay-explorer.org

On another machine with the same problem, I copied old peers.dat in datafolder plus add new nodes, according to slovakia's last post. Everything works fine (on the first look) we will see tomorrow morning...

slovakia

full member

Activity: 770

Merit: 100

every new user/miner add these nodes to config with peerers problem

addnode=node.biblepay.org:40000
addnode=biblepay.inspect.network
addnode=node.biblepay-explorer.org

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: GaryH on April 23, 2018, 05:41:21 PM

saw that my wallet was old this morning after I had to restart it, guess it had shut down which it's never done.

The new wallet was running all day and no updates so I removed the blocks, chainstate, everything except the wallet and biblepay.conf.

Still no block source to sync to. I can ping node.biblepay.org so I'm lost at this point.

I've tried removing, reinstalling, trying the 32 bit version, nothing seems to work. Rosetta @ home works fine but the wallet is a mystery.

Guess I'll try my other computer and see if I have any luck. I like BBP but a guy has to be a IT tech to keep all of this running and setting it all up.

GaryH

Maybe I have some progress. I copied the old peers.dat from previously function wallet (version 1.1.1.9) to the datafolder for a new wallet (1.1.2.3). After restart wallet I made reindex (without deleting files from folders) and it started to sync. It looks now Im completely synchronized, but I dont know how long :-) man never knows here. Try it, if you dont have old peers. dat, I can send you mine. I dont know if this was the solution, but I didnt made anything else this Morning. Send feedback if it works.

znffal

full member

Activity: 364

Merit: 102

Quote from: fahq420 on April 23, 2018, 11:11:17 PM

u mean the one in my wallet config?

I mean the one that you send PoDC updates from for your stake. I checked and it is.
I don't know for sure, this is a bit of a guess, but I guess that it is adding up all the PoDC transactions (and you receive the same amount back to the same address). So even if you only had 1 BBP in there, maybe it would get sent 100 times so an address could say received 100 BBP.

fahq420

newbie

Activity: 65

Merit: 0

u mean the one in my wallet config?

znffal

full member

Activity: 364

Merit: 102

Quote from: fahq420 on April 23, 2018, 11:05:49 PM

1.1.2.3 wallet

why does it say on explorer 1.5 mil coins recieved?

I couldn't tell you. It only goes back 10 pages. Is this your PoDC address?

fahq420

newbie

Activity: 65

Merit: 0

1.1.2.3 wallet

why does it say on explorer 1.5 mil coins recieved?

znffal

full member

Activity: 364

Merit: 102

Quote from: SVK Noko on April 23, 2018, 11:03:31 PM

Quote from: GaryH on April 23, 2018, 05:41:21 PM

saw that my wallet was old this morning after I had to restart it, guess it had shut down which it's never done.

The new wallet was running all day and no updates so I removed the blocks, chainstate, everything except the wallet and biblepay.conf.

Still no block source to sync to. I can ping node.biblepay.org so I'm lost at this point.

I've tried removing, reinstalling, trying the 32 bit version, nothing seems to work. Rosetta @ home works fine but the wallet is a mystery.

Guess I'll try my other computer and see if I have any luck. I like BBP but a guy has to be a IT tech to keep all of this running and setting it all up.

Has anybody any Idea how to fix this problem? More of us have the same issue, installed new wallet 1.1.2.3 --> No block source available and 0 active connection to Biblepay network.

Rob? Is the way how to fix it?

Thanks.

Not sure if relevant, but I have these nodes in my config

addnode=node.biblepay.org:40000
addnode=biblepay.inspect.network
addnode=node.biblepay-explorer.org

znffal

full member

Activity: 364

Merit: 102

Quote from: fahq420 on April 23, 2018, 11:01:41 PM

how do i reset the txids or w/e then, cuz my balance shows 900 ish in the wallet, after deleting the blockchain and redownloading

and how do i get rid if Illegal CPID on purepool?

You could try
"Tools"
"Wallet Repair"
"Recover trasactions 1" button

After that I'd probably do the same but press the "Rebuild index" button

Not sure about purepool. Hopefully the guy that runs the pool can answer when he sees the question.

What wallet version are you using?

SVK Noko

newbie

Activity: 267

Merit: 0

Quote from: GaryH on April 23, 2018, 05:41:21 PM

saw that my wallet was old this morning after I had to restart it, guess it had shut down which it's never done.

The new wallet was running all day and no updates so I removed the blocks, chainstate, everything except the wallet and biblepay.conf.

Still no block source to sync to. I can ping node.biblepay.org so I'm lost at this point.

I've tried removing, reinstalling, trying the 32 bit version, nothing seems to work. Rosetta @ home works fine but the wallet is a mystery.

Guess I'll try my other computer and see if I have any luck. I like BBP but a guy has to be a IT tech to keep all of this running and setting it all up.

Has anybody any Idea how to fix this problem? More of us have the same issue, installed new wallet 1.1.2.3 --> No block source available and 0 active connection to Biblepay network.

Rob? Is the way how to fix it?

Thanks.

fahq420

newbie

Activity: 65

Merit: 0

how do i reset the txids or w/e then, cuz my balance shows 900 ish in the wallet, after deleting the blockchain and redownloading

and how do i get rid if Illegal CPID on purepool?

znffal

full member

Activity: 364

Merit: 102

Quote from: fahq420 on April 23, 2018, 10:52:11 PM

23:51:25

getaddressbalance BF82a4mCHgYsQVeATQQ2Xq9Mh71SX4CqM2

23:51:25

Error: Error parsing JSON:BF82a4mCHgYsQVeATQQ2Xq9Mh71SX4CqM2

i've some how lost over 20k coins...

Looks OK?
http://explorer.biblepay.org:3001/address/BF82a4mCHgYsQVeATQQ2Xq9Mh71SX4CqM2

fahq420

newbie

Activity: 65

Merit: 0

23:51:25

getaddressbalance BF82a4mCHgYsQVeATQQ2Xq9Mh71SX4CqM2

23:51:25

Error: Error parsing JSON:BF82a4mCHgYsQVeATQQ2Xq9Mh71SX4CqM2

i've some how lost over 20k coins...

Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 498. (Read 243386 times)