Topic: BiblePay - New Coin Launch - Official Thread - page 161. (Read 119850 times)
Its now an hour and i still receive nothing. I have i7 processor, how can i get a block faster? It should be fast right because were few mining.
Hello, this is very interesting, I would like to mine, but I don't know about, conf or how to sync, I downloaded the wallet, and the bar for sync says 0 hours, how to syncs the wallet? which files I modify, what do i put in them? I'm new to this, so if anyone could help that would be appreciated 
.
. santa@fanta:~/coins/biblepay/src# ./biblepay-cli getgenerate
true
{
"blocks": 26,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 8.638430729189162e-05,
"errors": "",
"genproclimit": 1,
"networkhashps": 0.150264373447799,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
}
{
"walletversion": 61000,
"balance": 0.00000000,
"unconfirmed_balance": 0.00000000,
"immature_balance": 20000.00000000,
"txcount": 1,
"keypoololdest": 1500853103,
"keypoolsize": 1001,
"keys_left": 999,
"paytxfee": 0.00000000
}
Current block reward is 1,000 indeed? Why the large gap between 20,000 and 1,000?
Oh I see, this is the block size.
true
{
"blocks": 26,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 8.638430729189162e-05,
"errors": "",
"genproclimit": 1,
"networkhashps": 0.150264373447799,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
}
{
"walletversion": 61000,
"balance": 0.00000000,
"unconfirmed_balance": 0.00000000,
"immature_balance": 20000.00000000,
"txcount": 1,
"keypoololdest": 1500853103,
"keypoolsize": 1001,
"keys_left": 999,
"paytxfee": 0.00000000
}
Oh I see, this is the block size.
What did you do to show all this? I cannot see that with "getgenerate true"
getinfo
getmininginfo
Thank you.
Everything should be fine and I should be mining, but 30 minutes in I haven't found a block yet
not happy ,why mine a new coin so difficult..i am out 
santa@fanta:~/coins/biblepay/src# ./biblepay-cli getgenerate
true
{
"blocks": 26,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 8.638430729189162e-05,
"errors": "",
"genproclimit": 1,
"networkhashps": 0.150264373447799,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
}
{
"walletversion": 61000,
"balance": 0.00000000,
"unconfirmed_balance": 0.00000000,
"immature_balance": 20000.00000000,
"txcount": 1,
"keypoololdest": 1500853103,
"keypoolsize": 1001,
"keys_left": 999,
"paytxfee": 0.00000000
}
Current block reward is 1,000 indeed? Why the large gap between 20,000 and 1,000?
Oh I see, this is the block size.
true
{
"blocks": 26,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 8.638430729189162e-05,
"errors": "",
"genproclimit": 1,
"networkhashps": 0.150264373447799,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
}
{
"walletversion": 61000,
"balance": 0.00000000,
"unconfirmed_balance": 0.00000000,
"immature_balance": 20000.00000000,
"txcount": 1,
"keypoololdest": 1500853103,
"keypoolsize": 1001,
"keys_left": 999,
"paytxfee": 0.00000000
}
Oh I see, this is the block size.
What did you do to show all this? I cannot see that with "getgenerate true"
getinfo
getmininginfo
santa@fanta:~/coins/biblepay/src# ./biblepay-cli getgenerate
true
{
"blocks": 26,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 8.638430729189162e-05,
"errors": "",
"genproclimit": 1,
"networkhashps": 0.150264373447799,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
}
{
"walletversion": 61000,
"balance": 0.00000000,
"unconfirmed_balance": 0.00000000,
"immature_balance": 20000.00000000,
"txcount": 1,
"keypoololdest": 1500853103,
"keypoolsize": 1001,
"keys_left": 999,
"paytxfee": 0.00000000
}
Current block reward is 1,000 indeed? Why the large gap between 20,000 and 1,000?
Oh I see, this is the block size.
true
{
"blocks": 26,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 8.638430729189162e-05,
"errors": "",
"genproclimit": 1,
"networkhashps": 0.150264373447799,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
}
{
"walletversion": 61000,
"balance": 0.00000000,
"unconfirmed_balance": 0.00000000,
"immature_balance": 20000.00000000,
"txcount": 1,
"keypoololdest": 1500853103,
"keypoolsize": 1001,
"keys_left": 999,
"paytxfee": 0.00000000
}
Oh I see, this is the block size.
What did you do to show all this? I cannot see that with "getgenerate true"
Hi,
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere.
C/Program Files/Biblepay Core/daemon Quote
You can either leave the wallet running with gen=1 set in the config, or you can run the BiblePay headless daemon (biblepayd.exe).
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere.
Hi,
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere.
I am trying to mine in the wallet, but I am not getting any blocks although debug with command getgenerate does return true. How long can it take before I get a block?
Quote
You can either leave the wallet running with gen=1 set in the config, or you can run the BiblePay headless daemon (biblepayd.exe).
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere.
I am trying to mine in the wallet, but I am not getting any blocks although debug with command getgenerate does return true. How long can it take before I get a block?hi sir,look up you cpu ,did it use 100%,i also use windows wallet but cannt mine this coin ,my cpu 0%
My CPU says 3% ish. I have i7.
Hi,
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere. I am trying to mine in the wallet, but I am not getting any blocks although debug with command getgenerate does return true. How long can it take before I get a block?
Quote
You can either leave the wallet running with gen=1 set in the config, or you can run the BiblePay headless daemon (biblepayd.exe).
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere.
I am trying to mine in the wallet, but I am not getting any blocks although debug with command getgenerate does return true. How long can it take before I get a block?hi sir,look up you cpu ,did it use 100%,i also use windows wallet but cannt mine this coin ,my cpu 0%
Hi,
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere. I am trying to mine in the wallet, but I am not getting any blocks although debug with command getgenerate does return true. How long can it take before I get a block?
Quote
You can either leave the wallet running with gen=1 set in the config, or you can run the BiblePay headless daemon (biblepayd.exe).
where would I be able to find the headless deamon once I have installed the windows wallet? i looked everywhere.
I am trying to mine in the wallet, but I am not getting any blocks although debug with command getgenerate does return true. How long can it take before I get a block? 
so many 
on windows wallet ,i download it from Official website
on windows wallet ,i download it from Official website
thank you dev for you response, does anyone use windows wallet mine successsfully?
Where's can we find information regarding the team that is driving this?
The lead dev is not sure if he wants to unmask yet.
Why is that? Doesn't the lack of transparency prevent the potential for more people to trust your company / product?
type setgenerate true on debug from your official website windows wallet ,but my cpu use 0 .why
Try restarting wallet Cherry, then setgenerate over again, and also while it is re-running again, click Tools | Info | Open and scan debug log to see if miner crashed. I havent heard of it yet, but it could say something like biblepayminer thread exiting etc.
type setgenerate true on debug from your official website windows wallet ,but my cpu use 0 .why
A good concept. I will mine this later, a good way to spread the word of god and to help orphans. This community may grow. I still dont know how to mine.
"blocks": 24,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 0.0001952866346152673,
"errors": "",
"genproclimit": -1,
"networkhashps": 0.1233739072052518,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
i am minming now?
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 0.0001952866346152673,
"errors": "",
"genproclimit": -1,
"networkhashps": 0.1233739072052518,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
i am minming now?
Yes sir.
Also your blocks match my blocks.
Others: you can do the 'getgenerate' also to see if you are mining.
i use setgenerate true and put gen=1 in conf
but my cpu still using 0 is it normal?
Check out miner.cpp, the miner basically consumes one thread, and constantly hashes about 65535 times and then sleeps for a couple milliseconds then starts over with a new nonce. I really cant answer this exactly today, because CPUs have different core sizes and OSs might cause processes to sleep between thread interrupts etc. I suppose we will need to address this in a way where we allow the user to run the miner on all cores and consume as much processor as possible- Im all for being as fair as possible but I can assure you everyone is running the same miner.
"blocks": 24,
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 0.0001952866346152673,
"errors": "",
"genproclimit": -1,
"networkhashps": 0.1233739072052518,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
i am minming now?
"currentblocksize": 1000,
"currentblocktx": 0,
"difficulty": 0.0001952866346152673,
"errors": "",
"genproclimit": -1,
"networkhashps": 0.1233739072052518,
"pooledtx": 0,
"testnet": false,
"chain": "main",
"biblepay-generate": true
i am minming now?
Yes sir.
Also your blocks match my blocks.
Others: you can do the 'getgenerate' also to see if you are mining.
i use setgenerate true and put gen=1 in conf
but my cpu still using 0 is it normal?
Just got a message in the BiblePay inbox ([email protected]) that someone is running this on his sons AlienWare, so that is good news also.
any pool here ,i want to join BiblePay
You can still solo mine since the diff is so low.
That brings up an interesting point - should we support pools? For now, if someone wants to write a pool, you are welcome to go for it
.Blocks mature at height N+100.
Jump to: