Topic: [BIP] BipCoin. NOW LIVE. Mineable. CryptoNote. BipCot NoGov Licensed. - page 9. (Read 25052 times)
August 26, 2016, 04:14:22 PM
Will mine this, wallet downloaded.
August 26, 2016, 04:13:28 PM
August 26, 2016, 03:40:44 PM
Solo mine the fuck out of BipCoin this weekend. It's easy to solo mine now.
That will end for good in a few days when the pool goes back up
That will end for good in a few days when the pool goes back up
August 26, 2016, 02:00:57 PM
But Welcome montas101 hope to see you around the forum
Failed to parse arguments: unrecognised option 'server'
what do i do wrong ?
Sounds to me like you have a configuration file somewhere in there with bad options.
bipcoind.exe should run as is just by clicking the exe. it does for me
i did find it and now it works fine...
the problem was that i did make a file bipcoin.conf in the C:\Users\kostas\AppData\Roaming\bipcoin and that was wrong
thanks all foe the help.
August 26, 2016, 01:59:46 PM
How do i get network hashrate?
wait for our explorer to be back on line in a few days lol.
August 26, 2016, 01:50:14 PM
How do i get network hashrate?
August 26, 2016, 01:48:21 PM
But Welcome montas101 hope to see you around the forum
Failed to parse arguments: unrecognised option 'server'
what do i do wrong ?
Sounds to me like you have a configuration file somewhere in there with bad options.
bipcoind.exe should run as is just by clicking the exe. it does for me
August 26, 2016, 01:48:16 PM
Well, you could spend your bips here before you lose them. lol.
https://bipcoin.org/?page_id=82
Also, on this page:
https://bipcoin.org/?page_id=93
search
To see when a locked amount will become unlocked and available:
and
BACKING UP YOUR WALLET
https://bipcoin.org/?page_id=82
Also, on this page:
https://bipcoin.org/?page_id=93
search
To see when a locked amount will become unlocked and available:
and
BACKING UP YOUR WALLET
on https://bipcoin.org/?page_id=82 the image that says BIPCOIN ACCEPTED HERE needs to have the link attached to it removed :p just takes you to the original gigantic .png
(https://bipcoin.org/wp-content/uploads/2016/08/BipCoin_ACCEPTED_HERE-large-png-2.png)just sayin lol
EDIT NVM lol seems as though most the images are like that
everyone loves to look at pics :p August 26, 2016, 01:39:23 PM
Yes so far, solo mining has been fun. I have mined approximately 69 Bips in 2 days.
The problem that I have run into is this:
1st wallet, was mining and mined approximately 43 bips. then I noticed that while mining was starting to get errors and that the block-chain was not increasing. and none of my 43 bips were coming unlocked. Backed up my wallet, restarted it and still no change. I cleared out all the Block-chain files and restarted bipcoined and re-downloaded the block-chain and all seems to be going well. I re-loaded my backed up wallet file in simple wallet and it is showing a 0 balance, nothing in locked or unlocked.
If I open the wallet file in the GUI windows wallet it still shows the transactions for mining the coins, but it is still not showing them unlocked.
I am not sure what to do.
Usually for my knowledge all i need is the wallet file, yet I also noticed that it also creates and address file, I still have both.
I created a new wallet and have since been mining for approximately 10 hrs and have mined approximately 26 Bips.. I am worried about losing these ones as well.
Any ideas?
thanks in advance
The problem that I have run into is this:
1st wallet, was mining and mined approximately 43 bips. then I noticed that while mining was starting to get errors and that the block-chain was not increasing. and none of my 43 bips were coming unlocked. Backed up my wallet, restarted it and still no change. I cleared out all the Block-chain files and restarted bipcoined and re-downloaded the block-chain and all seems to be going well. I re-loaded my backed up wallet file in simple wallet and it is showing a 0 balance, nothing in locked or unlocked.
If I open the wallet file in the GUI windows wallet it still shows the transactions for mining the coins, but it is still not showing them unlocked.
I am not sure what to do.
Usually for my knowledge all i need is the wallet file, yet I also noticed that it also creates and address file, I still have both.
I created a new wallet and have since been mining for approximately 10 hrs and have mined approximately 26 Bips.. I am worried about losing these ones as well.
Any ideas?
thanks in advance
Well, you could spend your bips here before you lose them. lol.
https://bipcoin.org/?page_id=82
Also, on this page:
https://bipcoin.org/?page_id=93
search
To see when a locked amount will become unlocked and available:
and
BACKING UP YOUR WALLET
August 26, 2016, 01:29:31 PM
Yes so far, solo mining has been fun. I have mined approximately 69 Bips in 2 days.
The problem that I have run into is this:
1st wallet, was mining and mined approximately 43 bips. then I noticed that while mining was starting to get errors and that the block-chain was not increasing. and none of my 43 bips were coming unlocked. Backed up my wallet, restarted it and still no change. I cleared out all the Block-chain files and restarted bipcoined and re-downloaded the block-chain and all seems to be going well. I re-loaded my backed up wallet file in simple wallet and it is showing a 0 balance, nothing in locked or unlocked.
If I open the wallet file in the GUI windows wallet it still shows the transactions for mining the coins, but it is still not showing them unlocked.
I am not sure what to do.
Usually for my knowledge all i need is the wallet file, yet I also noticed that it also creates and address file, I still have both.
I created a new wallet and have since been mining for approximately 10 hrs and have mined approximately 26 Bips.. I am worried about losing these ones as well.
Any ideas?
thanks in advance
The problem that I have run into is this:
1st wallet, was mining and mined approximately 43 bips. then I noticed that while mining was starting to get errors and that the block-chain was not increasing. and none of my 43 bips were coming unlocked. Backed up my wallet, restarted it and still no change. I cleared out all the Block-chain files and restarted bipcoined and re-downloaded the block-chain and all seems to be going well. I re-loaded my backed up wallet file in simple wallet and it is showing a 0 balance, nothing in locked or unlocked.
If I open the wallet file in the GUI windows wallet it still shows the transactions for mining the coins, but it is still not showing them unlocked.
I am not sure what to do.
Usually for my knowledge all i need is the wallet file, yet I also noticed that it also creates and address file, I still have both.
I created a new wallet and have since been mining for approximately 10 hrs and have mined approximately 26 Bips.. I am worried about losing these ones as well.
Any ideas?
thanks in advance
It takes 60 blocks to unlock miner tx (2 hours).
Also when opening simplewallet, run command reset - it will reset and reload all transactions from blockchain.
August 26, 2016, 01:28:33 PM
i did try to run the cli the bipcoin.exe in windows 10 64bit but it starts and close so fast that i can not see what is wrong.
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
Are you just double-clicking the file? It needs to be run from the command line.
hi all
i did that and it do the same thing again...close real fast
Running an .exe File via Command Prompt
http://www.howtogeek.com/209694/running-an-.exe-file-via-command-prompt/
That way at least you'll see some error messages that will help us figure out what's wrong.
August 26, 2016, 01:27:03 PM
But Welcome montas101 hope to see you around the forum
Failed to parse arguments: unrecognised option 'server'
what do i do wrong ?
August 26, 2016, 01:24:53 PM
August 26, 2016, 01:23:01 PM
i did try to run the cli the bipcoin.exe in windows 10 64bit but it starts and close so fast that i can not see what is wrong.
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
Are you just double-clicking the file? It needs to be run from the command line.
hi all
i did that and it do the same thing again...close real fast
What do you mean by close real fast? Do you just get a prompt with no error message?
August 26, 2016, 01:17:41 PM
*********Update********
I am not sure how I missed it when reading the How to the forst or second time but I see where it says not to have the CLI wallet and the GUI wallet open at the same time and I do beleive that at one time I did do that before i started to have my errors with my wallet.
the how to says that it can cause some errors, my question is: can these errors be corrected?
I am not sure how I missed it when reading the How to the forst or second time but I see where it says not to have the CLI wallet and the GUI wallet open at the same time and I do beleive that at one time I did do that before i started to have my errors with my wallet.
the how to says that it can cause some errors, my question is: can these errors be corrected?
August 26, 2016, 01:16:43 PM
i did try to run the cli the bipcoin.exe in windows 10 64bit but it starts and close so fast that i can not see what is wrong.
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
Are you just double-clicking the file? It needs to be run from the command line.
hi all
i did that and it do the same thing again...close real fast
August 26, 2016, 01:11:54 PM
i did try to run the cli the bipcoin.exe in windows 10 64bit but it starts and close so fast that i can not see what is wrong.
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
Are you just double-clicking the file? It needs to be run from the command line.
August 26, 2016, 01:09:55 PM
i did try to run the cli the bipcoin.exe in windows 10 64bit but it starts and close so fast that i can not see what is wrong.
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
I will let the others try and help on this one. (if it pops up dos box and closes try opening a cmd prompt and changing to the wallet folder and executing the bipcoin.exe from the dos box. that way it wont close the dos box and you can see what its saying on exit)
But Welcome montas101 hope to see you around the forum
August 26, 2016, 01:05:43 PM
i did try to run the cli the bipcoin.exe in windows 10 64bit but it starts and close so fast that i can not see what is wrong.
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
i did install gui wallet just fine.
but now that the site is down i cannot mine.
can some one help me?
thanks
August 26, 2016, 12:54:42 PM
Must be my lucky day. 12 blocks in 12 hours with just 2 threads on my stock clocked i5-2500k.
Jump to: