Bitburner Fury - Hashrate Protection - page 19.

Min€r

sr. member

Activity: 359

Merit: 250

Quote from: shapemaker on October 08, 2013, 04:57:33 AM

Quote from: Roy Badami on October 08, 2013, 04:53:03 AM

Quote from: shade88 on October 08, 2013, 04:33:49 AM

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

That's a shame. I was hoping that 64+ GH/s might still be achievable. Has burnin/cryptx confirmed that the boards will not do 64 GH/s ?

Tbh I rather take the 100 euros per board back than a few GH/s more. Best way to cut losses I think.

Hashrate protection is one thing but not getting the boards is a real big loss - now they are mining with client paid hardware & not sending them out. I got tracking but they never shipped it - CryptX what is with this clients - will you send them some BTC each for loss of one week mining?

shade88

member

Activity: 119

Merit: 10

I email them by replying to my order email and ask simple polite question. They usually reply the next day.

Right now I prefer more hash than refund. All in Cheesy

shapemaker

full member

Activity: 238

Merit: 100

I run Linux on my abacus.

Quote from: Roy Badami on October 08, 2013, 04:53:03 AM

Quote from: shade88 on October 08, 2013, 04:33:49 AM

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

That's a shame. I was hoping that 64+ GH/s might still be achievable. Has burnin/cryptx confirmed that the boards will not do 64 GH/s ?

Tbh I rather take the 100 euros per board back than a few GH/s more. Best way to cut losses I think.

Roy Badami

hero member

Activity: 563

Merit: 500

Quote from: shade88 on October 08, 2013, 04:33:49 AM

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

That's a shame. I was hoping that 64+ GH/s might still be achievable. Has burnin/cryptx confirmed that the boards will not do 64 GH/s ?

roy

Min€r

sr. member

Activity: 359

Merit: 250

Quote from: shade88 on October 08, 2013, 04:33:49 AM

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

How you contacted them (not getting a message back via mail)?

mccampser

sr. member

Activity: 290

Merit: 250

Quote from: shade88 on October 08, 2013, 04:33:49 AM

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

whats your order# ?

Josue

member

Activity: 63

Merit: 10

Quote from: shade88 on October 08, 2013, 04:33:49 AM

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

What is your order number?

Thanks!

shade88

member

Activity: 119

Merit: 10

It's seems the hashrate protection is active. I ask them to add another board rather than € refund but they said boards already sold out for now and my order will ship in a few hours.

Roy Badami

hero member

Activity: 563

Merit: 500

Quote from: burnin on October 07, 2013, 09:41:24 PM

New Firmware version:

https://www.dropbox.com/s/zn94oofozdn0eqb/BitBurnerFury_08.10.13.hex

Has to be used in conjuction with this cgminer fork:

https://github.com/someone42/cgminer.git

Should fix CAN connection issues and USB-write errors.

Note that you need to specify 16 miners per board on the BUS in the --avalon-options.

AFAICS there are changes in the way voltage selection is done in this new driver.

I think you now specify the true voltage with a new argument, i.e. for standard (not overvolted) operation:

Code:

--bitburner-fury-voltage 900

But I could be wrong. Hopefully @someone42 or @burnin will confirm soon. Until then I suggest caution.

roy

EDIT: Please ignore for now - AIUI no change in how you use this version

rage1337

hero member

Activity: 503

Merit: 502

Quote from: juve4v on October 07, 2013, 05:32:51 PM

rage1337: How do you cool your chips for the OC profile? You run them on water/air ? Also ty for the windows guide!

Air cooled with a 12V 0,75A Fan. Later i try a better positioning of the fan to improve the active cooling

burnin

sr. member

Activity: 243

Merit: 250

ALTCOM Ab9upXvD7ChnJxDRZgMmwNNEf1ftCGWrsE

New Firmware version:

https://www.dropbox.com/s/zn94oofozdn0eqb/BitBurnerFury_08.10.13.hex

Has to be used in conjuction with this cgminer fork:

https://github.com/someone42/cgminer.git

Should fix CAN connection issues and USB-write errors.

Note that you need to specify 16 miners per board on the BUS in the --avalon-options.

Tursk

member

Activity: 92

Merit: 10

Quote from: darkfriend77 on October 07, 2013, 02:56:46 PM

... does this avalon-auto and freq stuff work?

is it like an auto tune?

./cgminer --config bitburner.conf --avalon-auto --avalon-freq 275 --avalon-temp 55 --avalon-cutoff 65 --avalon-options 115200:16:10:d:275 --bitburner-voltage 1300

I didn't get it running with those options.

Once the board starts working it'll work fine. 50GH/s is steady now with --avalon-options 115200:16:10:d:290 --bitburner-voltage 1400, temperature 53-54C.

It's difficult to try different options as it usually starts spewing those 'usb_write error on avalon_write' lines and won't work until after complete restart. I haven't managed to reflash firmware yet with pic32prog.

Getting it working is not about running as root or normal user either. Right now it's running after rebooting PC as normal autologging user.

Picmin

newbie

Activity: 23

Merit: 0

mine was order no. #105x Ordered on 15. Sep 2013 and picked up by fedex 10/04/2013 - (Friday)

without flashing the firmware and with small OC (freq 272 voltage 1330) i reach 50-51 Gh/s at diff 62 ... hw ~ 2%
Not bad but very far of 64gh/s ! Angry

I suspect the first boards shipped to not be fully functionnal Tongue

Code:

minepeon@minepeon ~ $ screen -x
cgminer version 3.5.0 - Started: [2013-10-07 23:12:12]
--------------------------------------------------------------------------------
(5s):47.76G (avg):50.51Gh/s | A:19750 R:197 HW:426 WU:705.4/m
ST: 2 SS: 0 NB: 2 LW: 28102 GF: 0 RF: 0
Connected to stratum.bitcoin.cz diff 62 with stratum as user xxx
Block: 000256152d39cfb6... Diff:189M Started: [23:12:19] Best share: 34.4K

[P]ool management [S]ettings [D]isplay options [Q]uit
BTB 0: 48C 272 1049mV | 50.26G/50.51Gh/s | A:19750 R:197 HW:426 WU: 705.6/m

[2013-10-07 23:53:13] Accepted 03554ec6 Diff 76/62 BTB 0 pool 0
[2013-10-07 23:53:16] Accepted 0265a660 Diff 106/62 BTB 0 pool 0
...

juve4v

hero member

Activity: 505

Merit: 500

Quote from: Min€r on October 07, 2013, 04:19:38 PM

Quote from: server on October 07, 2013, 03:58:32 PM

What's going on boys ?

"Expected shipping date 1-10-2013" but still nothing shipped ?!?

exactly the same thing here (same date, time,....).

Same here also, ordered on 16th.

juve4v

hero member

Activity: 505

Merit: 500

rage1337: How do you cool your chips for the OC profile? You run them on water/air ? Also ty for the windows guide!

rage1337

hero member

Activity: 503

Merit: 502

short setup guide for windows:

- supply 12VDC to the bitburner
- connect the Bitburner Fury via USB

Firmware update (optional):

You need
https://www.dropbox.com/s/y6p0twf3rzt03id/PIC32UBL.exe

and the newest firmware
https://www.dropbox.com/s/fvc970hel90qwgd/bitburner-fury-firmware_1.2.4.hex

- start PIC32UBL.exe , click enable USB, now start the Miner! between the first 1-5seconds click on "connect"

If the Miner is connected click on "Load Hex File" and pick the newest firmware. Now "Erase-Program-Verify".
As soon as the miner is finished click on "disconnect" and restart the miner

install USB Driver and setup cgminer:

supply the 12VDC to the miner and wait 10 seconds

You need Zadig:
http://zadig.akeo.ie/

start Zadig, Options -> List all devices

Install WinUSB drivers

Now download cgminer 3.5.0
http://ck.kolivas.org/apps/cgminer/

create a shortcut from cgminer-nogpu.exe . rightclick -> properties
at Target: add:

-o your pool -u your worker -p your pw --avalon-options 115200:16:10:d:256 --bitburner-voltage 1230

start cgminer, done!

normal settings
--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230

OC, active cooling required!
--avalon-options 115200:16:10:d:290 --bitburner-voltage 1400

My bitburner runs stable at 52GH/s with the OC settings (chip temp 52-54°C)

I translated it realy fast, so excuse me

Min€r

sr. member

Activity: 359

Merit: 250

Quote from: server on October 07, 2013, 03:58:32 PM

What's going on boys ?

"Expected shipping date 1-10-2013" but still nothing shipped ?!?

exactly the same thing here (same date, time,....).

server

legendary

Activity: 892

Merit: 1002

1 BTC =1 BTC

What's going on boys ?

"Expected shipping date 1-10-2013" but still nothing shipped ?!?

darkfriend77

sr. member

Activity: 434

Merit: 265

... does this avalon-auto and freq stuff work?

is it like an auto tune?

./cgminer --config bitburner.conf --avalon-auto --avalon-freq 275 --avalon-temp 55 --avalon-cutoff 65 --avalon-options 115200:16:10:d:275 --bitburner-voltage 1300

mikep2012

sr. member

Activity: 362

Merit: 250

wonder if ill get mine on the second week as promised/advertised.

p.s. also any news about those hashrate refunds?

Topic: Bitburner Fury - Hashrate Protection - page 19. (Read 250151 times)