Bitburner Fury - Hashrate Protection - page 20.

Starcraftman

newbie

Activity: 58

Merit: 0

Quote from: Tursk on October 07, 2013, 02:21:10 PM

Quote from: Starcraftman on October 07, 2013, 02:19:04 PM

Quote from: Tursk on October 07, 2013, 02:11:42 PM

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

https://www.burninmining.com/news/

Thanks.

mameise

hero member

Activity: 561

Merit: 500

Quote from: Tursk on October 07, 2013, 02:21:10 PM

Quote from: Starcraftman on October 07, 2013, 02:19:04 PM

Quote from: Tursk on October 07, 2013, 02:11:42 PM

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

https://www.burninmining.com/news/

So its only needed when stacking more together as far as i see. so with one there is no need for that?

well actually it seems to run. i will wait some more minutes with the happy jump

Thanks for help!

Tursk

member

Activity: 92

Merit: 10

Quote from: Starcraftman on October 07, 2013, 02:19:04 PM

Quote from: Tursk on October 07, 2013, 02:11:42 PM

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

https://www.burninmining.com/news/

Starcraftman

newbie

Activity: 58

Merit: 0

Quote from: Tursk on October 07, 2013, 02:11:42 PM

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

Tursk

member

Activity: 92

Merit: 10

Quote from: coin@coin on October 07, 2013, 01:55:04 PM

Can you confirm the hashing speed of your board/s? Thanks in advance. Cheesy

Code:

--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
BTB 0: 48C 256 944mV | 44.60G/44.67Gh/s | A:40558 R:378 HW:3735 WU:624.1/m
--------------------------------------------------------------------------------

This is with the options recommended here
--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230

I don't dare to overclock the board yet, as the package was missing these:
Mounting bolts
Cooling fan & mounting brackets (one for every 2nd board)

Package had only Bitburner Fury with heatsink and USB cable. Nothing else, no instructions nor fan or bolts.

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

Luckily I had one extra Arctic fan lying around, so the board works now. HW error count seems quite high though.

Tursk

member

Activity: 92

Merit: 10

Quote from: darkfriend77 on October 07, 2013, 05:08:24 AM

Quote from: someone42 on October 07, 2013, 04:14:34 AM

Quote from: darkfriend77 on October 07, 2013, 04:02:31 AM

Getting a USB write Error ...

I don't know what version of firmware you're using, but try using this one:
https://www.dropbox.com/s/fvc970hel90qwgd/bitburner-fury-firmware_1.2.4.hex

For instructions on updating firmware, see:
http://www.burninmining.com/assembly-instructions-part-2/

How about instructions what is the correct procedure with pic32prog on Linux?

Quote from: darkfriend77 on October 07, 2013, 04:02:31 AM

I have done that successfully!

But still I don't get any better results .... still usb_write error ...

I tried on the notebook and even there I'm not able to get with cgminer.3.5. a working connection ...

I did get cgminer working when I tried to run it as root and not as an ordinary user; adding plugdev group privilege did not help.
Maybe it's this Debian wheezy and it's ancient usb libraries.

I'm using cgminer from
https://github.com/someone42/cgminer

coin@coin

legendary

Activity: 1722

Merit: 1000

Quote from: Tursk on October 07, 2013, 01:53:35 PM

Quote from: tarmi on October 07, 2013, 04:30:36 AM

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Yes.

Quote

Or boards did show out of nowhere?

Fedex almost fucked up, but after enough complaining persuaded them I need it TODAY and got the board on an evening delivery at work.

Can you confirm the hashing speed of your board/s? Thanks in advance. Cheesy

Tursk

member

Activity: 92

Merit: 10

Quote from: tarmi on October 07, 2013, 04:30:36 AM

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Yes.

Quote

Or boards did show out of nowhere?

Fedex almost fucked up, but after enough complaining persuaded them I need it TODAY and got the board on an evening delivery at work.

kernel_panic

newbie

Activity: 41

Merit: 0

Quote from: mtbitcoin on October 07, 2013, 01:22:47 PM

Quote from: FlappySocks on October 07, 2013, 11:49:10 AM

I got, like others, a tracking number last week.

Why would you set up a tracking number at least a week in advance, other than to let your customer think progress is being made? (this is a common trick, and ends up being shipped under a different consignment number)

Was there a problem with production? Are they "Testing" the boards a bit longer while the forms are down?

Looks like I am in the same boat as yours. Got the tracking number last week but still no delivery Undecided

Me too.
There are two things that cryptx copied from avalon. Shit communication and shipping logistics.

Sending out FedEx notifications to all of the orders last week and now getting fuck all..... that's like spit in your face, really very insulting.
And let's not forget the excellent communication abilities... yeah maybe spamming them with requests on the shipping status is my new job now because I have nothing better to do.

Meanwhile here's a nice link you can study while waiting for your "miner" http://www.eccbelgium.be/

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: FlappySocks on October 07, 2013, 11:49:10 AM

I got, like others, a tracking number last week.

Why would you set up a tracking number at least a week in advance, other than to let your customer think progress is being made? (this is a common trick, and ends up being shipped under a different consignment number)

Was there a problem with production? Are they "Testing" the boards a bit longer while the forms are down?

Looks like I am in the same boat as yours. Got the tracking number last week but still no delivery Undecided

And sadly no communication or email replies

fydel

hero member

Activity: 522

Merit: 500

Hasta la Bitcoin siempre!

Quote from: mameise on October 07, 2013, 12:59:44 PM

I got mine today but no idea how to setup... there are also 3 leds on it that all blink when i start cgminer... did anyone set one up and could give a short tut for it? Would be nice Wink

can't find anything about it yet..

I think you should use the latest cgminer 3.5.

On Windows you need to install the WinUSB driver with the help of zdiag.

On the raspberry I compiled cgminer with "--enable-icarus --enable-bitfury --enable-avalon". But I dont know if all the three are mandatory.

Add "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230" as parameters.

mameise

hero member

Activity: 561

Merit: 500

I got mine today but no idea how to setup... there are also 3 leds on it that all blink when i start cgminer... did anyone set one up and could give a short tut for it? Would be nice Wink

can't find anything about it yet..

FlappySocks

hero member

Activity: 546

Merit: 500

Im #103x and not seen anything. Angry

fydel

hero member

Activity: 522

Merit: 500

Hasta la Bitcoin siempre!

Quote from: mccampser on October 07, 2013, 12:34:13 PM

Quote from: fydel on October 07, 2013, 12:04:52 PM

Quote from: FlappySocks on October 07, 2013, 10:50:42 AM

Quote from: tarmi on October 07, 2013, 04:30:36 AM

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Or boards did show out of nowhere?

Anyone?

I got an eMail on Friday from asic-hardware.com stating that the order was shipped. Fedex tracking was updated, too.

which ordner# ?

I was order no. #107X. Ordered on 15. Sep 2013.

mccampser

sr. member

Activity: 290

Merit: 250

Quote from: fydel on October 07, 2013, 12:04:52 PM

Quote from: FlappySocks on October 07, 2013, 10:50:42 AM

Quote from: tarmi on October 07, 2013, 04:30:36 AM

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Or boards did show out of nowhere?

Anyone?

I got an eMail on Friday from asic-hardware.com stating that the order was shipped. Fedex tracking was updated, too.

which ordner# ?

fydel

hero member

Activity: 522

Merit: 500

Hasta la Bitcoin siempre!

Quote from: FlappySocks on October 07, 2013, 10:50:42 AM

Quote from: tarmi on October 07, 2013, 04:30:36 AM

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Or boards did show out of nowhere?

Anyone?

I got an eMail on Friday from asic-hardware.com stating that the order was shipped. Fedex tracking was updated, too.

FlappySocks

hero member

Activity: 546

Merit: 500

I got, like others, a tracking number last week.

Why would you set up a tracking number at least a week in advance, other than to let your customer think progress is being made? (this is a common trick, and ends up being shipped under a different consignment number)

Was there a problem with production? Are they "Testing" the boards a bit longer while the forms are down?

eraziel

full member

Activity: 154

Merit: 100

Keep giving money to assholes, way to go

Fyuri

newbie

Activity: 54

Merit: 0

Quote from: paul3 on October 07, 2013, 10:51:37 AM

Quote from: mruiter on October 07, 2013, 05:26:07 AM

Quote from: tarmi on October 07, 2013, 05:22:12 AM

A reminder of what cryptx said:

Every order made before septembar 17th will be delivered in the first week of october.

Well, mine was directly after coupon processing on the 15th.

So that's a fail for on time for my order Wink

+1. Same for me, order 15th sep. No boards received.

Same for me too, order 15th sep. No boards received, no tracking number from FEDEX... Angry

FlappySocks

hero member

Activity: 546

Merit: 500

I ordered on the 15th too. I e-mailed cryptx over a week ago, to cancel as im fed up with the lack of info. These are unlikely to ROI anyway.

I have not heard anything. Not sure what to do now. Doing a chargeback, and going after burnin for my 50%?

Topic: Bitburner Fury - Hashrate Protection - page 20. (Read 250151 times)