Pages:
Author

Topic: Bitcoin Gold Mining [Miners and suggestions] - page 4. (Read 11681 times)

full member
Activity: 196
Merit: 100
Wow - running HOTTTT

GPU shot up to 91C - fans not spinning up past 22%. What gives? Ubuntu + Claymore

I have the same setup for ETH and it runs just dandy.

Scary
newbie
Activity: 10
Merit: 0
Thanks

I get "ZEC: Share rejected".  Any ideas?

My Bat:
set GPU_FORCE_64BIT_PTR=1
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
ZecMiner64.exe -zpool btg.minertopia.org:5555 -zwal GL4wka3YFjUaNjLLVVMMTXzWKCQxQErVzy.jakbal -zpsw ballas -allpools 1


╔════════════════════════════════════════════════════════════════╗
║           Claymore's ZCash AMD GPU Miner v12.0 Beta            ║
╚════════════════════════════════════════════════════════════════╝

ZEC: 1 pool is specified
Main ZCash pool is btg.minertopia.org:5555

Catalyst 15.12 is REQUIRED for best performance and compatibility
15.12 does not support some Fiji cards, use 16.3.2 for them
For 4xx cards (Polaris) Crimson 16.12.2 is recommended

At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload
ools
NOTE: miner uses 3000 rounds to calculate average speed, so it may take about a
minute to get correct speed.
OpenCL initializing...
AMD Cards available: 1
GPU #0: Tonga, 2048 MB available, 28 compute units
GPU #0 recognized as Radeon 285/380/380X
POOL version
GPU #0 is going to use too high intensity (6), not enough memory, intensity val
e reduced (3)
GPU #0 algorithm ASM, intensity 3
Total cards: 1
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - connecting to 'btg.minertopia.org' <66.70.247.148> port 5555 (un
ecure)
ZEC: Stratum - Connected (btg.minertopia.org:5555) (unsecure)
Pool sets new share target: 0x00080000 (diff: 8191H)
ZEC: Share rejected!
ZEC: Authorized
newbie
Activity: 10
Merit: 0
Thanks

I get "ZEC: Share rejected".  Any ideas?

My Bat:
set GPU_FORCE_64BIT_PTR=1
set GPU_MAX_HEAP_SIZE=100
set GPU_USE_SYNC_OBJECTS=1
set GPU_MAX_ALLOC_PERCENT=100
set GPU_SINGLE_ALLOC_PERCENT=100
ZecMiner64.exe -zpool btg.minertopia.org:5555 -zwal GL4wka3YFjUaNjLLVVMMTXzWKCQxQErVzy.jakbal -zpsw ballas -allpools 1

legendary
Activity: 1274
Merit: 1000
So there aint any exchanges supporting BTG deposit/withdraw yet huh?
Nope. You have something confirmed yet?

2/3 of 0.07 BTG is confirmed on suprnova, seems bit slower than for example ZEN which iv been mining over their pool.

same it confirmed for me so far on minertopia with a new BTG address well see once it pays out if i get or not ...

legendary
Activity: 1274
Merit: 1000
to set up my BAT file.  I'm not registered, what do I use as a worker? BTG address?


you can't register there you have to use a BTG wallet Address in a bat file some thing like this
for EWBF's CUDA Zcash miner call it lets say

Code:
minertopia.bat

Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 1
miner.exe --server btg.minertopia.org --user  your BTG wallet address goes here.after the dot name the worker what ever to want to see it by on the pool --pass Password can be anything  --port 5555  --cuda_devices 0 1 2 3


for clay more
Code:
minertopia.bat

Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 1
ZecMiner64.exe -zpool btg.minertopia.org:5555 -zwal your BTG wallet address goes here.after the dot name the worker what ever to want to see it by on the pool  -zpsw Password can be anything -allpools 1

run those from the software miners folder or make a short cut in the folder rename it to what you like an then right click the bat file shortcut and send it to desktop ..

I use Awesome miner for faster setup it was worth what I paid for it to me .

http://www.awesomeminer.com/

https://bitcointalksearch.org/topic/awesome-miner-powerful-windows-gui-to-manage-and-monitor-up-to-200000-miners-676942
newbie
Activity: 62
Merit: 0
So there aint any exchanges supporting BTG deposit/withdraw yet huh?
Nope. You have something confirmed yet?

2/3 of 0.07 BTG is confirmed on suprnova, seems bit slower than for example ZEN which iv been mining over their pool.
full member
Activity: 226
Merit: 100
So there aint any exchanges supporting BTG deposit/withdraw yet huh?
Nope. You have something confirmed yet?
newbie
Activity: 62
Merit: 0
So there aint any exchanges supporting BTG deposit/withdraw yet huh?
newbie
Activity: 10
Merit: 0
to set up my BAT file.  I'm not registered, what do I use as a worker? BTG address?
legendary
Activity: 1274
Merit: 1000
not sure what you mean

How do I get "address.worker" on Minertopia?


do you mean how do you see the stats ?

This page should explain it all

https://btg.minertopia.org/getting_started

check your worker stats here with your newly made BTG address ...

https://btg.minertopia.org/workers


set your common line for Minertopia something like this .

Claymore Dual Miner

ZecMiner64.exe -zpool btg.minertopia.org:5555 -zwal YourUsername.YourWorker -zpsw YourWorkerPass -allpools 1


EWBF's CUDA Zcash miner

miner.exe --server btg.minertopia.org --user address.worker --pass x --port 5555  --cuda_devices 0 1 2 3

I'm don't know which soft ware miner your gonna use i usually only use

Claymore for my Amd Cards an EWBF's CUDA Zcash miner for my NV Cards.



 


newbie
Activity: 10
Merit: 0
it seems you can mine on

Minertopia

https://btg.minertopia.org/  so far just that short time  Immature: 0.02562446 well see if passes to a balance in a bit ....
 

an I can see the stats and it appears to be going on my wallet ...... according to awesome miner which I use to monitor everything i mine I'm making 52 bucks a day with three rigs which i don't find hard to believe right now till it really starts ...then that will drop a lot .


Have not set up wallet yet, will store on suprnova till I can find a wallet I trust

there is five trusted wallets atm that are supporting  BTG  look here https://bitcoingold.org/ an at the top of the page hit the ECOSYSTEM link or http://bitcoingold.org/#ecosystem ....


That's it for me, to nite gonna leave my rigs on https://btg.minertopia.org/ for a while an see how that goes and off to bed i think ....

GN all and GL mining BTG ....

How do I get "address.worker" on Minertopia?
legendary
Activity: 1274
Merit: 1000
it seems you can mine on

Minertopia

got that in a email ..

Have not set up wallet yet, will store on suprnova till I can find a wallet I trust

there is five trusted wallets atm that are supporting  BTG  look here https://bitcoingold.org/ an at the top of the page hit the ECOSYSTEM link or http://bitcoingold.org/#ecosystem ....


That's it for me, to nite gonna leave my rigs on https://btg.minertopia.org/ for a while an see how that goes and off to bed i think ....

GN all and GL mining BTG ....
full member
Activity: 378
Merit: 135
Have not set up wallet yet, will store on suprnova till I can find a wallet I trust
newbie
Activity: 232
Merit: 0
yeah it would open and close on me too i just started over downloaded the miner
again then re did the bat file and it works


im using suprnova.cc  and for wallet im using CoinoMi on desktop threw android app called bluestacks
that lets you use android apps on desktop

how would one go about double checking to make sure there BTG address is working?
I would assume mine is working cause before the MAINNET went live Suprnova wouldnt
let me enter my Coinomi wallet address, now it works and lets me enter it ? so time will tell???
full member
Activity: 378
Merit: 135
Just started working for me and accepting shares
newbie
Activity: 50
Merit: 0
eu.btgpool.pro:3857 

is working just fine
full member
Activity: 226
Merit: 100
Add "pause" to the end of your bat, and you will see "cannot connect to the pool".
full member
Activity: 378
Merit: 135
Im pretty sure this is correct right?  only removed my login details

miner --server btg.suprnova.cc --port 8816 --user username.rigname --pass x


full member
Activity: 672
Merit: 154
Blockchain Evangelist.
My EWBF cmd window opens then just closes out?  What is wrong?

The same here. I think the problem is related to pool connection.
full member
Activity: 392
Merit: 101
My EWBF cmd window opens then just closes out?  What is wrong?

sounds like your server details are wrong in the .bat
Pages:
Jump to: